Project

General

Profile

Bug #5832

TBS6205 not have SNR in few Frecuence DVB-T2 Colombia

Added by Castor 007 23 days ago. Updated 12 days ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
DVB
Target version:
-
Start date:
2019-12-29
Due date:
% Done:

0%

Estimated time:
Found in version:
HTS Tvheadend 4.2.8-36~g5bdcfd8
Affected Versions:

Description

Tvheadend does not deliver SNR on several frequencies in DVB-T2 Colombia, I do not understand why
Already change version of linux, 16.04, 18.04 install tvheadend again and the problem persists ... I expose photos and logs

History

#1

Updated by Castor 007 23 days ago

2019-12-29 14:14:28.081 http: 10.0.108.253: using ticket 622ED60E46D567CE3359BB7E1B610FC28F4DF7F9 for /stream/mux/8ac12b36df0d5d88df5754cdd64028e7
2019-12-29 14:14:28.082 mpegts: 479MHz in Nacionales - tuning on TurboSight TBS 6205 DVB-T/T2/C #2 : DVB-T #0
2019-12-29 14:14:28.082 subscription: 17E0: "HTTP" subscribing to mux "479MHz", weight: 10, adapter: "TurboSight TBS 6205 DVB-T/T2/C #2 : DVB-T #0", network: "Nacionales", service: "Raw PID Subscription", hostname="10.0.108.253", client="VLC/3.0.8 LibVLC/3.0.8"
2019-12-29 14:14:30.834 http: 10.0.108.253: using ticket 622ED60E46D567CE3359BB7E1B610FC28F4DF7F9 for /stream/mux/8ac12b36df0d5d88df5754cdd64028e7
2019-12-29 14:14:30.838 subscription: 17E1: "HTTP" subscribing to mux "479MHz", weight: 10, adapter: "TurboSight TBS 6205 DVB-T/T2/C #2 : DVB-T #0", network: "Nacionales", service: "Raw PID Subscription", hostname="10.0.108.253", client="VLC/3.0.8 LibVLC/3.0.8"
2019-12-29 14:14:31.301 subscription: 17E0: "HTTP" unsubscribing, hostname="10.0.108.253", client="VLC/3.0.8 LibVLC/3.0.8"
2019-12-29 14:14:33.083 mpegts: 479MHz in Nacionales - scan no data, failed
2019-12-29 14:14:37.444 subscription: 17E1: service instance is bad, reason: No input detected

#2

Updated by saen acro 23 days ago

Is femon report it?

#3

Updated by Castor 007 23 days ago

Castor 007 wrote:

Tvheadend does not deliver SNR on several frequencies in DVB-T2 Colombia, I do not understand why
Already change version of linux, 16.04, 18.04 install tvheadend again and the problem persists ... I expose photos and logs

You can give me command for get result ?

saen acro wrote:

Is femon report it?

#4

Updated by Castor 007 23 days ago

saen acro wrote:

Is femon report it?

can you send me the command to use and send you the results
Thank you

#5

Updated by Castor 007 23 days ago

saen acro wrote:

Is femon report it?

[email protected]:~# femon -H
FE: TurboSight TBS 6205 DVB-T/T2/C (DVBT)
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 23% | snr 0% | ber 1 | unc 0 |
status | signal 23% | snr 0% | ber 1 | unc 0 |
status | signal 10% | snr 0% | ber 1 | unc 0 |
status | signal 10% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 22% | snr 0% | ber 1 | unc 0 |
status | signal 22% | snr 0% | ber 1 | unc 0 |
status | signal 9% | snr 0% | ber 1 | unc 0 |
status | signal 9% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 6% | snr 0% | ber 1 | unc 0 |
status | signal 5% | snr 0% | ber 1 | unc 0 |
status SC | signal 5% | snr 0% | ber 1 | unc 0 |
status SC | signal 78% | snr 0% | ber 1 | unc 0 |
status SC | signal 78% | snr 0% | ber 1 | unc 0 |
status SC | signal 78% | snr 0% | ber 1 | unc 0 |
status SC | signal 78% | snr 0% | ber 1 | unc 0 |
status | signal 78% | snr 0% | ber 1 | unc 0 |
status | signal 78% | snr 0% | ber 1 | unc 0 |
status | signal 78% | snr 0% | ber 1 | unc 0 |
status SC | signal 78% | snr 0% | ber 1 | unc 0 |
status SC | signal 78% | snr 0% | ber 1 | unc 0 |
status SC | signal 78% | snr 0% | ber 1 | unc 0 |
status SC | signal 78% | snr 0% | ber 1 | unc 0 |
status SC | signal 78% | snr 0% | ber 1 | unc 0 |
status SC | signal 79% | snr 0% | ber 1 | unc 0 |

#6

Updated by saen acro 23 days ago

Another try with

dvb-fe-tool -A -a 2 -f 0

else driver is not good.

#7

Updated by Castor 007 22 days ago

saen acro wrote:

Another try with
[...]
else driver is not good.

[email protected]:~# dvb-fe-tool -A -a 2 -f 0
Lock (0x1f) Signal= -55.00dBm C/N= 27.00dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 990x10^-9
Lock (0x1f) Signal= -54.00dBm C/N= 26.00dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 990x10^-9
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -55.00dBm C/N= 25.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -55.00dBm C/N= 24.50dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 25.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 990x10^-9
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 1.90x10^-6
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -55.00dBm C/N= 26.25dB UCB= 13816 postBER= 990x10^-9
Lock (0x1f) Signal= -55.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.00dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.25dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 0
Lock (0x1f) Signal= -54.00dBm C/N= 26.75dB UCB= 13816 postBER= 0

Any other suggestions ?
Thank

#8

Updated by Castor 007 22 days ago

saen acro wrote:

Another try with
[...]
else driver is not good.

[email protected]:~# dvb-fe-tool -A -a 2 -f 0
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -22.00dBm
Carrier(0x03) Signal= -22.00dBm
Carrier(0x03) Signal= -22.00dBm
Carrier(0x03) Signal= -22.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
(0x00) Signal= -21.00dBm
(0x00) Signal= -21.00dBm
(0x00) Signal= -20.00dBm
Carrier(0x03) Signal= -20.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm
(0x00) Signal= -21.00dBm
(0x00) Signal= -21.00dBm
(0x00) Signal= -21.00dBm
Carrier(0x03) Signal= -20.00dBm
Carrier(0x03) Signal= -20.00dBm
Carrier(0x03) Signal= -22.00dBm
Carrier(0x03) Signal= -22.00dBm
Carrier(0x03) Signal= -21.00dBm
Carrier(0x03) Signal= -21.00dBm

#9

Updated by Flole Systems 22 days ago

Use 4.3 aka latest master with the new signal level readout functionality.

