Project

General

Profile

Feature #4576

SAT>IP Client: Bind address to the address of one interface

Added by Mono Polimorph almost 2 years ago. Updated almost 2 years ago.

Status:
New
Priority:
Normal
Category:
SAT>IP
Target version:
Start date:
2017-09-08
Due date:
% Done:

0%

Estimated time:

Description

Hi,

In the configuration of the SAT>IP Client tuners we have the option for use a custom address for listening for the RTP traffic. This is required when using a device with multiple network interfaces (for example, one for wired local network, one for wireless local network, and one for a remote vpn link).

The suggestion is to incorporate the option of use the IP address assigned to an interface, and not a fixed address.
Why this? Because for interfaces with DHCP it's impossible to set the address if you can't fix the address.

So, the idea is to support not only a "name" (FNQ or dotted address) but also something like "$eth1" (that indicates 'IP address of the interface eth1').

You agree?

History

#1

Updated by Mono Polimorph almost 2 years ago

Hi,

Can this be scheduled for 4.4 or 4.6 releases?

Thank you!

#2

Updated by Jaroslav Kysela almost 2 years ago

  • Target version set to 4.4

Also available in: Atom PDF