Project

General

Profile

Bug #4728

Unsupport DVN jet 5.3 ,Request CAID error

Added by shengkun zang about 4 years ago. Updated about 4 years ago.

Status:
New
Priority:
Normal
Assignee:
-
Category:
API
Target version:
-
Start date:
2017-11-16
Due date:
% Done:

0%

Estimated time:
Found in version:
HTS Tvheadend 4.2.4-19~gdbbaa51
Affected Versions:

Description

My cable system is DVN jet 5.3, but TVH can't support it. If oscam forces CAID, ECM data is not available. If the CAID is not enforced, the data of another CAID is acquired, and the decryption fail。

oscam log:

2017/11/16 11:27:32 08DA075A r (reader) Reader-1 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2017/11/16 11:27:32 08DA075A r (reader) Reader-1 [mouse] card detected
2017/11/16 11:27:32 08DA075A r (reader) Reader-1 [mouse] Buffers readed 0 bytes total time_us 75110
2017/11/16 11:27:34 08DA075A r (reader) Reader-1 [mouse] ATR: 3B 7F 12 00 00 44 56 4E 20 54 45 43 48 20 52 65 76 35 33 44
2017/11/16 11:27:34 08DA075A r (reader) Reader-1 [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/16 11:27:34 08DA075A r (reader) Reader-1 [mouse] Setting baudrate to 19200 bps
2017/11/16 11:27:34 08DA075A r (reader) Reader-1 [mouse] Calculated work ETU is 52.10 us reader mhz = 357
2017/11/16 11:27:34 08DA075A r (reader) Reader-1 [mouse] Buffers readed 0 bytes total time_us 75126
2017/11/16 11:27:34 08DA075A r (reader) Reader-1 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2017/11/16 11:27:35 08DA075A r (reader) Reader-1 [mouse] DVN Jetcas version 5.3 card detect
2017/11/16 11:27:35 08DA075A r (reader) Reader-1 [mouse] serial step1,SN
2017/11/16 11:27:35 08DA075A r (reader) 92 58 01 04 73 49 5F BC
2017/11/16 11:27:38 08DA075A r (reader) Reader-1 [mouse] type: jet, caid: 4A30, serial: 10545179646113701820, hex serial: 9258010473495FBC, boxkey: F2638E206AC603C23EBB618ED69B44D26E3BA7DD4987D61E3BA466C821B56418
2017/11/16 11:27:38 08DA075A r (reader) Reader-1 [mouse] found card system dvn
2017/11/16 11:27:38 08DA075A r (reader) Reader-1 [dvn] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/16 11:27:38 08DA075A r (reader) Reader-1 [dvn] entitlements for (4A30:000000):
2017/11/16 11:27:38 08DA075A r (reader) Reader-1 [dvn] chid: 0013 date: 2009/10/23 - 2020/12/01
2017/11/16 11:27:38 08DA075A r (reader) Reader-1 [dvn] chid: 0001 date: 2009/10/23 - 2020/12/01
2017/11/16 11:27:39 00000000 s (main) init for all local cards done
2017/11/16 11:27:39 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2017/11/16 11:27:39 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2017/11/16 11:27:39 00000000 s (anticasc) anti cascading disabled
2017/11/16 11:27:39 05ACBA2D c (client) plain dvbapi-client granted (1, au=off)
2017/11/16 11:27:39 05ACBA2D c (dvbapi) dvbapi channelcache loaded from /etc/oscam/oscam.ccache
2017/11/16 11:27:39 05ACBA2D c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2017/11/16 11:28:20 05ACBA2D c (dvbapi) Client connected: 'Tvheadend 4.2.4-19~gdbbaa51' (protocol version = 2)
2017/11/16 11:31:20 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 4A30 ECM_PID: 18DF PROVID: 000006
2017/11/16 11:31:20 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 4A02 ECM_PID: 18E0 PROVID: 000009
2017/11/16 11:31:20 05ACBA2D c (dvbapi) Demuxer 0 found 2 ECMpids and 1 STREAMpids in caPMT
2017/11/16 11:31:20 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4A30 PROVID 000006 ECMPID 18DF ANY CHID PMTPID 0000 VPID 18D9
2017/11/16 11:31:21 05ACBA2D c (dvbapi) Demuxer 0 found 2 ECMpids and 2 STREAMpids in PMT

