Elgato DVB>IP Server 1.1.0-402r1, Feb 19 2015, 17:49:21
Name: EyeTV Netstream 4C (2422)
System Status: {"CpuInfo":{"CPUs":1,"Idle":99,"Io":0,"Irq":0,"Nice":0,"Sirq":0,"Sys":0,"Usr":0}}
Board ID: 1
Streams: 4
(# Initialized Type Available Connected Active StreamID Setup Receiving Lock Transcoding TSPacketsReceived rate index sessionID [clientInfo])
#1: 1 6 1 1 0 -1 0 0 1 0 0
#2: 1 6 1 1 0 -1 0 0 0 0 0
#3: 1 6 1 1 0 -1 0 0 0 0 0
#4: 1 6 1 1 0 -1 0 0 0 0 0
Users:
[
]
==== Multicast ====
IP:224.0.0.22 hasMembers:1 refreshCounter: 0 lastReportTime: 120412
IP:239.255.255.250 hasMembers:1 refreshCounter: 0 lastReportTime: 2503
IP:224.0.0.251 hasMembers:1 refreshCounter: 0 lastReportTime: 4363
IP:224.0.0.252 hasMembers:1 refreshCounter: 0 lastReportTime: 120412
IP:224.0.0.2 hasMembers:1 refreshCounter: 0 lastReportTime: 120412
IP:239.2.0.252 hasMembers:1 refreshCounter: 0 lastReportTime: 124152
The date in the Tombea version output does not seem to be the compile date.
[ARCLinux]$ ls -l /usr/bin/T*
-rwxr-xr-x 1 root root 3633240 Feb 19 2015 /usr/bin/Tombea
but your binary seems to be newer anyway.
[ARCLinux]$ Tombea --show-ports -i 1 --show-ip --verbose -D
Elgato DVB>IP Server 1.1.0-402r1, Feb 19 2015, 17:49:21
Compiled for ViXS ARC700 platform, XCode Version 4A5546
Copyright (C) 2013-2014 Elgato Systems GmbH, Germany
setting verbose mode
do not fork into background
17:20:28.8524 2714@ dbgcommand(): using printf
17:20:28.8661 2714@ main(): ===
17:20:28.8667 2714@ main(): # of addresses: 1
17:20:28.8674 2714@ main(): 'eth0': '10.10.0.103'
17:20:28.8680 2714@ main(): ===
17:20:28.8686 2714@ main(): en0 MAC address: '00:0C:6C:08:09:76'
17:20:28.8693 2714@ main(): ===
17:20:28.8699 2714@ main(): en0 IP address: '10.10.0.103'
MAC 00:0C:6C:08:09:76, IP 10.10.0.103 (total 1 IP), S/N 2422
HTTP port 10.10.0.103:80, RTSP port 10.10.0.103:554
17:20:28.8713 2714@ main(): Serial Number: '2422'
17:20:28.8721 2714@ main(): Hardware: Netstream 4C
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x0000097e to mii Register 0x10 (PHY Ctl Reg) ... OK
17:20:28.9013 2714@ ReadMII():
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 mii Register 0x10 (PHY Ctl Reg) = 0x0000097e
17:20:28.9113 2714@ ReadMII():
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 mii Register 0x01 (Phy Status Reg) = 0x0000796d
17:20:28.9214 2714@ ReadMII():
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 mii Register 0x11 (PHY Sts Reg) = 0x0000ad42
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x00000007 to mii Register 0x1f (Page Select Reg) ... OK
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x000000a0 to mii Register 0x1e (Ext Page Sel Reg) ... OK
17:20:28.9512 2714@ ReadMII():
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 mii Register 0x1a (RXC SSC Reg) = 0x00003850
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x00003850 to mii Register 0x1a (RXC SSC Reg) ... OK
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x00000000 to mii Register 0x1f (Page Select Reg) ... OK
17:20:28.9720 2714@ ReconfigurePHY(): Eth0 PHY state: up, ready, 1000M, duplex, crossover
17:20:28.9838 2744@ Watchdog_thread_proc(): +++ Watchdog_thread_proc(): Watchdog Thread Started...
Board ID: 1
17:20:28.9859 2714@ main(): adding VixsDevice #1
17:20:28.9867 2714@ CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:20:28.9881 2714@ CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:20:28.9910 2714@ walk_options(): CEVixsDevice: setting verbose output mode
17:20:28.9958 2714@ CEVixsDeviceController::CEVixsDeviceController(): Loading station list from disk ...
