Bug #5133

Incorrect work of USALS

Added by Vlad Lanetz over 4 years ago. Updated over 4 years ago.

Target version:
Start date:
Due date:
% Done:


Estimated time:
Found in version:
HTS Tvheadend 4.3-1273~g610c6fa
Affected Versions:


There is a TBS5580 and a Moteck SG-2500 motor. Periodically, the motor can start moving only after I start the channel several times in a row. After a long downtime (more than 8-10 hours) the same problems.


Screenshot_2.png (9.37 KB) Screenshot_2.png Vlad Lanetz, 2018-06-21 12:34
Screenshot_1.png (18.1 KB) Screenshot_1.png Vlad Lanetz, 2018-06-21 12:34
Screenshot_4.png (4.43 KB) Screenshot_4.png Vlad Lanetz, 2018-06-21 12:34
Screenshot_5.png (6.86 KB) Screenshot_5.png Vlad Lanetz, 2018-06-21 12:34
Screenshot_6.png (12.6 KB) Screenshot_6.png Vlad Lanetz, 2018-06-21 12:34
tvheadend.log (5.49 KB) tvheadend.log Vlad Lanetz, 2018-06-22 08:11



Updated by Jaroslav Kysela over 4 years ago

--trace linuxdvb,diseqc :

Describe the log (assign time to the action or what action do you expect).
Also, describe your equipment (topology). I would prefer this than to pick the info from the config images.


Updated by Vlad Lanetz over 4 years ago

TBS5580 -> Diseqc 1.0 4 port -> Motor
First I started the channel with a 53E but the motor on it not turned, after launched channels 60E and there he began to move.


Updated by Jaroslav Kysela over 4 years ago

Try to increase DiseqC repeats for the rotor config. If you look to the log, the tvh correctly sends the USALS diseqc commands and waits for the rotor move.


Updated by Vlad Lanetz over 4 years ago

I tried pointing out 1 and 2 but it didn't help.


Updated by Digi Hoe over 4 years ago

Do you have the problem if you use port1 for the motor on your switch?

Best regards!


Updated by Vlad Lanetz over 4 years ago

Unfortunately, did not help

Also available in: Atom PDF