Project

General

Profile

Feature #3088

ACL: block specified IP address/network

Added by cilin dro about 4 years ago. Updated almost 4 years ago.

Status:
Fixed
Priority:
Normal
Assignee:
-
Category:
User Interface
Target version:
Start date:
2015-09-18
Due date:
% Done:

100%

Estimated time:

Description

add an option to limit the user in access entries by IP address

Associated revisions

Revision b7a0a8a0 (diff)
Added by Jaroslav Kysela almost 4 years ago

implement IP blocking feature, fixes #3088

History

#1

Updated by cilin dro about 4 years ago

IP is for the client does not have access

#2

Updated by Jaroslav Kysela about 4 years ago

It should already work. Just define access entries per IP address/network and then you may enter the connection limit per IP. Don't forget to remove the wildcat (*) entry.

#3

Updated by cilin dro about 4 years ago

In what version is available?. I use TVH V 3.9. Can you give me an example of how to limit by IP. can i use username, password and ip to limit connection.

#5

Updated by cilin dro about 4 years ago

the limitation of ip to which I refer is as a blacklist. Adding ip for not allow acces. In tvh you can only assign an IP to connect.

#6

Updated by cilin dro about 4 years ago

This is in case of lots of clients have de same user and pass

#7

Updated by Jaroslav Kysela about 4 years ago

  • Subject changed from limitation by IP address to ACL: block specified IP address/network
#8

Updated by Jaroslav Kysela about 4 years ago

  • Target version set to 4.2
#9

Updated by Jaroslav Kysela almost 4 years ago

  • Status changed from New to Fixed
  • % Done changed from 0 to 100

Also available in: Atom PDF