17:20:28.9977 2714@ CESATIPStream::Clear(): clearing
17:20:28.9984 2714@ CESATIPStream::Stop(): stopping 0...
17:20:28.9990 2714@ CESATIPStream::Stop(): stopping 0 done.
17:20:28.9998 2714@ CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:20:29.0004 2714@ CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:20:29.0012 2714@ main(): adding VixsDevice #2
17:20:29.0019 2714@ CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:20:29.0025 2714@ CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:20:29.0049 2714@ CESATIPStream::Clear(): clearing
17:20:29.0058 2714@ CESATIPStream::Stop(): stopping 0...
17:20:29.0064 2714@ CESATIPStream::Stop(): stopping 0 done.
17:20:29.0071 2714@ CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:20:29.0077 2714@ CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:20:29.0085 2714@ main(): adding VixsDevice #3
17:20:29.0093 2714@ CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:20:29.0099 2714@ CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:20:29.0123 2714@ CESATIPStream::Clear(): clearing
17:20:29.0130 2714@ CESATIPStream::Stop(): stopping 0...
17:20:29.0139 2714@ CESATIPStream::Stop(): stopping 0 done.
17:20:29.0146 2714@ CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:20:29.0153 2714@ CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:20:29.0160 2714@ main(): adding VixsDevice #4
17:20:29.0167 2714@ CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:20:29.0173 2714@ CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:20:29.0199 2714@ CESATIPStream::Clear(): clearing
17:20:29.0206 2714@ CESATIPStream::Stop(): stopping 0...
17:20:29.0212 2714@ CESATIPStream::Stop(): stopping 0 done.
17:20:29.0218 2714@ CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:20:29.0225 2714@ CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:20:29.0237 2746@ StaticWorkerThreadEntry(): worker thread running...
17:20:29.0287 2747@ CEplThread::ThreadProc(): ***attaching thread 2747, EPL
17:20:29.0298 2747@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:20:29.0305 2747@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:20:29.0337 2748@ CEplThread::ThreadProc(): ***attaching thread 2748, EPL
17:20:29.0345 2748@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:20:29.0353 2748@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:20:29.0396 2746@ CEplIGMPTracker::Start(): Starting
17:20:29.0398 2746@ CEplIGMPTracker::StartSocket(): Starting on '224.0.0.1'
17:20:29.0405 2746@ CEplIGMPTracker::StartSocket(): Starting on '224.0.0.22'
17:20:29.0417 2746@ CEplIGMPTracker::SendGeneralMembershipQuery(): len=36, lenRequested=36
17:20:29.0423 2746@ CEplIGMPTracker::Process(): 10.10.0.103 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
17:20:29.0437 2747@ walk_options(): VixsHAL: setting verbose output mode
17:20:29.0456 2747@ walk_options(): DVB-C FrontEnd: setting verbose output mode
17:20:29.0461 2747@ I2C_Init(): I2Clib: I2C system clock = 25.000MHz
17:20:29.0463 2747@ I2C_Init(): I2Clib: I2C bus clock = 400kHz
17:20:29.0465 2747@ I2C_Init(): I2Clib: I2C atomic period = 62 sysclocks
17:20:29.0468 2747@ I2C_Init(): I2Clib: I2C bus timeout = 700 sysclocks (11.3 i2cclocks)
17:20:29.0470 2747@ I2C_Init(): I2Clib: I2C read timeout = 3000ms
17:20:29.0472 2747@ I2C_Init(): I2Clib: I2C write timeout = 3000ms
17:20:29.0474 2747@ I2C_Init(): I2Clib: duration warning threshold = 100000us
17:20:29.0475 2747@ DVBC_FE_FrontendInit(): [ZIM1902] Start init first MXL251 ...
17:20:29.0495 2750@ CEplThread::ThreadProc(): ***attaching thread 2750, EPL
17:20:29.0503 2750@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:20:29.0511 2750@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:20:29.0521 2749@ CEplThread::ThreadProc(): ***attaching thread 2749, EPL
17:20:29.0528 2749@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:20:29.0546 2749@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:20:29.0632 2746@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #1...
17:20:29.4889 2747@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:20:29.4896 2747@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 0.0.0.0-RC0 Bootloader: 0.0.0.0
17:20:29.4904 2747@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Loading Mxl firmware from /lib/firmware/MxL251SF_FW_ES2.mbin ...
17:20:29.4918 2747@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Downloading firmware to Mxl device ...
