Project

General

Profile

Bug #2198

Muxes from predefined services not added anymore

Added by Bas S over 8 years ago. Updated about 8 years ago.

Status:
Fixed
Priority:
Normal
Assignee:
-
Category:
DVB
Target version:
-
Start date:
2014-08-04
Due date:
% Done:

0%

Estimated time:
Found in version:
From 4bf8754ef33d925a382f48858cd3d3fd2dc31319
Affected Versions:

Description

After making a new network, e.g. "Ziggo", normally this resulted in the muxes tab being populated with 4 standard Muxes which then were scanned. Of course after enabled in TV Adapters.

However now no muxes are being added and no scanning is performed.
No idea what or where it broke.

Hope to see this fixed soon.

History

#1

Updated by Jos E over 8 years ago

Bas S wrote:

After making a new network, e.g. "Ziggo", normally this resulted in the muxes tab being populated with 4 standard Muxes which then were scanned. Of course after enabled in TV Adapters.

However now no muxes are being added and no scanning is performed.
No idea what or where it broke.

Hope to see this fixed soon.

Work-around is available. It goes wrong the first time, but if you do it again after doing a restart on tvheadend after you have added a tuner-card it works (or does for me?)

#2

Updated by Bas S over 8 years ago

Jos E wrote:

Bas S wrote:

After making a new network, e.g. "Ziggo", normally this resulted in the muxes tab being populated with 4 standard Muxes which then were scanned. Of course after enabled in TV Adapters.

However now no muxes are being added and no scanning is performed.
No idea what or where it broke.

Hope to see this fixed soon.

Work-around is available. It goes wrong the first time, but if you do it again after doing a restart on tvheadend after you have added a tuner-card it works (or does for me?)

Unfortunately not. I think you were just luky..

#3

Updated by Bas S over 8 years ago

Bas S wrote:

After making a new network, e.g. "Ziggo", normally this resulted in the muxes tab being populated with 4 standard Muxes which then were scanned. Of course after enabled in TV Adapters.

However now no muxes are being added and no scanning is performed.
No idea what or where it broke.

Hope to see this fixed soon.

As a inbetween solution I added the correct MUX myself to at least have television again:
/tvheadend/data/dvb-scan/dvb-c/nl-Ziggo
C 356000000 6875000 NONE QAM64 # Main Frequency Ziggo/@Home Zuid

However at this moment the automatic mechanism is still broken.

#4

Updated by Jaroslav Kysela over 8 years ago

  • Status changed from New to Fixed

Fixed in 5a621b2ff0ae0ac110b6d0df9b4a21e0498abccc .

#5

Updated by Bas S about 8 years ago

Just tested, it is still broken (or in the meantime broken again)

Also available in: Atom PDF