oscam not forces CAID

2017/11/16 11:39:53 05ACBA2D c (dvbapi) Demuxer 0 stop descrambling program number 027C ([email protected]:027C unknown)
2017/11/16 11:40:10 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 4A30 ECM_PID: 18DF PROVID: 000006
2017/11/16 11:40:10 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 4A02 ECM_PID: 18E0 PROVID: 000009
2017/11/16 11:40:10 05ACBA2D c (dvbapi) Demuxer 0 found 2 ECMpids and 1 STREAMpids in caPMT
2017/11/16 11:40:10 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4A30 PROVID 000006 ECMPID 18DF ANY CHID PMTPID 0000 VPID 18D9
2017/11/16 11:40:10 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 4A02 PROVID 000009 ECMPID 18E0 ANY CHID PMTPID 0000 VPID 18D9
2017/11/16 11:40:11 05ACBA2D c (ecm) 1 ([email protected]/9601/027C/8E:B75A804462179EA300DA45DE525FC773): rejected group (0 ms) (no matching reader)
2017/11/16 11:40:16 05ACBA2D c (ecm) 1 ([email protected]/9601/027C/8E:31B1E9D06F0E9D7C307377C26CE67BE9): rejected group (0 ms) (no matching reader)


Files

CA.png (21.3 KB) CA.png shengkun zang, 2017-11-16 04:35
oscam.png (38 KB) oscam.png shengkun zang, 2017-11-16 04:36
channel2.png (37.6 KB) channel2.png shengkun zang, 2017-11-16 04:36
channel.png (18.8 KB) channel.png shengkun zang, 2017-11-16 04:36
tvheadend.log (3.37 MB) tvheadend.log tvhlog shengkun zang, 2017-11-16 22:47
tvheadend.log (3.37 MB) tvheadend.log 1111 shengkun zang, 2017-11-16 22:53
tvheadend.log (6.72 MB) tvheadend.log not force CAID 4130 and foce CAID 4a30 shengkun zang, 2017-11-16 22:59
tvheadend.log (2.33 MB) tvheadend.log include CAPMT data shengkun zang, 2017-11-16 23:40
CAN-decoded-DVBVIEWER-Plugins.zip (452 KB) CAN-decoded-DVBVIEWER-Plugins.zip In windows dvbviewer plugin files can shengkun zang, 2017-11-17 02:42
11-17_09-01-57_浙江卫视高清_外科风云(37).ts (14.6 MB) 11-17_09-01-57_浙江卫视高清_外科风云(37).ts Decrypt video files shengkun zang, 2017-11-17 02:45
New Cable_Channels.ini 754 11-17 10-04-34.ts (36.5 MB) New Cable_Channels.ini 754 11-17 10-04-34.ts With ECM EMM CAT data shengkun zang, 2017-11-17 03:08
tvheadend.log (679 KB) tvheadend.log tvh trace log shengkun zang, 2017-11-23 15:24
log.txt (25.4 KB) log.txt oscam log shengkun zang, 2017-11-23 15:25
oscam log and tvh is force caid 4A30 .txt (44.9 KB) oscam log and tvh is force caid 4A30 .txt shengkun zang, 2017-11-23 16:23
tvhlog-and-ca-steam-filters-caid 4a30.log (239 KB) tvhlog-and-ca-steam-filters-caid 4a30.log shengkun zang, 2017-11-23 16:24
tvhlog-tvhlog-and-ca-not-steam-filters-caid 4a30.log (260 KB) tvhlog-tvhlog-and-ca-not-steam-filters-caid 4a30.log shengkun zang, 2017-11-23 16:25
oscam log but tvh not force caid 4A30.txt.txt (44.9 KB) oscam log but tvh not force caid 4A30.txt.txt shengkun zang, 2017-11-23 16:25
oscam log not force CAID 4a30.txt (44.9 KB) oscam log not force CAID 4a30.txt shengkun zang, 2017-11-23 17:14
tvheadend log not force CAID 4A30.log (138 KB) tvheadend log not force CAID 4A30.log shengkun zang, 2017-11-23 17:14
oscam log and tvh force CAID 4A30.txt (44.9 KB) oscam log and tvh force CAID 4A30.txt shengkun zang, 2017-11-23 17:24
tvheadend log and force caid 4a30.log (125 KB) tvheadend log and force caid 4a30.log shengkun zang, 2017-11-23 17:24
tvheadend.log (282 KB) tvheadend.log shengkun zang, 2017-11-24 08:44
log.txt (44.9 KB) log.txt shengkun zang, 2017-11-24 13:56
tvheadend.log (201 KB) tvheadend.log shengkun zang, 2017-11-24 13:56
tvheadend.log (1.76 MB) tvheadend.log shengkun zang, 2017-11-24 16:20
tvheadend.log (334 KB) tvheadend.log tvh log shengkun zang, 2017-11-25 06:34
oscam-128-can-work-dvn.txt (43.8 KB) oscam-128-can-work-dvn.txt oscam log shengkun zang, 2017-11-25 06:34