#10

Updated by saen acro 22 days ago

Be more informative what is signal type etc.

-a X

is adapter
-f

is frontend

all adapters and frontends can be seen with

tree /dev/dvb

#11

Updated by Castor 007 22 days ago

saen acro wrote:

Be more informative what is signal type etc.
[...]

What Command ????
[email protected]:~# dvb-fe-tool -a X
Device TurboSight TBS 6205 DVB-T/T2/C (/dev/dvb/adapter0/frontend0) capabilities:
CAN_2G_MODULATION
CAN_FEC_1_2
CAN_FEC_2_3
CAN_FEC_3_4
CAN_FEC_5_6
CAN_FEC_7_8
CAN_FEC_AUTO
CAN_GUARD_INTERVAL_AUTO
CAN_HIERARCHY_AUTO
CAN_INVERSION_AUTO
CAN_MULTISTREAM
CAN_MUTE_TS
CAN_QAM_16
CAN_QAM_32
CAN_QAM_64
CAN_QAM_128
CAN_QAM_256
CAN_QAM_AUTO
CAN_QPSK
CAN_TRANSMISSION_MODE_AUTO
DVB API Version 5.11, Current v5 delivery system: DVBT2
Supported delivery systems:
DVBT
[DVBT2]
DVBC/ANNEX_A
DVBC/ANNEX_B

is adapter
[...]

What Commnad ????

[email protected]:~# dvb-fe-tool --f
dvb-fe-tool: la opción '--f' es ambigua; posibilidades: '--frontend' '--femon'
Try `dvb-fe-tool --help' or `dvb-fe-tool --usage' for more information.
Device TurboSight TBS 6205 DVB-T/T2/C (/dev/dvb/adapter0/frontend0) capabilities:
CAN_2G_MODULATION
CAN_FEC_1_2
CAN_FEC_2_3
CAN_FEC_3_4
CAN_FEC_5_6
CAN_FEC_7_8
CAN_FEC_AUTO
CAN_GUARD_INTERVAL_AUTO
CAN_HIERARCHY_AUTO
CAN_INVERSION_AUTO
CAN_MULTISTREAM
CAN_MUTE_TS
CAN_QAM_16
CAN_QAM_32
CAN_QAM_64
CAN_QAM_128
CAN_QAM_256
CAN_QAM_AUTO
CAN_QPSK
CAN_TRANSMISSION_MODE_AUTO
DVB API Version 5.11, Current v5 delivery system: DVBT2
Supported delivery systems:
DVBT
[DVBT2]
DVBC/ANNEX_A
DVBC/ANNEX_B
[email protected]:~#

is frontend
all adapters and frontends can be seen with
[...]

/dev/dvb
├── adapter0
│   ├── demux0
│   ├── dvr0
│   ├── frontend0
│   └── net0
├── adapter1
│   ├── demux0
│   ├── dvr0
│   ├── frontend0
│   └── net0
├── adapter2
│   ├── demux0
│   ├── dvr0
│   ├── frontend0
│   └── net0
└── adapter3
├── demux0
├── dvr0
├── frontend0
└── net0

#12

Updated by Castor 007 22 days ago

saen acro wrote:

Be more informative what is signal type etc.
[...]
is adapter
[...]

[email protected]:~# femon a X
FE: TurboSight TBS 6205 DVB-T/T2/C (DVBT)
status SCVYL | signal c550 | snr bc58 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr b738 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr b738 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr aa68 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr 8e38 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr c408 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr a400 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr b0d0 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr b9c8 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status | signal c550 | snr 0000 | ber 00000001 | unc 00000000 |
status SCVYL | signal c550 | snr b9c8 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr bb10 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr c178 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr ae40 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr 9730 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr c550 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr 8168 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr 9ee0 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr b9c8 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal c550 | snr b0d0 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
^C
[email protected]:~# ^C
[email protected]:~# femon -f
femon: option requires an argument -
'f'

usage: femon [options]
-H : human readable output
-A : Acoustical mode. A sound indicates the signal quality.
-r : If 'Acoustical mode' is active it tells the application
is called remotely via ssh. The sound is heard on the 'real'
machine but. The user has to be root.
-a number : use given adapter (default 0)
-f number : use given frontend (default 0)
-c number : samples to take (default 0 = infinite)

[email protected]:~# femon -a X
FE: TurboSight TBS 6205 DVB-T/T2/C (DVBT)
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 30b0 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 30b0 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 1710 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 1710 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
^C
[email protected]:~# ^C
[email protected]:~# femon -a X
FE: TurboSight TBS 6205 DVB-T/T2/C (DVBT)
status | signal 2670 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 11f0 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 11f0 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 11f0 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 11f0 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 3860 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 3860 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 19a0 | snr 0000 | ber 00000001 | unc 00000000 |
^C
[email protected]:~# femon -a X
FE: TurboSight TBS 6205 DVB-T/T2/C (DVBT)
status | signal 0cd0 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0cd0 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 1480 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 1480 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 2b90 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 2b90 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 1480 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 1480 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
status | signal 0f60 | snr 0000 | ber 00000001 | unc 00000000 |
^C

[email protected]:~#

is frontend

all adapters and frontends can be seen with
[...]

#13

Updated by saen acro 22 days ago

dvb-fe-tool -a X

in your case
X= 0|1|2|3

so what is parameters of muxes without SNR

#14

Updated by Castor 007 22 days ago

saen acro wrote:

[...]

in your case
X= 0|1|2|3

so what is parameters of muxes without SNR

[email protected]:~# dvb-fe-tool -a X
Device TurboSight TBS 6205 DVB-T/T2/C (/dev/dvb/adapter0/frontend0) capabilities:
CAN_2G_MODULATION
CAN_FEC_1_2
CAN_FEC_2_3
CAN_FEC_3_4
CAN_FEC_5_6
CAN_FEC_7_8
CAN_FEC_AUTO
CAN_GUARD_INTERVAL_AUTO
CAN_HIERARCHY_AUTO
CAN_INVERSION_AUTO
CAN_MULTISTREAM
CAN_MUTE_TS
CAN_QAM_16
CAN_QAM_32
CAN_QAM_64
CAN_QAM_128
CAN_QAM_256
CAN_QAM_AUTO
CAN_QPSK
CAN_TRANSMISSION_MODE_AUTO
DVB API Version 5.11, Current v5 delivery system: DVBT2
Supported delivery systems:
DVBT
[DVBT2]
DVBC/ANNEX_A
DVBC/ANNEX_B
[email protected]:~#

#15

Updated by Castor 007 22 days ago

so what is parameters of muxes without SNR

[CHANNEL]
DELIVERY_SYSTEM = DVBT2 -- SNR OK - but only 1 service SD - Total 1 SD + 4 HD
FREQUENCY = 473000000
BANDWIDTH_HZ = 6000000

