I recently discovered that DVB signals could be used as a time source, and decided to try adding it as a time source to my local NTP server.

Note that this does not work with openntpd, as it requires the SHMem ntp driver.

In tvheadend go to Configuration -> General -> Base, and check "Enable NTP driver.

Chrony configuration:
add the following to /etc/chrony/chrony.conf


refclock SHM 0:perm=0600 poll 0 refid TVH0
refclock SHM 2:perm=0666 poll 0 refid TVH2

TVH0 is for when tvheadend is run as root.
TVH2 is for when tvheadend is run as non-root.
The permission settings are inferred from code in tvhtime.c (https://github.com/tvheadend/tvheadend/blob/66d6161c563181e5a572337ab3509a835c5a57e2/src/tvhtime.c)

The poll parameter is necessary to disable chrony's median filter (see update 2)

I checked this using ipcs -m. Tvheadend creates the shared memory segment, and starting chrony increments the nattach by one (was 0 at beginning).

------ Shared Memory Segments -------- key shmid owner perms bytes nattch status 0x4e545032 36 tvheadend 666 96 1

Note that the owner is the uid of the owning process, and that if chrony is started before tvheadend tries updating the time, chrony will be the owner.

And now the real question: Does it actually work?
As of now, I honestly have no idea, I came up with these theoretical checks, but don't know how to practically check...

If anyone familiar with chrony could give me a hint about how to check, I'd be grateful.

update:I was wrong, the nattach number should be 2 (chronyd + tvheadend). Which it just became. So the SHM config works! I still don't know if chrony takes any data from it though...

update 2: chrony receives the data. So it works.


chronyc> sources
210 Number of sources = 1
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
#? TVH2                          0   0     0   473  +2803ms[+2803ms] +/-   49n

Note the LastRx value. :)
Unfortunately the TOT/TDT tables come in so rarely, that it isn't deemed by default a good source. Updated the config to make chrony use it.