Associated revisions

Revision 41624278 (diff)
Added by Jaroslav Kysela about 4 years ago

capmt: DVN ECM changes, issue #4728

History

#1

Updated by Jaroslav Kysela about 4 years ago

  • Status changed from New to Invalid

It looks like oscam issue, try to handle your CAID priorities in oscam.dvbapi: http://www.streamboard.tv/wiki/OSCam/en/Config/oscam.dvbapi

#2

Updated by Jaroslav Kysela about 4 years ago

You can also filter out 4A30 in the CA tab (stream filters) in tvheadend.

#3

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

You can also filter out 4A30 in the CA tab (stream filters) in After testing, your scheme does not work.

In the TS stream, the header of the ECM data is not standard data.
The standard data is 0x80 or 0x81
The dvn jet data’head is 0x50

#4

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

You can also filter out 4A30 in the CA tab (stream filters) in tvheadend.

Sorry, maybe you misunderstood me. It's not CAID's priority problem. It's the file header problem of TS streaming. Do I need to provide TS streaming files?
After testing, your scheme does not work.
In the TS stream, the header of the ECM data is not standard data.
The standard data is 0x80 or 0x81
The dvn jet data’head is 0x50

#5

Updated by Jaroslav Kysela about 4 years ago

  • Status changed from Invalid to New

OK, there's a fault in my comments, you have CAID 4A30 on your card. Anyway, oscam is trying to use 4A02 for a reason, so you should convice oscam to use CAID 4A30 as first.

Different value which identifies the ECM might be a problem. Could you provide example dumps of ECMs for dvn jet ?

#6

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

OK, there's a fault in my comments, you have CAID 4A30 on your card. Anyway, oscam is trying to use 4A02 for a reason, so you should convice oscam to use CAID 4A30 as first.

Different value which identifies the ECM might be a problem. Could you provide example dumps of ECMs for dvn jet ?

In oscam, CAID has been forced to be 4A30, and TVH is forced CAID to be 4A30 at the same time, but the requested data is wrong, and there are some unknow information
Now, China is midnight, and tomorrow morning, I'll give you a video file that hasn't been declassified.

#8

Updated by Jaroslav Kysela about 4 years ago

shengkun zang wrote:

In oscam, CAID has been forced to be 4A30, and TVH is forced CAID to be 4A30 at the same time, but the requested data is wrong, and there are some unknow information
Now, China is midnight, and tomorrow morning, I'll give you a video file that hasn't been declassified.

Provide just example ECM dump from oscam - debug level 2 and wait for ECM data.

It seems that DVN jet is not officially supported in the standard oscam. Please, provide (or sent the source / URL) of your oscam's changes.

#9

Updated by saen acro about 4 years ago

Jaroslav in China is in use this Oscam

#10

Updated by Jaroslav Kysela about 4 years ago

Ok, it appears that first byte is 0x50 indeed. I don't see the reason, why this ECM should be ignored by tvh. There's no filter for this. Provide '--trace descrambler,dvbapi' for tvheadend, too. https://tvheadend.org/projects/tvheadend/wiki/Traces

The ECM dump or TS contents is not required more.

#11

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

shengkun zang wrote:

In oscam, CAID has been forced to be 4A30, and TVH is forced CAID to be 4A30 at the same time, but the requested data is wrong, and there are some unknow information
Now, China is midnight, and tomorrow morning, I'll give you a video file that hasn't been declassified.