[CHANNEL]
DELIVERY_SYSTEM = DVBT2 -- * Not have SNR - Total Service 6 HD*
FREQUENCY = 479000000
BANDWIDTH_HZ = 6000000

[CHANNEL]
DELIVERY_SYSTEM = DVBT2 -- SNR OK I have all Services
FREQUENCY = 485000000
BANDWIDTH_HZ = 6000000

[CHANNEL]
DELIVERY_SYSTEM = DVBT2 - SNR OK
FREQUENCY = 491000000
BANDWIDTH_HZ = 6000000

[CHANNEL]
DELIVERY_SYSTEM = DVBT2 - Not Have SNR
FREQUENCY = 551000000
BANDWIDTH_HZ = 6000000

[CHANNEL]
DELIVERY_SYSTEM = DVBT2 - not Have SNR
FREQUENCY = 557000000
BANDWIDTH_HZ = 6000000

I windows 7 Found good all Channels with VLC Players

#16

Updated by saen acro 22 days ago

Transmission mode: ?
Guard Interval: ?
Constellation: ?

#17

Updated by Castor 007 22 days ago

saen acro wrote:

Transmission mode: ?
Guard Interval: ?
Constellation: ?

that is info I have for all frequency only change frequency

#18

Updated by saen acro 22 days ago

try this

service tvheadend stop

then scan with
w_scan -f t -x

/it will take ~15 min/

on final will be table with all frequency with parameters

/I guess this NONE if replaced by AUTO also wil be result./

Then you can start tvheadend again.

U se PRE button to format your post's

#19

Updated by Castor 007 22 days ago

saen acro wrote:

try this

[...]
then scan with
[...]
/it will take ~15 min/

on final will be table with all frequency with parameters

/I guess this NONE if replaced by AUTO also wil be result./

Then you can start tvheadend again.

U se PRE button to format your post's

[email protected]:~# w_scan -f t
w_scan -f t
w_scan version 20141122 (compiled for DVB API 5.10)
guessing country 'US', use -c <country> to override
using settings for UNITED STATES
ATSC
VSB US/CA, DVB-T TW
scan type TERRCABLE_ATSC, channellist 1
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> "TurboSight TBS 6205 DVB-T/T2/C " doesnt support TERRCABLE_ATSC -> SEARCH NEXT ONE.
/dev/dvb/adapter1/frontend0 -> "TurboSight TBS 6205 DVB-T/T2/C " doesnt support TERRCABLE_ATSC -> SEARCH NEXT ONE.
/dev/dvb/adapter2/frontend0 -> "TurboSight TBS 6205 DVB-T/T2/C " doesnt support TERRCABLE_ATSC -> SEARCH NEXT ONE.
/dev/dvb/adapter3/frontend0 -> "TurboSight TBS 6205 DVB-T/T2/C " doesnt support TERRCABLE_ATSC -> SEARCH NEXT ONE.
main:3904: FATAL: * NO USEABLE TERRCABLE_ATSC CARD FOUND. *
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.

#20

Updated by Castor 007 22 days ago

Castor 007 wrote:

saen acro wrote:

try this

[...]
then scan with
[...]
/it will take ~15 min/

on final will be table with all frequency with parameters

/I guess this NONE if replaced by AUTO also wil be result./

Then you can start tvheadend again.

U se PRE button to format your post's

[email protected]:~# w_scan -f t -x
w_scan -f t -x
w_scan version 20141122 (compiled for DVB API 5.10)
guessing country 'US', use -c <country> to override
using settings for UNITED STATES
ATSC
VSB US/CA, DVB-T TW
scan type TERRCABLE_ATSC, channellist 1
output format initial tuning data
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> "TurboSight TBS 6205 DVB-T/T2/C " doesnt support TERRCABLE_ATSC -> SEARCH NEXT ONE.
/dev/dvb/adapter1/frontend0 -> "TurboSight TBS 6205 DVB-T/T2/C " doesnt support TERRCABLE_ATSC -> SEARCH NEXT ONE.
/dev/dvb/adapter2/frontend0 -> "TurboSight TBS 6205 DVB-T/T2/C " doesnt support TERRCABLE_ATSC -> SEARCH NEXT ONE.
/dev/dvb/adapter3/frontend0 -> "TurboSight TBS 6205 DVB-T/T2/C " doesnt support TERRCABLE_ATSC -> SEARCH NEXT ONE.
main:3904: FATAL: * NO USEABLE TERRCABLE_ATSC CARD FOUND. *
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
[email protected]:~#

#21

Updated by saen acro 22 days ago

fix your localization.

and use PRE to format your posts.

guessing country 'US', use -c <country> to override

be more critical to your knowledge.

#22

Updated by Castor 007 22 days ago

saen acro wrote:

fix your localization.

and use PRE to format your posts.

[...]

be more critical to your knowledge.

