The error messages are quoted in the first posting of this thread:
??2018-11-02 17:56:07.851 [ INFO]:subscription: 0074: "scan" subscribing to mux "402MHz", weight: 6, adapter: "SAT>IP DVB-C Tuner #1 (10.0.0.1@UDP)", network: "DVB-C Netzwerk", service: "Raw PID Subscription"
2018-11-02 17:56:07.851 [ INFO]:mpegts: 610MHz in DVB-C Netzwerk - tuning on SAT>IP DVB-C Tuner #2 (10.0.0.1@UDP)
2018-11-02 17:56:07.851 [ INFO]:subscription: 0075: "scan" subscribing to mux "610MHz", weight: 6, adapter: "SAT>IP DVB-C Tuner #2 (10.0.0.1@UDP)", network: "DVB-C Netzwerk", service: "Raw PID Subscription"
2018-11-02 17:56:07.851 [ INFO]:mpegts: 434MHz in DVB-C Netzwerk - tuning on SAT>IP DVB-C Tuner #3 (10.0.0.1@UDP)
2018-11-02 17:56:07.851 [ INFO]:subscription: 0076: "scan" subscribing to mux "434MHz", weight: 6, adapter: "SAT>IP DVB-C Tuner #3 (10.0.0.1@UDP)", network: "DVB-C Netzwerk", service: "Raw PID Subscription"
2018-11-02 17:56:07.851 [ INFO]:mpegts: 362MHz in DVB-C Netzwerk - tuning on SAT>IP DVB-C Tuner #4 (10.0.0.1@UDP)
2018-11-02 17:56:07.851 [ INFO]:subscription: 0077: "scan" subscribing to mux "362MHz", weight: 6, adapter: "SAT>IP DVB-C Tuner #4 (10.0.0.1@UDP)", network: "DVB-C Netzwerk", service: "Raw PID Subscription"
2018-11-02 17:56:12.850 [ INFO]:mpegts: 362MHz in DVB-C Netzwerk - scan no data, failed
2018-11-02 17:56:12.850 [ INFO]:subscription: 0077: "scan" unsubscribing
2018-11-02 17:56:12.851 [ INFO]:mpegts: 434MHz in DVB-C Netzwerk - scan no data, failed
2018-11-02 17:56:12.851 [ INFO]:subscription: 0076: "scan" unsubscribing
2018-11-02 17:56:12.851 [ INFO]:mpegts: 610MHz in DVB-C Netzwerk - scan no data, failed
2018-11-02 17:56:12.851 [ INFO]:subscription: 0075: "scan" unsubscribing
2018-11-02 17:56:12.851 [ INFO]:mpegts: 402MHz in DVB-C Netzwerk - scan no data, failed
2018-11-02 17:56:12.851 [ INFO]:subscription: 0074: "scan" unsubscribing??
All affected systems are in the same subnet.
I already copied the config from the HTPC to the second system, but without success - the problem persisted. Tomorrow, I am going to check the running processes and used ports again,
Kind regards,
Yann