Provide just example ECM dump from oscam - debug level 2 and wait for ECM data.

It seems that DVN jet is not officially supported in the standard oscam. Please, provide (or sent the source / URL) of your oscam's changes.

I will send this data to you !Thanks!

#12

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

shengkun zang wrote:

In oscam, CAID has been forced to be 4A30, and TVH is forced CAID to be 4A30 at the same time, but the requested data is wrong, and there are some unknow information
Now, China is midnight, and tomorrow morning, I'll give you a video file that hasn't been declassified.

Provide just example ECM dump from oscam - debug level 2 and wait for ECM data.

It seems that DVN jet is not officially supported in the standard oscam. Please, provide (or sent the source / URL) of your oscam's changes.

If oscam not forces CAID------oscam log
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [mouse] found card system dvn
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [dvn] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [dvn] entitlements for (4A30:000000):
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [dvn] chid: 0013 date: 2009/10/23 - 2020/12/01
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [dvn] chid: 0001 date: 2009/10/23 - 2020/12/01
2017/11/17 05:36:36 05ACBA2D c (dvbapi) Demuxer 0 stop descrambling program number 0146 ([email protected]:0146 unknown)
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 4A30 ECM_PID: 0C37 PROVID: 000080
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 4A02 ECM_PID: 0C38 PROVID: 000009
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 found 2 ECMpids and 1 STREAMpids in caPMT
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4A30 PROVID 000080 ECMPID 0C37 ANY CHID PMTPID 0000 VPID 0C31
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 4A02 PROVID 000009 ECMPID 0C38 ANY CHID PMTPID 0000 VPID 0C31
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 stop descrambling program number 0138 ([email protected]:0138 unknown)
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 4A30 ECM_PID: 0C37 PROVID: 000027
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 4A02 ECM_PID: 0C38 PROVID: 000009
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 found 2 ECMpids and 1 STREAMpids in caPMT
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4A30 PROVID 000027 ECMPID 0C37 ANY CHID PMTPID 0000 VPID 0C31
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 4A02 PROVID 000009 ECMPID 0C38 ANY CHID PMTPID 0000 VPID 0C31
2017/11/17 05:37:41 05ACBA2D c (ecm) get cw for ecm:
2017/11/17 05:37:41 05ACBA2D c (ecm) 81 70 76 EC EF 14 96 01 05 19 82 00 12 17 6B 83
2017/11/17 05:37:41 05ACBA2D c (ecm) 9B F0 2F D8 02 42 0D FE 86 EA C0 77 DC 45 21 12
2017/11/17 05:37:41 05ACBA2D c (ecm) 58 80 3A 14 96 53 EC EF C0 04 19 83 2A 7D 24 C5
2017/11/17 05:37:41 05ACBA2D c (ecm) D8 1C F9 8C 59 D1 22 23 6A 25 E9 2C AC 5A 7A 89
2017/11/17 05:37:41 05ACBA2D c (ecm) 3A 8B 6F A6 B0 9A 02 09 00 01 00 01 94 5C 85 43
2017/11/17 05:37:41 05ACBA2D c (ecm) 7A A9 8D A1 04 3B 8A EC 1E 6A 07 A0 09 00 01 EA
2017/11/17 05:37:41 05ACBA2D c (ecm) 57 F7 49 F1 A9 96 F6 6F 01 EE 0C 68 EA 4D A6 F3
2017/11/17 05:37:41 05ACBA2D c (ecm) 0F F9 1B E4 D2 41 00 03 D5
2017/11/17 05:37:41 05ACBA2D c (ecm) 1 ([email protected]/9601/0138/79:2C4CDB3C89F6B47C177CAF39759B9C2E): rejected group (0 ms) (no matching reader)
2017/11/17 05:37:41 05ACBA2D c (ecm) cw:
2017/11/17 05:37:41 05ACBA2D c (ecm) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2017/11/17 05:37:48 05ACBA2D c (ecm) get cw for ecm:
2017/11/17 05:37:48 05ACBA2D c (ecm) 80 70 76 EC F0 14 96 01 05 19 82 00 12 1A 5E 86
2017/11/17 05:37:48 05ACBA2D c (ecm) 7D 40 C5 30 17 80 0B 1F 42 86 B0 3B 78 6B FC 12
2017/11/17 05:37:48 05ACBA2D c (ecm) 58 80 3A 14 96 53 EC F0 C0 04 19 83 2A 84 8B C0
2017/11/17 05:37:48 05ACBA2D c (ecm) 5F F1 17 91 93 74 41 48 C8 09 11 43 53 64 34 AB
2017/11/17 05:37:48 05ACBA2D c (ecm) 90 7E 9F FB 7F A6 02 09 00 01 00 01 39 CF D7 E5
2017/11/17 05:37:48 05ACBA2D c (ecm) 80 C4 E1 8B C3 B2 E8 07 DD DA 55 DC 09 00 01 EA
2017/11/17 05:37:48 05ACBA2D c (ecm) 57 DE 11 29 2A 4A 17 DC 2F C9 33 1C 58 86 41 95
2017/11/17 05:37:48 05ACBA2D c (ecm) A2 7F 10 84 E3 CA D3 6F 2D
2017/11/17 05:37:48 05ACBA2D c (ecm) 1 ([email protected]/9601/0138/79:B40806546673B58AFE8210FACC104D83): rejected group (0 ms) (no matching reader)
2017/11/17 05:37:48 05ACBA2D c (ecm) cw:
2017/11/17 05:37:48 05ACBA2D c (ecm) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