Colombia DVB-T2 Found with 6Mhz .. W_Scan Work scan with 7Mhz, 8Mhz
look

[email protected]:/# w_scan ft -X -c CO
w_scan -ft -X -c CO
w_scan version 20141122 (compiled for DVB API 5.10)
using settings for COLOMBIA
Country identifier CO not defined. Using defaults.
scan type TERRESTRIAL, channellist 4
output format czap/tzap/szap/xine
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "TurboSight TBS 6205 DVB-T/T2/C ": very good :
))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.11
frontend 'TurboSight TBS 6205 DVB-T/T2/C ' supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (48.00MHz ... 870.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T...
Scanning 7MHz frequencies...
177500: (time: 00:04.199)
184500: (time: 00:06.227)
191500: (time: 00:08.259)
198500: (time: 00:10.287)
205500: (time: 00:12.319)
212500: (time: 00:14.351)
219500: (time: 00:16.379)
226500: (time: 00:18.411)
Scanning 8MHz frequencies...
474000: (time: 00:20.439)
482000: (time: 00:22.467)
490000: (time: 00:24.495)
498000: (time: 00:26.527)
506000: (time: 00:28.559)
514000: (time: 00:30.591)
522000: (time: 00:32.615)
530000: (time: 00:34.643)
538000: (time: 00:36.671)
546000: (time: 00:38.699)
554000: (time: 00:40.727)
562000: (time: 00:42.759)
570000: (time: 00:44.787)
578000: (time: 00:46.815)
586000: (time: 00:48.843)
594000: (time: 00:50.871)
602000: (time: 00:52.899)
610000: (time: 00:54.927)
618000: (time: 00:56.955)
626000: (time: 00:58.983)
634000: (time: 01:01.011)
642000: (time: 01:03.039)
650000: (time: 01:05.067)
658000: (time: 01:07.099)
666000: (time: 01:09.123)
674000: (time: 01:11.151)
682000: (time: 01:13.179)
690000: (time: 01:15.207)
698000: (time: 01:17.243)
706000: (time: 01:19.271)
714000: (time: 01:21.303)
722000: (time: 01:23.331)
730000: (time: 01:25.359)
738000: (time: 01:27.391)
746000: (time: 01:29.419)
754000: (time: 01:31.447)
762000: (time: 01:33.475)
770000: (time: 01:35.503)
778000: (time: 01:37.531)
786000: (time: 01:39.559)
794000: (time: 01:41.595)
802000: (time: 01:43.627)
810000: (time: 01:45.655)
818000: (time: 01:47.683)
826000: (time: 01:49.711)
834000: (time: 01:51.739)
842000: (time: 01:53.775)
850000: (time: 01:55.811)
858000: (time: 01:57.839)
Scanning DVB-T2...
Scanning 7MHz frequencies...
177500: (time: 01:59.867)
184500: (time: 02:01.899)
191500: (time: 02:03.927)
198500: (time: 02:05.959)
205500: (time: 02:07.991)
212500: (time: 02:10.023)
219500: (time: 02:12.055)
226500: (time: 02:14.087)
Scanning 8MHz frequencies...
474000: (time: 02:16.115)
482000: (time: 02:18.147)
490000: (time: 02:20.179)
498000: (time: 02:22.211)
506000: (time: 02:24.243)
514000: (time: 02:26.271)
522000: (time: 02:28.303)
530000: (time: 02:30.335)
538000: (time: 02:32.367)
546000: (time: 02:34.399)
554000: (time: 02:36.431)
562000: (time: 02:38.463)
570000: (time: 02:40.495)
578000: (time: 02:42.531)
586000: (time: 02:44.563)
594000: (time: 02:46.591)
602000: (time: 02:48.627)
610000: (time: 02:50.659)
618000: (time: 02:52.691)
626000: (time: 02:54.723)
634000: (time: 02:56.755)
642000: (time: 02:58.791)
650000: (time: 03:00.823)
658000: (time: 03:02.855)
666000: (time: 03:04.887)
674000: (time: 03:06.915)
682000: (time: 03:08.951)
690000: (time: 03:10.983)
698000: (time: 03:13.019)
706000: (time: 03:15.055)
714000: (time: 03:17.095)
722000: (time: 03:19.119)
730000: (time: 03:21.155)
738000: (time: 03:23.183)
746000: (time: 03:25.219)
754000: (time: 03:27.251)
762000: (time: 03:29.283)
770000: (time: 03:31.319)
778000: (time: 03:33.351)
786000: (time: 03:35.387)
794000: (time: 03:37.419)
802000: (time: 03:39.451)
810000: (time: 03:41.483)
818000: (time: 03:43.519)
826000: (time: 03:45.555)
834000: (time: 03:47.587)
842000: (time: 03:49.619)
850000: (time: 03:51.651)
858000: (time: 03:53.687)

ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!
[email protected]:/#

#23

Updated by saen acro 22 days ago

If not stopped tvheadend will not work.

Also your version of w-scan is old (2014-11-22) and there is no Colombia 6mhz case
buld this
https://github.com/tbsdtv/w_scan

Again use pre botton to format your posts

see example below

Castor 007 wrote:

 [email protected]:/# w_scan -ft -X -c CO
 w_scan -ft -X -c CO
 w_scan version 20141122 (compiled for DVB API 5.10)
 using settings for COLOMBIA
 Country identifier CO not defined. Using defaults.
 scan type TERRESTRIAL, channellist 4
 output format czap/tzap/szap/xine
 output charset 'UTF-8', use -C <charset> to override
 Info: using DVB adapter auto detection.
         /dev/dvb/adapter0/frontend0 -> TERRESTRIAL "TurboSight TBS 6205 DVB-T/T2/C ": very good :-))

 Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
 -_-_-_-_ Getting frontend capabilities-_-_-_-_
 Using DVB API 5.11
 frontend 'TurboSight TBS 6205 DVB-T/T2/C ' supports
 DVB-T2
 INVERSION_AUTO
 QAM_AUTO
 TRANSMISSION_MODE_AUTO
 GUARD_INTERVAL_AUTO
 HIERARCHY_AUTO
 FEC_AUTO
 FREQ (48.00MHz ... 870.00MHz)
 -_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
 Scanning DVB-T...
 Scanning 7MHz frequencies...
 177500: (time: 00:04.199)
 184500: (time: 00:06.227)
 191500: (time: 00:08.259)
 198500: (time: 00:10.287)
 205500: (time: 00:12.319)
 212500: (time: 00:14.351)
 219500: (time: 00:16.379)
 226500: (time: 00:18.411)
 Scanning 8MHz frequencies...
 474000: (time: 00:20.439)
 482000: (time: 00:22.467)
 490000: (time: 00:24.495)
 498000: (time: 00:26.527)
 506000: (time: 00:28.559)
 514000: (time: 00:30.591)
 522000: (time: 00:32.615)
 530000: (time: 00:34.643)
 538000: (time: 00:36.671)
 546000: (time: 00:38.699)
 554000: (time: 00:40.727)
 562000: (time: 00:42.759)
 570000: (time: 00:44.787)
 578000: (time: 00:46.815)
 586000: (time: 00:48.843)
 594000: (time: 00:50.871)
 602000: (time: 00:52.899)
 610000: (time: 00:54.927)
 618000: (time: 00:56.955)
 626000: (time: 00:58.983)
 634000: (time: 01:01.011)
 642000: (time: 01:03.039)
 650000: (time: 01:05.067)
 658000: (time: 01:07.099)
 666000: (time: 01:09.123)
 674000: (time: 01:11.151)
 682000: (time: 01:13.179)
 690000: (time: 01:15.207)
 698000: (time: 01:17.243)
 706000: (time: 01:19.271)
 714000: (time: 01:21.303)
 722000: (time: 01:23.331)
 730000: (time: 01:25.359)
 738000: (time: 01:27.391)
 746000: (time: 01:29.419)
 754000: (time: 01:31.447)
 762000: (time: 01:33.475)
 770000: (time: 01:35.503)
 778000: (time: 01:37.531)
 786000: (time: 01:39.559)
 794000: (time: 01:41.595)
 802000: (time: 01:43.627)
 810000: (time: 01:45.655)
 818000: (time: 01:47.683)
 826000: (time: 01:49.711)
 834000: (time: 01:51.739)
 842000: (time: 01:53.775)
 850000: (time: 01:55.811)
 858000: (time: 01:57.839)
 Scanning DVB-T2...
 Scanning 7MHz frequencies...
 177500: (time: 01:59.867)
 184500: (time: 02:01.899)
 191500: (time: 02:03.927)
 198500: (time: 02:05.959)
 205500: (time: 02:07.991)
 212500: (time: 02:10.023)
 219500: (time: 02:12.055)
 226500: (time: 02:14.087)
 Scanning 8MHz frequencies...
 474000: (time: 02:16.115)
 482000: (time: 02:18.147)
 490000: (time: 02:20.179)
 498000: (time: 02:22.211)
 506000: (time: 02:24.243)
 514000: (time: 02:26.271)
 522000: (time: 02:28.303)
 530000: (time: 02:30.335)
 538000: (time: 02:32.367)
 546000: (time: 02:34.399)
 554000: (time: 02:36.431)
 562000: (time: 02:38.463)
 570000: (time: 02:40.495)
 578000: (time: 02:42.531)
 586000: (time: 02:44.563)
 594000: (time: 02:46.591)
 602000: (time: 02:48.627)
 610000: (time: 02:50.659)
 618000: (time: 02:52.691)
 626000: (time: 02:54.723)
 634000: (time: 02:56.755)
 642000: (time: 02:58.791)
 650000: (time: 03:00.823)
 658000: (time: 03:02.855)
 666000: (time: 03:04.887)
 674000: (time: 03:06.915)
 682000: (time: 03:08.951)
 690000: (time: 03:10.983)
 698000: (time: 03:13.019)
 706000: (time: 03:15.055)
 714000: (time: 03:17.095)
 722000: (time: 03:19.119)
 730000: (time: 03:21.155)
 738000: (time: 03:23.183)
 746000: (time: 03:25.219)
 754000: (time: 03:27.251)
 762000: (time: 03:29.283)
 770000: (time: 03:31.319)
 778000: (time: 03:33.351)
 786000: (time: 03:35.387)
 794000: (time: 03:37.419)
 802000: (time: 03:39.451)
 810000: (time: 03:41.483)
 818000: (time: 03:43.519)
 826000: (time: 03:45.555)
 834000: (time: 03:47.587)
 842000: (time: 03:49.619)
 850000: (time: 03:51.651)
 858000: (time: 03:53.687)