17:20:30.2732 2746@ CESATIPServer::SetIdle(): waited long enough for frontend 1 (11)
17:20:30.2735 2746@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #1 done.
17:20:30.2832 2746@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #2...
17:20:31.2813 2747@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Firmware was successfully downloaded (status=0)
17:20:31.4932 2746@ CESATIPServer::SetIdle(): waited long enough for frontend 2 (11)
17:20:31.4934 2746@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #2 done.
17:20:31.5032 2746@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #3...
17:20:32.7131 2746@ CESATIPServer::SetIdle(): waited long enough for frontend 3 (11)
17:20:32.7134 2746@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #3 done.
17:20:32.7232 2746@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #4...
17:20:33.2887 2747@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:20:33.2894 2747@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 2.1.5.7-RC1 Bootloader: 0.0.0.9
17:20:33.3391 2747@ DVBC_FE_FrontendInit(): [ZIM1902] End init first MXL251
17:20:33.3398 2747@ DVBC_FE_FrontendInit(): [ZIM1902] Start init second MXL251 ...
17:20:33.4805 2747@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:20:33.4812 2747@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 0.0.0.0-RC0 Bootloader: 0.0.0.0
17:20:33.4820 2747@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Loading Mxl firmware from /lib/firmware/MxL251SF_FW_ES2.mbin ...
17:20:33.4829 2747@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Downloading firmware to Mxl device ...
17:20:33.9332 2746@ CESATIPServer::SetIdle(): waited long enough for frontend 4 (11)
17:20:33.9334 2746@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #4 done.
17:20:33.9337 2746@ MyCESATIPServerClient::CESATIPServerClient_IdleMode(): server is idle. Going into low-power mode
17:20:33.9344 2751@ StandbyClock_thread_proc(): +++ StandbyClock_thread_proc(): Standby Clock Thread Started...
17:20:34.0436 2746@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.22' added to multicast list. size() is now 1
17:20:34.0441 2746@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '239.255.255.250' added to multicast list. size() is now 2
17:20:34.0445 2746@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.2' added to multicast list. size() is now 3
17:20:34.0448 2746@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.252' added to multicast list. size() is now 4
17:20:34.0452 2746@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.251' added to multicast list. size() is now 5
17:20:34.7634 2746@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '239.2.0.252' added to multicast list. size() is now 6
17:20:35.2783 2747@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Firmware was successfully downloaded (status=0)
17:20:37.2889 2747@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:20:37.2896 2747@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 2.1.5.7-RC1 Bootloader: 0.0.0.9
17:20:37.3394 2747@ DVBC_FE_FrontendInit(): [ZIM1902] End init second MXL251
17:20:37.3700 2747@ CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:20:37.3708 2747@ CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:20:37.3800 2748@ CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:20:37.3803 2748@ CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:20:37.3900 2750@ CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:20:37.3902 2750@ CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:20:37.3995 2749@ CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:20:37.3998 2749@ CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:20:37.4032 2746@ StaticWorkerThreadEntry(): server initialized after 8361ms