tvh log in file! please cheak the same time log!

#14

Updated by shengkun zang about 4 years ago

shengkun zang wrote:

Jaroslav Kysela wrote:

shengkun zang wrote:

In oscam, CAID has been forced to be 4A30, and TVH is forced CAID to be 4A30 at the same time, but the requested data is wrong, and there are some unknow information
Now, China is midnight, and tomorrow morning, I'll give you a video file that hasn't been declassified.

Provide just example ECM dump from oscam - debug level 2 and wait for ECM data.

It seems that DVN jet is not officially supported in the standard oscam. Please, provide (or sent the source / URL) of your oscam's changes.

If oscam not forces CAID------oscam log
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [mouse] found card system dvn
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [dvn] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [dvn] entitlements for (4A30:000000):
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [dvn] chid: 0013 date: 2009/10/23 - 2020/12/01
2017/11/17 05:36:30 2761B4E4 r (reader) Reader-1 [dvn] chid: 0001 date: 2009/10/23 - 2020/12/01
2017/11/17 05:36:36 05ACBA2D c (dvbapi) Demuxer 0 stop descrambling program number 0146 ([email protected]:0146 unknown)
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 4A30 ECM_PID: 0C37 PROVID: 000080
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 4A02 ECM_PID: 0C38 PROVID: 000009
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 found 2 ECMpids and 1 STREAMpids in caPMT
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4A30 PROVID 000080 ECMPID 0C37 ANY CHID PMTPID 0000 VPID 0C31
2017/11/17 05:37:39 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 4A02 PROVID 000009 ECMPID 0C38 ANY CHID PMTPID 0000 VPID 0C31
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 stop descrambling program number 0138 ([email protected]:0138 unknown)
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 4A30 ECM_PID: 0C37 PROVID: 000027
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 4A02 ECM_PID: 0C38 PROVID: 000009
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 found 2 ECMpids and 1 STREAMpids in caPMT
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4A30 PROVID 000027 ECMPID 0C37 ANY CHID PMTPID 0000 VPID 0C31
2017/11/17 05:37:40 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 4A02 PROVID 000009 ECMPID 0C38 ANY CHID PMTPID 0000 VPID 0C31
2017/11/17 05:37:41 05ACBA2D c (ecm) get cw for ecm:
2017/11/17 05:37:41 05ACBA2D c (ecm) 81 70 76 EC EF 14 96 01 05 19 82 00 12 17 6B 83
2017/11/17 05:37:41 05ACBA2D c (ecm) 9B F0 2F D8 02 42 0D FE 86 EA C0 77 DC 45 21 12
2017/11/17 05:37:41 05ACBA2D c (ecm) 58 80 3A 14 96 53 EC EF C0 04 19 83 2A 7D 24 C5
2017/11/17 05:37:41 05ACBA2D c (ecm) D8 1C F9 8C 59 D1 22 23 6A 25 E9 2C AC 5A 7A 89