 ERROR: Sorry - i couldn't get any working frequency/transponder
  Nothing to scan!!
 [email protected]:/#
#24

Updated by Castor 007 21 days ago

saen acro wrote:

If not stopped tvheadend will not work.

Also your version of w-scan is old (2014-11-22) and there is no Colombia 6mhz case
buld this
https://github.com/tbsdtv/w_scan

Again use pre botton to format your posts

see example below

Castor 007 wrote:

[...]

channels.conf

saen acro wrote:

If not stopped tvheadend will not work.

Also your version of w-scan is old (2014-11-22) and there is no Colombia 6mhz case
buld this
https://github.com/tbsdtv/w_scan

Again use pre botton to format your posts

see example below

Castor 007 wrote:

[...]

saen acro wrote:

If not stopped tvheadend will not work.

Also your version of w-scan is old (2014-11-22) and there is no Colombia 6mhz case
buld this
https://github.com/tbsdtv/w_scan

Again use pre botton to format your posts

see example below

Castor 007 wrote:

[...]

[email protected]:/usr/local/bin# ./w_scan c CO
./w_scan -c CO
w_scan version 20170107 (compiled for DVB API 5.10)
using settings for COLOMBIA
DVB aerial
DVB-T2 CO
scan type TERRESTRIAL, channellist 13
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "TurboSight TBS 6205 DVB-T/T2/C ": very good :
))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.11
frontend 'TurboSight TBS 6205 DVB-T/T2/C ' supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (48.00MHz ... 870.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T2...
Scanning 6MHz frequencies...
473000: (time: 00:04.239) signal ok: QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: > (0:0:20)
QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:0:20) : updating network_id -> (0:12290:20)
updating transponder:
(QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:12290:20)) 0x0000
to (QAM_64 f = 473000 kHz I999B6C34D0T8G8Y0 (8362:12290:20)) 0x405A
new transponder: (QPSK f = 0 kHz I0B999C0D0T2G32Y0 (8362:12290:21)) 0x4000
479000: (time: 00:05.947) signal ok: QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:10)
QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:0:10) : updating network_id -> (0:12289:10)
updating transponder:
(QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:12289:10)) 0x0000
to (QAM_16 f = 479000 kHz I999B6C34D0T8G8Y0 (12289:12289:10)) 0x405A
new transponder: (QPSK f = 0 kHz I999B6C12D0T2G4Y0 (12289:12289:11)) 0x405A
new transponder: (QPSK f = 0 kHz I0B999C0D0T2G32Y0 (12289:12289:1)) 0x4000
485000: (time: 00:11.059)
491000: (time: 00:15.399)
497000: (time: 00:19.851)
503000: (time: 00:21.883)
509000: (time: 00:23.911)
515000: (time: 00:25.947)
521000: (time: 00:27.975)
527000: (time: 00:30.011)
533000: (time: 00:32.039)
539000: (time: 00:34.075)
545000: (time: 00:36.103)
551000: (time: 00:38.139)
557000: (time: 00:40.167)
563000: (time: 00:42.203)
569000: (time: 00:44.235)
575000: (time: 00:46.271)
581000: (time: 00:48.299)
587000: (time: 00:52.695)
593000: (time: 00:54.727)
599000: (time: 00:59.127)
605000: (time: 01:01.159)
611000: (time: 01:03.191)
617000: (time: 01:05.219)
623000: (time: 01:07.259)
629000: (time: 01:09.291)
635000: (time: 01:11.327)
641000: (time: 01:13.359)
647000: (time: 01:15.391)
653000: (time: 01:17.423)
659000: (time: 01:19.459)
665000: (time: 01:21.487)
671000: (time: 01:23.515)
677000: (time: 01:25.543)
683000: (time: 01:27.583)
689000: (time: 01:29.619)
695000: (time: 01:31.655)
tune to: QAM_64 f = 473000 kHz I999B6C34D0T8G8Y0 (8362:12290:20) (time: 01:33.691)
----------no signal---------

tune to: QAM_AUTO f = 473000 kHz I999B6C999D0T999G999Y0 (8362:12290:20) (time: 01:39.747) (no signal)
----------no signal----------
tune to: QAM_16 f = 479000 kHz I999B6C34D0T8G8Y0 (12289:12289:10) (time: 01:45.811)
----------no signal----------
tune to: QAM_AUTO f = 479000 kHz I999B6C999D0T999G999Y0 (12289:12289:10) (time: 01:51.867) (no signal)
----------no signal----------

ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!
[email protected]:/usr/local/bin#

485000: (time: 00:11.059) -- I have signal in TVH
491000: (time: 00:15.399) -- I have signal in TVH

551000: (time: 00:38.139) -- Signal very very low in TVH
557000: (time: 00:40.167) -- signal very very low in TVH !!

