Project

General

Profile

Bug #4696

SNT/Signal Strenght always 0

Added by Alex Platero almost 5 years ago. Updated almost 5 years ago.

Status:
Rejected
Priority:
Normal
Category:
SAT>IP
Target version:
-
Start date:
2017-10-29
Due date:
% Done:

0%

Estimated time:
Found in version:
4.3-589~g7d0e509ba
Affected Versions:

Description

Hi,

Suddenly I haven't got any indication of SNT/signal, it's always set to 0.

Using latest build, but the issue appeared a few builds ago.

I'm using tvheadend with an Inverto Multibox with latest build of Jaroslav satip-axe firmware. I don't know if its an issue with tvheadend nor satip-axe (switched from minisatip5 to minisatip7 this summer).

Can anyone point me any directions?

Thanks

History

#1

Updated by Pablo R. almost 5 years ago

After a month of use my Digibit with "Jaroslav satip-axe firmware" it stop working. Signal and SNR shows at 0% and I have to reboot digibit to get it working again. I dont know if this is your problem... :l

#2

Updated by Jaroslav Kysela almost 5 years ago

  • Status changed from New to Rejected

Yes, it appears like minisatip or driver bug. I noticed it, too. It's not easy to debug this, because it takes awhile to see it. Create a new issue for satip-axe: https://github.com/perexg/satip-axe/issues

#3

Updated by Jaroslav Kysela almost 5 years ago

It appears like a minisatip issue - if you kill the minisatip task, it will be respawned and the signal is back.

#4

Updated by Alex Platero almost 5 years ago

OK gonna try, in my case its only a signal/SNR not showing issue, streaming always works fine.

#5

Updated by Alex Platero almost 5 years ago

BTW sorry Jaroslav for hijacking this section with a satip-axe bug, but knowing that you develop both sources I thinked you wouldn't mind.

Thanks.

Also available in: Atom PDF