Xtreamer Ultra 2
OpenElec compiled 15th October
XBMC 2.0.0
TVHeadend 3.1.694
PCTV (USB) nanoStick T2 detected as Sony CXD2820R (DVB-T/T2)
Could I have some help please, this might be a new bug or two, I need help to decide? Thank you.
I have the above set-up and working very well indeed, receiving UK Freeview TV. (I did have to enter the latest muxes manually via the Tvheadend browser interface.) However, I occasionally get randomly occurring failures, which seem to be related, with the following messages from tvheadend: "Input not detected", "Mux not enabled" or "No hardware present".
"Input not detected". When this failure occurs I can sometimes get it working again by doing a soft power down from the Ultra 2 remote. Other times, I then get "Mux not enabled".
"Mux not enabled". When I get this failure, I usually have to go in through the Tvheadend browser interface to re-enable all the muxes. However, sometimes the check boxes are missing - so I have to click blindly - then save.
"No hardware present". When I get this failure I have to power down by unplugging, then re-powering, then might have to re-enable the muxes.
Does anybody recognise any of this buggy behaviour, or suggest how I should progress this issue? Thank you.