#25

Updated by Castor 007 21 days ago

saen acro wrote:

If not stopped tvheadend will not work.

Also your version of w-scan is old (2014-11-22) and there is no Colombia 6mhz case
buld this
https://github.com/tbsdtv/w_scan

Again use pre botton to format your posts

NEW CAN

./w_scan c CO
w_scan version 20170107 (compiled for DVB API 5.10)
using settings for COLOMBIA
DVB aerial
DVB-T2 CO
scan type TERRESTRIAL, channellist 13
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "TurboSight TBS 6205 DVB-T/T2/C ": very good :
))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.11
frontend 'TurboSight TBS 6205 DVB-T/T2/C ' supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (48.00MHz ... 870.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T2...
Scanning 6MHz frequencies...
473000: (time: 00:04.175) signal ok: QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: > (0:0:20)
QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:0:20) : updating network_id -> (0:12290:20)
updating transponder:
(QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:12290:20)) 0x0000
to (QAM_64 f = 473000 kHz I999B6C34D0T8G8Y0 (8362:12290:20)) 0x405A
new transponder: (QPSK f = 0 kHz I0B999C0D0T2G32Y0 (8362:12290:21)) 0x4000
479000: (time: 00:05.087) signal ok: QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:10)
QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:0:10) : updating network_id -> (0:12289:10)
updating transponder:
(QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:12289:10)) 0x0000
to (QAM_16 f = 479000 kHz I999B6C34D0T8G8Y0 (12289:12289:10)) 0x405A
new transponder: (QPSK f = 0 kHz I999B6C12D0T2G4Y0 (12289:12289:11)) 0x405A
new transponder: (QPSK f = 0 kHz I0B999C0D0T2G32Y0 (12289:12289:1)) 0x4000
485000: (time: 00:09.971)
491000: (time: 00:14.415)
497000: (time: 00:18.859)
503000: (time: 00:20.891)
509000: (time: 00:22.923)
515000: (time: 00:24.955)
521000: (time: 00:26.987)
527000: (time: 00:29.019)
533000: (time: 00:31.051)
539000: (time: 00:33.083)
545000: (time: 00:35.115)
551000: (time: 00:37.147)
557000: (time: 00:39.179)
563000: (time: 00:41.211)
569000: (time: 00:43.243)
575000: (time: 00:45.271)
581000: (time: 00:47.299) signal ok: QAM_AUTO f = 581000 kHz I999B6C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 581000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:10)
QAM_AUTO f = 581000 kHz I999B6C999D999T999G999Y999P0 (0:0:10) : updating network_id -> (0:12289:10)
587000: (time: 00:49.999)
593000: (time: 00:52.031) signal ok: QAM_AUTO f = 593000 kHz I999B6C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 593000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:20)
QAM_AUTO f = 593000 kHz I999B6C999D999T999G999Y999P0 (0:0:20) : updating network_id -> (0:12290:20)
599000: (time: 00:53.123)
605000: (time: 00:55.151)
611000: (time: 00:57.179)
617000: (time: 00:59.207)
623000: (time: 01:01.239)
629000: (time: 01:03.267)
635000: (time: 01:05.295)
641000: (time: 01:07.323)
647000: (time: 01:09.351)
653000: (time: 01:11.379)
659000: (time: 01:13.407)
665000: (time: 01:15.439)
671000: (time: 01:17.479)
677000: (time: 01:19.515)
683000: (time: 01:21.551)
689000: (time: 01:23.583)
695000: (time: 01:25.623)
tune to: QAM_64 f = 473000 kHz I999B6C34D0T8G8Y0 (8362:12290:20) (time: 01:27.655)
----------no signal---------

tune to: QAM_AUTO f = 473000 kHz I999B6C999D0T999G999Y0 (8362:12290:20) (time: 01:33.707) (no signal)
----------no signal----------
tune to: QAM_16 f = 479000 kHz I999B6C34D0T8G8Y0 (12289:12289:10) (time: 01:39.759)
----------no signal----------
tune to: QAM_AUTO f = 479000 kHz I999B6C999D0T999G999Y0 (12289:12289:10) (time: 01:45.811) (no signal)
----------no signal----------
tune to: QAM_AUTO f = 581000 kHz I999B6C999D999T999G999Y999P0 (0:12289:10) (time: 01:51.867)
service = RCN HD (RCNTV)
service = RCN HD 2 (RCN TELEVISION)
service = NTN 24 (RCN TELEVISION)
service = RCN LA RADIO (RCN TELEVISION)
service = LA FM RADIO (RCN TELEVISION)
service = RCN RADIO UNO (RCN TELEVISION)
updating transponder:
(QAM_AUTO f = 479000 kHz I999B6C999D0T999G999Y0 (12289:12289:10)) 0x0000
to (QAM_16 f = 479000 kHz I999B6C34D0T8G8Y0 (12289:12289:10)) 0x405A
tune to: QAM_AUTO f = 593000 kHz I999B6C999D999T999G999Y999P0 (0:12290:20) (time: 02:05.735)
service = CARACOL TV HD (CARACOL TELEVISION SA)
service = CARACOL HD 2 (CARACOL TELEVISION SA)
service = BLU Radio (CARACOL TELEVISION SA)
service = LA KALLE (CARACOL TELEVISION SA)
updating transponder:
(QAM_AUTO f = 473000 kHz I999B6C999D0T999G999Y0 (8362:12290:20)) 0x0000
to (QAM_64 f = 473000 kHz I999B6C34D0T8G8Y0 (8362:12290:20)) 0x405A
(time: 02:19.751) dumping lists (10 services)
..
RCN HD;RCNTV:581000:B6S1P0:T:27500:101=27:[email protected],103=eng:0;1024:0:2:0:10:0
RCN HD 2;RCN TELEVISION:581000:B6S1P0:T:27500:301=27:[email protected]:0:0:3:0:10:0
NTN 24;RCN TELEVISION:581000:B6S1P0:T:27500:701=27:[email protected]:0:0:4:0:10:0
RCN LA RADIO;RCN TELEVISION:581000:B6S1P0:T:27500:0:[email protected]:0:0:5:0:10:0
LA FM RADIO;RCN TELEVISION:581000:B6S1P0:T:27500:0:[email protected]:0:0:6:0:10:0
RCN RADIO UNO;RCN TELEVISION:581000:B6S1P0:T:27500:0:[email protected]:0:0:7:0:10:0
CARACOL TV HD;CARACOL TELEVISION SA:593000:B6S1P0:T:27500:1001=27:[email protected];1003:0;1024:0:21:0:20:0
CARACOL HD 2;CARACOL TELEVISION SA:593000:B6S1P0:T:27500:1011=27:[email protected]:0;1025:0:22:0:20:0
BLU Radio;CARACOL TELEVISION SA:593000:B6S1P0:T:27500:0:[email protected]:0:0:24:0:20:0
LA KALLE;CARACOL TELEVISION SA:593000:B6S1P0:T:27500:1051=27:[email protected]:0:0:25:0:20:0
Done, scan time: 02:19.751

see example below

Castor 007 wrote:

[...]

