Hello everyone,
I have a ;
em28xx 1-1.2:1.0: Identified as Terratec Cinergy T2 Stick HD (card=96) device that I got recently.
I am on Debian bookworm, my lsusb is as following ;
Bus 001 Device 009: ID eb1a:8179 eMPIA Technology, Inc. Terratec Cinergy T2 Stick HD
dmesg output is as such ;
[1545903.550525] usb 1-1.2: new high-speed USB device number 9 using ehci-pci
[1545903.635219] usb 1-1.2: New USB device found, idVendor=eb1a, idProduct=8179, bcdDevice= 2.05
[1545903.635235] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[1545903.635241] usb 1-1.2: Product: USB 28179 Device
[1545903.635245] usb 1-1.2: SerialNumber: 0
[1545903.636257] em28xx 1-1.2:1.0: New device USB 28179 Device @ 480 Mbps (eb1a:8179, interface 0, class 0)
[1545903.636261] em28xx 1-1.2:1.0: DVB interface 0 found: isoc
[1545903.688776] em28xx 1-1.2:1.0: chip ID is em28178
[1545906.352382] em28xx 1-1.2:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x31a6f9bb
[1545906.352396] em28xx 1-1.2:1.0: EEPROM info:
[1545906.352399] em28xx 1-1.2:1.0: microcode start address = 0x0004, boot configuration = 0x01
[1545906.361886] em28xx 1-1.2:1.0: AC97 audio (5 sample rates)
[1545906.361891] em28xx 1-1.2:1.0: 500mA max power
[1545906.361894] em28xx 1-1.2:1.0: Table at offset 0x24, strings=0x226a, 0x048c, 0x0000
[1545906.413558] em28xx 1-1.2:1.0: Identified as Terratec Cinergy T2 Stick HD (card=96)
[1545906.413578] em28xx 1-1.2:1.0: dvb set to isoc mode.
[1545906.413669] em28xx 1-1.2:1.0: Binding DVB extension
[1545906.423009] i2c i2c-9: Added multiplexed i2c bus 10
[1545906.423014] si2168 9-0064: Silicon Labs Si2168-A30 successfully identified
[1545906.423016] si2168 9-0064: firmware version: A 3.0.2
[1545906.427572] si2157 10-0060: Silicon Labs Si2146 successfully attached
[1545906.427605] dvbdev: DVB: registering new adapter (1-1.2:1.0)
[1545906.427609] em28xx 1-1.2:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[1545906.427617] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[1545906.427951] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[1545906.428881] em28xx 1-1.2:1.0: DVB extension successfully initialized
[1545906.428886] em28xx 1-1.2:1.0: Registering input extension
[1545906.429648] Registered IR keymap rc-terratec-slim-2
[1545906.430410] rc rc0: Terratec Cinergy T2 Stick HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/rc/rc0
[1545906.430497] rc rc0: lirc_dev: driver em28xx registered at minor = 0, scancode receiver, no transmitter
[1545906.430547] input: Terratec Cinergy T2 Stick HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/rc/rc0/input19
[1545906.430806] em28xx 1-1.2:1.0: Input extension successfully initialized
it seems to be recognized properly. And from ;
I copied ; dvb-demod-si2168-a30-01.fw from OpenELEC site. After that when I do w_scan I get this at dmesg output;
[1545946.623276] si2168 9-0064: downloading firmware from file 'dvb-demod-si2168-a30-01.fw'
[1545949.594059] si2168 9-0064: firmware version: A 3.0.19
[1545949.606506] si2157 10-0060: unknown chip version Si2176-B30 ROM 0x13
[1545949.625844] si2157 10-0060: unknown chip version Si2176-B30 ROM 0x13
and w_scan does not find any service also led on the device is not blinking thus I think the setup and the device is not working at all.
Can any experienced users provide some insight on how to resolve this issue ?
Thanks in advance,