Server initialized after 8361ms
17:20:37.4041 2746@ StaticWorkerThreadEntry(): # of DVB-C frontends: 4
17:20:37.4043 2746@ StaticWorkerThreadEntry(): # of DVB-T frontends: 0
17:20:37.4045 2746@ StaticWorkerThreadEntry(): # of DVB-T2 frontends: 0
17:20:37.4047 2746@ StaticWorkerThreadEntry(): # of DVB-S2 frontends: 0
Number of DVB-C frontends: 4
17:20:37.4059 2746@ CEDeviceHTTPServer::Start(): accepting connections
17:20:37.4067 2746@ CEDeviceHTTPServer::Start(): accepting connections
17:20:37.4072 2746@ StaticWorkerThreadEntry(): Server Name 'EyeTV Netstream 4C (2422)'
17:20:37.4151 2746@ CESATIPServer::SetStreamIDItemName(): changing mStreamIDItemName from "com.ses.streamID" to "com.elgato.streamID"
17:20:37.4165 2746@ CESATIPServer::SetDeviceID(): changing mDeviceID from 1 to 103
17:20:37.4333 2746@ StaticWorkerThreadEntry(): setting RTSP dump to 0 and HTTP dump to 0
17:20:44.0431 2751@ VixsDeviceStandby(): ##### VixsDeviceStandby(1) in #################################################
17:20:44.0434 2751@ VixsDeviceDebug(): g_IDLE_thread_alive = 0, g_IDLE_thread_running = 0
17:20:44.0437 2751@ VixsDeviceDebug(): g_IDLE_thread_started = 0, g_IDLE_thread_stopped = 0
17:20:44.0439 2751@ VixsDeviceDebug(): g_pTaskScheduler.empty = 0, g_pTaskScheduler->empty = 1, g_bTaskValid = 0
17:20:44.0441 2751@ VixsDeviceDebug(): g_bInStandby = 0, g_bStandbyPending = 0
17:20:44.0443 2751@ VixsDeviceDebug(): g_bEnableIdleScan = 0, g_bIdleScanPending = 0, g_bMustAbortScan = 0
17:20:44.0445 2751@ VixsDeviceDebug(): g_bIdleScanStarted = 0, g_bIdleScanFinished = 0, g_iIdleScanProgress = 0
17:20:44.0447 2751@ VixsDeviceDebug(): g_bIdleScanRunning = 0, g_lIdleScanInterval = 604800, default = 604800
17:20:44.0449 2751@ VixsDeviceDebug(): g_LastIdleScanStart = [never] (-1)
17:20:44.0451 2751@ VixsDeviceDebug(): g_LastIdleScanFinish = [never] (-1)
17:20:44.0453 2751@ VixsDeviceDebug(): g_LastIdleScanDuration = [undefined] (-1), Stations Found: 0
17:20:44.0455 2751@ VixsDeviceStandby(): ##### VixsDeviceStandby(1) out ################################################
17:21:00.3235 2746@ CEplIGMPTracker::SendGeneralMembershipQuery(): len=36, lenRequested=36
17:21:00.3243 2746@ CEplIGMPTracker::Process(): 10.10.0.103 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
17:21:42.6533 2746@ CEplIGMPTracker::Process(): 10.10.0.1 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
17:21:42.6542 2746@ CEplIGMPTracker::Process(): we became non-querier because 0x0A0A0067 > 0x0A0A0001
17:22:22.4130 2746@ CESATIPServer::Process(): iter->refreshCounter is now 1 for '239.255.255.250'
17:22:22.4138 2746@ CESATIPServer::Process(): RefreshMcAddr() for '239.255.255.250'
17:22:22.4148 2746@ CEplIGMPTracker::RefreshMcAddr(): len=36, lenRequested=36
17:22:22.4157 2746@ CEplIGMPTracker::Process(): 10.10.0.103 -> 239.255.255.250 mc:239.255.255.250 QRV:2 QQIC:125 numSrc:0
17:22:22.8730 2746@ CESATIPServer::Process(): iter->refreshCounter is now 1 for '239.255.255.250'
17:22:22.8737 2746@ CESATIPServer::Process(): RefreshMcAddr() for '239.255.255.250'
17:22:22.8747 2746@ CEplIGMPTracker::RefreshMcAddr(): len=36, lenRequested=36
17:22:22.8755 2746@ CEplIGMPTracker::Process(): 10.10.0.103 -> 239.255.255.250 mc:239.255.255.250 QRV:2 QQIC:125 numSrc:0
no TV adapter visible.