#26

Updated by saen acro 21 days ago

Start using formating in your post's

use correct command
on second terminal can see femon status on another output of dvb-fe-tools

#27

Updated by Castor 007 21 days ago

saen acro wrote:

Start using formating in your post's

use correct command
on second terminal can see femon status on another output of dvb-fe-tools

Hi Saen
I can send anydesk for you can try please

anydesk: 117686208

#28

Updated by saen acro 21 days ago

It's simple just run

w_scan -f t -x -c CO

#29

Updated by Castor 007 21 days ago

saen acro wrote:

It's simple just run
[...]

[email protected]:~# w_scan f t -x -c CO
w_scan -f t -x -c CO
w_scan version 20170107 (compiled for DVB API 5.10)
using settings for COLOMBIA
DVB aerial
DVB-T2 CO
scan type TERRESTRIAL, channellist 13
output format initial tuning data
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "TurboSight TBS 6205 DVB-T/T2 /C ": very good :
))

Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.11
frontend 'TurboSight TBS 6205 DVB-T/T2/C ' supports
DVB-T2
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
BANDWIDTH_AUTO not supported, trying 6/7/8 MHz.
FREQ (48.00MHz ... 870.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning DVB-T2...
Scanning 6MHz frequencies...
473000: (time: 00:04.168) signal ok: QAM_AUTO f = 473000 kHz I999B6C9 99D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: > (0:0:20)
QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:0:20) : updating network_id -> (0:12290:20)
updating transponder:
(QAM_AUTO f = 473000 kHz I999B6C999D999T999G999Y999P0 (0:12290:20)) 0x0000
to (QAM_64 f = 473000 kHz I999B6C34D0T8G8Y0 (8362:12290:20)) 0x405A
new transponder: (QPSK f = 0 kHz I0B999C0D0T2G32Y0 (8362:12290:21)) 0x4000
479000: (time: 00:11.608) signal ok: QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:10)
QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:0:10) : updating network_id -> (0:12289:10)
updating transponder:
(QAM_AUTO f = 479000 kHz I999B6C999D999T999G999Y999P0 (0:12289:10)) 0x0000
to (QAM_16 f = 479000 kHz I999B6C34D0T8G8Y0 (12289:12289:10)) 0x405A
new transponder: (QPSK f = 0 kHz I999B6C12D0T2G4Y0 (12289:12289:11)) 0x405A
new transponder: (QPSK f = 0 kHz I0B999C0D0T2G32Y0 (12289:12289:1)) 0x4000
485000: (time: 00:16.548)
491000: (time: 00:20.832)
497000: (time: 00:25.276)
503000: (time: 00:27.308)
509000: (time: 00:29.340)
515000: (time: 00:31.372)
521000: (time: 00:33.408)
527000: (time: 00:35.444)
533000: (time: 00:37.484)
539000: (time: 00:39.520)
545000: (time: 00:41.556)
551000: (time: 00:43.584)
557000: (time: 00:45.620)
563000: (time: 00:47.652)
569000: (time: 00:49.685)
575000: (time: 00:51.717)
581000: (time: 00:53.745) signal ok: QAM_AUTO f = 581000 kHz I999B6C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 581000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:10)
QAM_AUTO f = 581000 kHz I999B6C999D999T999G999Y999P0 (0:0:10) : updating network_id -> (0:12289:10)
587000: (time: 00:56.553)
593000: (time: 00:58.593) signal ok: QAM_AUTO f = 593000 kHz I999B6C999D999T999G999Y999P0 (0:0:0)
QAM_AUTO f = 593000 kHz I999B6C999D999T999G999Y999P0 (0:0:0) : updating transport_stream_id: -> (0:0:20)
QAM_AUTO f = 593000 kHz I999B6C999D999T999G999Y999P0 (0:0:20) : updating network_id -> (0:12290:20)
599000: (time: 00:59.637)
605000: (time: 01:01.669)
611000: (time: 01:03.701)
617000: (time: 01:05.733)
623000: (time: 01:07.765)
629000: (time: 01:09.797)
635000: (time: 01:11.829)
641000: (time: 01:13.861)
647000: (time: 01:15.885)
653000: (time: 01:17.921)
659000: (time: 01:19.953)
665000: (time: 01:21.977)
671000: (time: 01:24.013)
677000: (time: 01:26.045)
683000: (time: 01:28.069)
689000: (time: 01:30.105)
695000: (time: 01:32.129)
tune to: QAM_64 f = 473000 kHz I999B6C34D0T8G8Y0 (8362:12290:20) (time: 01:34.161)
----------no signal---------

tune to: QAM_AUTO f = 473000 kHz I999B6C999D0T999G999Y0 (8362:12290:20) (time: 01:40.217) (no signal)
----------no signal----------
tune to: QAM_16 f = 479000 kHz I999B6C34D0T8G8Y0 (12289:12289:10) (time: 01:46.266)
----------no signal----------
tune to: QAM_AUTO f = 479000 kHz I999B6C999D0T999G999Y0 (12289:12289:10) (time: 01:52.326) (no signal)
----------no signal----------
tune to: QAM_AUTO f = 581000 kHz I999B6C999D999T999G999Y999P0 (0:12289:10) (time: 01:58.382)
service = RCN HD (RCNTV)
service = RCN HD 2 (RCN TELEVISION)
service = NTN 24 (RCN TELEVISION)
service = RCN LA RADIO (RCN TELEVISION)
service = LA FM RADIO (RCN TELEVISION)
service = RCN RADIO UNO (RCN TELEVISION)
updating transponder:
(QAM_AUTO f = 479000 kHz I999B6C999D0T999G999Y0 (12289:12289:10)) 0x0000
to (QAM_16 f = 479000 kHz I999B6C34D0T8G8Y0 (12289:12289:10)) 0x405A
tune to: QAM_AUTO f = 593000 kHz I999B6C999D999T999G999Y999P0 (0:12290:20) (time: 02:12.246)
service = CARACOL TV HD (CARACOL TELEVISION SA)
service = CARACOL HD 2 (CARACOL TELEVISION SA)
service = BLU Radio (CARACOL TELEVISION SA)
service = LA KALLE (CARACOL TELEVISION SA)
updating transponder:
(QAM_AUTO f = 473000 kHz I999B6C999D0T999G999Y0 (8362:12290:20)) 0x0000
to (QAM_64 f = 473000 kHz I999B6C34D0T8G8Y0 (8362:12290:20)) 0x405A
(time: 02:26.234) dumping lists (10 services)
..
#------------------------------------------------------------------------------
  1. file automatically generated by w_scan
  2. (http://wirbel.htpc-forum.de/w_scan/index2.html)
    #! <w_scan> 20170107 1 0 TERRESTRIAL CO </w_scan>
    #------------------------------------------------------------------------------
  3. location and provider: <add description here>
  4. date (yyyy-mm-dd) : 2019-12-31
  5. provided by (opt) : <your name or email here> #
  6. T2 <freq> <bw> <fec_hi> <fec_lo> <mod> <tm> <guard> <hi> [plp_id] [# comment]
    #------------------------------------------------------------------------------
    T 473000000 6MHz 3/4 NONE QAM64 8k 1/8 NONE
    T 0 AUTO NONE NONE QPSK 2k 1/32 NONE
    T 479000000 6MHz 3/4 NONE QAM16 8k 1/8 NONE
    T 0 6MHz 1/2 NONE QPSK 2k 1/4 NONE
    T 0 AUTO NONE NONE QPSK 2k 1/32 NONE
#30