2017/11/17 05:37:41 05ACBA2D c (ecm) 3A 8B 6F A6 B0 9A 02 09 00 01 00 01 94 5C 85 43
2017/11/17 05:37:41 05ACBA2D c (ecm) 7A A9 8D A1 04 3B 8A EC 1E 6A 07 A0 09 00 01 EA
2017/11/17 05:37:41 05ACBA2D c (ecm) 57 F7 49 F1 A9 96 F6 6F 01 EE 0C 68 EA 4D A6 F3
2017/11/17 05:37:41 05ACBA2D c (ecm) 0F F9 1B E4 D2 41 00 03 D5
2017/11/17 05:37:41 05ACBA2D c (ecm) 1 ([email protected]/9601/0138/79:2C4CDB3C89F6B47C177CAF39759B9C2E): rejected group (0 ms) (no matching reader)
2017/11/17 05:37:41 05ACBA2D c (ecm) cw:
2017/11/17 05:37:41 05ACBA2D c (ecm) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2017/11/17 05:37:48 05ACBA2D c (ecm) get cw for ecm:
2017/11/17 05:37:48 05ACBA2D c (ecm) 80 70 76 EC F0 14 96 01 05 19 82 00 12 1A 5E 86
2017/11/17 05:37:48 05ACBA2D c (ecm) 7D 40 C5 30 17 80 0B 1F 42 86 B0 3B 78 6B FC 12
2017/11/17 05:37:48 05ACBA2D c (ecm) 58 80 3A 14 96 53 EC F0 C0 04 19 83 2A 84 8B C0
2017/11/17 05:37:48 05ACBA2D c (ecm) 5F F1 17 91 93 74 41 48 C8 09 11 43 53 64 34 AB
2017/11/17 05:37:48 05ACBA2D c (ecm) 90 7E 9F FB 7F A6 02 09 00 01 00 01 39 CF D7 E5
2017/11/17 05:37:48 05ACBA2D c (ecm) 80 C4 E1 8B C3 B2 E8 07 DD DA 55 DC 09 00 01 EA
2017/11/17 05:37:48 05ACBA2D c (ecm) 57 DE 11 29 2A 4A 17 DC 2F C9 33 1C 58 86 41 95
2017/11/17 05:37:48 05ACBA2D c (ecm) A2 7F 10 84 E3 CA D3 6F 2D
2017/11/17 05:37:48 05ACBA2D c (ecm) 1 ([email protected]/9601/0138/79:B40806546673B58AFE8210FACC104D83): rejected group (0 ms) (no matching reader)
2017/11/17 05:37:48 05ACBA2D c (ecm) cw:
2017/11/17 05:37:48 05ACBA2D c (ecm) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

tvh log in file! please cheak the same time log!

if oscam force caid 4130
2017/11/17 05:48:21 17E12EFC r (reader) Reader-1 [dvn] chid: 0013 date: 2009/10/23 - 2020/12/01
2017/11/17 05:48:21 17E12EFC r (reader) Reader-1 [dvn] chid: 0001 date: 2009/10/23 - 2020/12/01
2017/11/17 05:54:51 05ACBA2D c (dvbapi) Demuxer 0 stop descrambling program number 0138 ([email protected]:0138 unknown)
2017/11/17 05:55:01 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 4A30 ECM_PID: 0C37 PROVID: 000027
2017/11/17 05:55:01 05ACBA2D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 4A02 ECM_PID: 0C38 PROVID: 000009
2017/11/17 05:55:01 05ACBA2D c (dvbapi) Demuxer 0 found 2 ECMpids and 1 STREAMpids in caPMT
2017/11/17 05:55:01 05ACBA2D c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 4A30 PROVID 000027 ECMPID 0C37 ANY CHID PMTPID 0000 VPID 0C31
2017/11/17 05:58:04 05ACBA2D c (dvbapi) Demuxer 0 stop descrambling program number 0138 ([email protected]:0138 unknown)

#16

Updated by shengkun zang about 4 years ago

this is tvheadend Traces data!thanks!

#18

Updated by shengkun zang about 4 years ago

With ECM EMM CAT data and not declassified video file!
It's possible that local cable operators use nonstandard streaming media.
Thank U very much!