[ARCLinux]$ Tombea --show-ports -i 1 --no-alternate-discovery --show-ip --verbose -D
Elgato DVB>IP Server 1.1.0-402r1, Feb 19 2015, 17:49:21
Compiled for ViXS ARC700 platform, XCode Version 4A5546
Copyright (C) 2013-2014 Elgato Systems GmbH, Germany
setting verbose mode
using Sat-IP discovery for DVB-C
do not fork into background
17:30:29.7274 2882@ dbgcommand(): using printf
17:30:29.7411 2882@ main(): ===
17:30:29.7418 2882@ main(): # of addresses: 1
17:30:29.7424 2882@ main(): 'eth0': '10.10.0.103'
17:30:29.7430 2882@ main(): ===
17:30:29.7436 2882@ main(): en0 MAC address: '00:0C:6C:08:09:76'
17:30:29.7444 2882@ main(): ===
17:30:29.7450 2882@ main(): en0 IP address: '10.10.0.103'
MAC 00:0C:6C:08:09:76, IP 10.10.0.103 (total 1 IP), S/N 2422
HTTP port 10.10.0.103:80, RTSP port 10.10.0.103:554
17:30:29.7465 2882@ main(): Serial Number: '2422'
17:30:29.7471 2882@ main(): Hardware: Netstream 4C
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x0000097e to mii Register 0x10 (PHY Ctl Reg) ... OK
17:30:29.7765 2882@ ReadMII():
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 mii Register 0x10 (PHY Ctl Reg) = 0x0000097e
17:30:29.7864 2882@ ReadMII():
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 mii Register 0x01 (Phy Status Reg) = 0x0000796d
17:30:29.7964 2882@ ReadMII():
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 mii Register 0x11 (PHY Sts Reg) = 0x0000ad42
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x00000007 to mii Register 0x1f (Page Select Reg) ... OK
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x000000a0 to mii Register 0x1e (Ext Page Sel Reg) ... OK
17:30:29.8263 2882@ ReadMII():
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 mii Register 0x1a (RXC SSC Reg) = 0x00003850
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x00003850 to mii Register 0x1a (RXC SSC Reg) ... OK
****************************************************
* synopGMAC debug Utility for Linux *
* Copyright(c) 2007-2007 Synopsys, Inc *
* Modified 2014 for Elgato Systems by Rolf Bartz *
****************************************************
eth0 write 0x00000000 to mii Register 0x1f (Page Select Reg) ... OK
17:30:29.8472 2882@ ReconfigurePHY(): Eth0 PHY state: up, ready, 1000M, duplex, crossover
17:30:29.8591 2912@ Watchdog_thread_proc(): +++ Watchdog_thread_proc(): Watchdog Thread Started...
Board ID: 1
17:30:29.8612 2882@ main(): adding VixsDevice #1
17:30:29.8621 2882@ CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:30:29.8628 2882@ CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:30:29.8658 2882@ walk_options(): CEVixsDevice: setting verbose output mode
17:30:29.8703 2882@ CEVixsDeviceController::CEVixsDeviceController(): Loading station list from disk ...
17:30:29.8723 2882@ CESATIPStream::Clear(): clearing
17:30:29.8731 2882@ CESATIPStream::Stop(): stopping 0...
17:30:29.8737 2882@ CESATIPStream::Stop(): stopping 0 done.
17:30:29.8745 2882@ CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:30:29.8751 2882@ CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:30:29.8759 2882@ main(): adding VixsDevice #2
17:30:29.8766 2882@ CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:30:29.8772 2882@ CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:30:29.8797 2882@ CESATIPStream::Clear(): clearing
17:30:29.8804 2882@ CESATIPStream::Stop(): stopping 0...
17:30:29.8811 2882@ CESATIPStream::Stop(): stopping 0 done.
17:30:29.8818 2882@ CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:30:29.8826 2882@ CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:30:29.8832 2882@ main(): adding VixsDevice #3
17:30:29.8847 2882@ CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:30:29.8854 2882@ CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:30:29.8877 2882@ CESATIPStream::Clear(): clearing
17:30:29.8884 2882@ CESATIPStream::Stop(): stopping 0...
17:30:29.8892 2882@ CESATIPStream::Stop(): stopping 0 done.
17:30:29.8898 2882@ CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:30:29.8906 2882@ CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:30:29.8912 2882@ main(): adding VixsDevice #4
17:30:29.8918 2882@ CEVixsDeviceRef::CEVixsDeviceRef(): About to create...
17:30:29.8921 2882@ CEVixsDeviceRef::CEVixsDeviceRef(): Created.
17:30:29.8939 2882@ CESATIPStream::Clear(): clearing
17:30:29.8942 2882@ CESATIPStream::Stop(): stopping 0...
17:30:29.8944 2882@ CESATIPStream::Stop(): stopping 0 done.
17:30:29.8946 2882@ CEVixsDeviceRef::~CEVixsDeviceRef(): About to destruct...
17:30:29.8948 2882@ CEVixsDeviceRef::~CEVixsDeviceRef(): Destructed.
17:30:29.8957 2914@ StaticWorkerThreadEntry(): worker thread running...