Updated by saen acro 21 days ago

 #------------------------------------------------------------------------------
 # file automatically generated by w_scan
 # (http://wirbel.htpc-forum.de/w_scan/index2.html)
 #! <w_scan> 20170107 1 0 TERRESTRIAL CO </w_scan>
 #------------------------------------------------------------------------------
 # location and provider: <add description here>
 # date (yyyy-mm-dd)    : 2019-12-31
 # provided by (opt)    : <your name or email here>
 #
 # T[2] <freq> <bw> <fec_hi> <fec_lo> <mod> <tm> <guard> <hi> [plp_id] [# comment]
 #------------------------------------------------------------------------------
 T 473000000 6MHz  3/4 NONE    QAM64   8k  1/8 NONE
 T         0 AUTO NONE NONE     QPSK   2k 1/32 NONE
 T 479000000 6MHz  3/4 NONE    QAM16   8k  1/8 NONE
 T         0 6MHz  1/2 NONE     QPSK   2k  1/4 NONE
 T         0 AUTO NONE NONE     QPSK   2k 1/32 NONE

There is something wrong with this,
only two lines have valid frequency.
Other 3 dont have frequency.

Is your antena pointed good?

#31

Updated by Castor 007 20 days ago

Look

T 473000000 6MHz 3/4 NONE QAM64 8k 1/8 NONE
T 0 AUTO NONE NONE QPSK 2k 1/32 NONE
T 479000000 6MHz 3/4 NONE QAM16 8k 1/8 NONE
T 0 6MHz 1/2 NONE QPSK 2k 1/4 NONE
T 0 AUTO NONE NONE QPSK 2k 1/32 NONE

[http: 10.0.108.253: using ticket cfa10dd3982d7444da24bd0f47ef38c2cc3adbca for /stream/mux/86da567c97a493cc4abd43a3fda6fff8

2019-12-31 15:10:20.279 subscription: 00A9: "HTTP" subscribing to mux "479MHz", weight: 10, adapter: "TurboSight TBS 6205 DVB-T/T2/C #0 : DVB-T #0", network: "Nacionales", service: "Raw PID Subscription", hostname="10.0.108.253", client="VLC/3.0.8 LibVLC/3.0.8"
2019-12-31 15:10:20.421 subscription: 00A8: "HTTP" unsubscribing, hostname="10.0.108.253", client="VLC/3.0.8 LibVLC/3.0.8"
2019-12-31 15:10:23.467 mpegts: 479MHz in Nacionales - scan no data, failed
2019-12-31 15:10:26.422 subscription: 00A9: service instance is bad, reason: No input detected
2019-12-31 15:10:26.422 mpegts: 479MHz in Nacionales - tuning on TurboSight TBS 6205 DVB-T/T2/C #1 : DVB-T #0
2019-12-31 15:10:26.423 subscription: 00A9: "HTTP" subscribing to mux "479MHz", weight: 10, adapter: "TurboSight TBS 6205 DVB-T/T2/C #1 : DVB-T #0", network: "Nacionales", service: "Raw PID Subscription", hostname="10.0.108.253", client="VLC/3.0.8 LibVLC/3.0.8"
2019-12-31 15:10:28.141 http: 10.0.108.253: using ticket cfa10dd3982d7444da24bd0f47ef38c2cc3adbca for /stream/mux/86da567c97a493cc4abd43a3fda6fff8
2019-12-31 15:10:28.142 subscription: 00AA: "HTTP" subscribing to mux "479MHz", weight: 10, adapter: "TurboSight TBS 6205 DVB-T/T2/C #1 : DVB-T #0", network: "Nacionales", service: "Raw PID Subscription", hostname="10.0.108.253", client="VLC/3.0.8 LibVLC/3.0.8"
2019-12-31 15:10:28.423 subscription: 00A9: "HTTP" unsubscribing, hostname="10.0.108.253", client="VLC/3.0.8 LibVLC/3.0.8"
2019-12-31 15:10:34.424 subscription: 00AA: service instance is bad, reason: No input detected
2019-12-31 15:10:34.425 mpegts: 479MHz in Nacionales - tuning on TurboSight TBS 6205 DVB-T/T2/C #0 : DVB-T #0
2019-12-31 15:10:34.425 subscription: 00AA: "HTTP" subscribing to mux "479MHz", weight: 10, adapter: "TurboSight TBS 6205 DVB-T/T2/C #0 : DVB-T #0", network: "Nacionales", service: "Raw PID Subscription", hostname="10.0.108.253", client="VLC/3.0.8 LibVLC/3.0.8"
2019-12-31 15:10:40.428 subscription: 00AA: service instance is bad, reason: No input detected
]

#32

Updated by saen acro 20 days ago

Televes DAT BOSS UHF G 42DB LTE 5G ANTENNA
It is powered at 12V and 24V indistinctly and captures channel 21 through 48

On backgroung there is a WIFI antena with must be at less 2 meters away, or your point is to add noise?

Playing mux with VLC is not good idea
use old 100% working playlist
http://tvh.ip.or.dns:9981/playlist/channels

#33

Updated by Castor 007 12 days ago

saen acro wrote:

Televes DAT BOSS UHF G 42DB LTE 5G ANTENNA
It is powered at 12V and 24V indistinctly and captures channel 21 through 48

On backgroung there is a WIFI antena with must be at less 2 meters away, or your point is to add noise?

Playing mux with VLC is not good idea
use old 100% working playlist
http://tvh.ip.or.dns:9981/playlist/channels

Problem Solved

#34

Updated by saen acro 12 days ago

Its not clear how you solve it.

Also available in: Atom PDF