#19

Updated by Jaroslav Kysela about 4 years ago

apply this patch and report back the log (with traces):

diff --git a/src/descrambler/descrambler.c b/src/descrambler/descrambler.c
index 653a4e314..ad1ec867d 100644
--- a/src/descrambler/descrambler.c
+++ b/src/descrambler/descrambler.c
@@ -1209,6 +1209,8 @@ descrambler_table_callback

   if (len < 6)
     return 0;
+  tvhtrace(LS_DESCRAMBLER, "ECM data for PID %04X (%d)", mt->mt_pid, mt->mt_pid);
+  tvhlog_hexdump(LS_DESCRAMBLER, ptr, len);
   LIST_INIT(&sections);
   pthread_mutex_lock(&mt->mt_mux->mm_descrambler_lock);
   TAILQ_FOREACH(ds, &dt->sections, link) {
#20

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

apply this patch and report back the log (with traces):

[...]

Please wait until I recompile and test. Thank you!

#21

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

apply this patch and report back the log (with traces):

[...]

so sorry ,It seems not wokring!

#22

Updated by Jaroslav Kysela about 4 years ago

Please, attach the logs from tvheadend and oscam for ONE service only. Just start oscam , start tvheadend, try to stream one service and upload logs.

Also, set loglevel 128 (oscam).

#23

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

Please, attach the logs from tvheadend and oscam for ONE service only. Just start oscam , start tvheadend, try to stream one service and upload logs.

Also, set loglevel 128 (oscam).

this is force caid 4A30 log file!

#24

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

Please, attach the logs from tvheadend and oscam for ONE service only. Just start oscam , start tvheadend, try to stream one service and upload logs.

Also, set loglevel 128 (oscam).

this is not force caid 4A30 log file!

#25

Updated by Jaroslav Kysela about 4 years ago

The code from comment 19 was not added or you forgot to add descrambler to --trace. The --trace string should be 'descrambler,capmt'.

#26

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

The code from comment 19 was not added or you forgot to add descrambler to --trace. The --trace string should be 'descrambler,capmt'.

the new log .thanks!

#27

Updated by shengkun zang about 4 years ago

shengkun zang wrote:

Jaroslav Kysela wrote:

Please, attach the logs from tvheadend and oscam for ONE service only. Just start oscam , start tvheadend, try to stream one service and upload logs.

Also, set loglevel 128 (oscam).

this is not force caid 4A30 log file!

#28

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

The code from comment 19 was not added or you forgot to add descrambler to --trace. The --trace string should be 'descrambler,capmt'.

After using your patch, no matter how I set up CA, I always request CAID 4A02! The problem remains!

#29

Updated by Jaroslav Kysela about 4 years ago

You've not applied my code. The code was added to log the whole ECM only. Anyway, I put some changes to git repo for those non-standard ECM, please, give me another log from latest tvh (for one service).

The only missing thing is to determine if ECM is for even or odd key.

#30

Updated by Jaroslav Kysela about 4 years ago

And use the 4.3 code (compile tvh from sources).

#31

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

And use the 4.3 code (compile tvh from sources).

please check these files!

#32

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

You've not applied my code. The code was added to log the whole ECM only. Anyway, I put some changes to git repo for those non-standard ECM, please, give me another log from latest tvh (for one service).

The only missing thing is to determine if ECM is for even or odd key.

Sorry, I just saw the new version, waiting for me to test!

#33

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

And use the 4.3 code (compile tvh from sources).

Thank you very much. The latest version Build: 4.3-710~g41624278b has been confirmed that it works.
Thank U very much!

#34

Updated by Jaroslav Kysela about 4 years ago

Could you attach the log anyway? As I wrote, the code is not complete if we don't know, if ECM belongs to odd or even key.

#35

Updated by shengkun zang about 4 years ago

Jaroslav Kysela wrote:

Could you attach the log anyway? As I wrote, the code is not complete if we don't know, if ECM belongs to odd or even key.

Everything looks normal.thanks!

#36

Updated by Pablo R. about 4 years ago

Let's wait for Jaroslav answer, but I think you should wait once or twice for the update of the key... ;)

#37

Updated by shengkun zang about 4 years ago

Pablo Rodríguez wrote:

Let's wait for Jaroslav answer, but I think you should wait once or twice for the update of the key... ;)

You've got a point there!

Also available in: Atom PDF