Hi!

I now tried for about 2 days to get this bloody thing working.
I installed tvheadend as a package.
I also installed the firmeware for the dvbs stick. (http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_DVB-S2_Stick_(460e)) When I open the webgui of tvheadend only one mux is shown in the stats and the logger always says:
* diseqc setup failed -1*
uname -a

Linux raspberrypi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux

lsusb -v:

Bus 001 Device 004: ID 2013:024c PCTV Systems Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2013 PCTV Systems idProduct 0x024c bcdDevice 1.00 iManufacturer 1 PCTV Systems iProduct 2 PCTV 460e iSerial 3 00000006EHP8 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 41 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x03ac 1x 940 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered)

dmesg | grep dvb


[    7.720941] em28174 #0: dvb set to isoc mode.
[    7.902876] em28174 #0: Successfully loaded em28xx-dvb
[    7.923571] Em28xx: Initialized (Em28xx dvb Extension) extension
[   60.030581] i2c i2c-3: tda10071: downloading firmware from file 'dvb-fe-tda10071.fw'

Any idea what to do?

thx

ps:under windows is the stick working fine