17:30:29.9019 2915@ CEplThread::ThreadProc(): ***attaching thread 2915, EPL
17:30:29.9041 2916@ CEplThread::ThreadProc(): ***attaching thread 2916, EPL
17:30:29.9051 2916@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:30:29.9057 2916@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:30:29.9101 2914@ CEplIGMPTracker::Start(): Starting
17:30:29.9108 2914@ CEplIGMPTracker::StartSocket(): Starting on '224.0.0.1'
17:30:29.9121 2916@ walk_options(): VixsHAL: setting verbose output mode
17:30:29.9147 2916@ walk_options(): DVB-C FrontEnd: setting verbose output mode
17:30:29.9156 2916@ I2C_Init(): I2Clib: I2C system clock = 25.000MHz
17:30:29.9163 2916@ I2C_Init(): I2Clib: I2C bus clock = 400kHz
17:30:29.9169 2916@ I2C_Init(): I2Clib: I2C atomic period = 62 sysclocks
17:30:29.9177 2916@ I2C_Init(): I2Clib: I2C bus timeout = 700 sysclocks (11.3 i2cclocks)
17:30:29.9184 2916@ I2C_Init(): I2Clib: I2C read timeout = 3000ms
17:30:29.9192 2916@ I2C_Init(): I2Clib: I2C write timeout = 3000ms
17:30:29.9198 2916@ I2C_Init(): I2Clib: duration warning threshold = 100000us
17:30:29.9205 2916@ DVBC_FE_FrontendInit(): [ZIM1902] Start init first MXL251 ...
17:30:29.9217 2915@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:30:29.9224 2915@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:30:29.9234 2917@ CEplThread::ThreadProc(): ***attaching thread 2917, EPL
17:30:29.9243 2917@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:30:29.9250 2917@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:30:29.9259 2918@ CEplThread::ThreadProc(): ***attaching thread 2918, EPL
17:30:29.9268 2918@ inf \ CEThreadedGenericDevice::ProcessCommands():
17:30:29.9275 2918@ inf CEThreadedGenericDevice::ProcessCommands(): CommandThread running
17:30:29.9288 2914@ CEplIGMPTracker::StartSocket(): Starting on '224.0.0.22'
17:30:29.9305 2914@ CEplIGMPTracker::SendGeneralMembershipQuery(): len=36, lenRequested=36
17:30:29.9323 2914@ CEplIGMPTracker::Process(): 10.10.0.103 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
17:30:29.9520 2914@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #1...
17:30:30.3695 2916@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:30:30.3702 2916@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 0.0.0.0-RC0 Bootloader: 0.0.0.0
17:30:30.3710 2916@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Loading Mxl firmware from /lib/firmware/MxL251SF_FW_ES2.mbin ...
17:30:30.3730 2916@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Downloading firmware to Mxl device ...
17:30:31.1621 2914@ CESATIPServer::SetIdle(): waited long enough for frontend 1 (11)
17:30:31.1624 2914@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #1 done.
17:30:31.1721 2914@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #2...
17:30:32.1679 2916@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Firmware was successfully downloaded (status=0)
17:30:32.3816 2914@ CESATIPServer::SetIdle(): waited long enough for frontend 2 (11)
17:30:32.3819 2914@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #2 done.
17:30:32.3916 2914@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #3...
17:30:33.6016 2914@ CESATIPServer::SetIdle(): waited long enough for frontend 3 (11)
17:30:33.6019 2914@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #3 done.
17:30:33.6116 2914@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #4...
17:30:34.1771 2916@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:30:34.1778 2916@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 2.1.5.7-RC1 Bootloader: 0.0.0.9
17:30:34.2276 2916@ DVBC_FE_FrontendInit(): [ZIM1902] End init first MXL251
17:30:34.2282 2916@ DVBC_FE_FrontendInit(): [ZIM1902] Start init second MXL251 ...
17:30:34.3676 2916@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:30:34.3684 2916@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 0.0.0.0-RC0 Bootloader: 0.0.0.0
17:30:34.3691 2916@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Loading Mxl firmware from /lib/firmware/MxL251SF_FW_ES2.mbin ...
17:30:34.3700 2916@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Downloading firmware to Mxl device ...
17:30:34.8216 2914@ CESATIPServer::SetIdle(): waited long enough for frontend 4 (11)
17:30:34.8219 2914@ CESATIPServer::SetIdle(): waiting for all commands to finish for frontend #4 done.
17:30:34.8221 2914@ MyCESATIPServerClient::CESATIPServerClient_IdleMode(): server is idle. Going into low-power mode
17:30:34.8228 2919@ StandbyClock_thread_proc(): +++ StandbyClock_thread_proc(): Standby Clock Thread Started...
17:30:34.9320 2914@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.22' added to multicast list. size() is now 1
17:30:34.9325 2914@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '239.255.255.250' added to multicast list. size() is now 2
17:30:34.9329 2914@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.252' added to multicast list. size() is now 3
17:30:34.9333 2914@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.251' added to multicast list. size() is now 4
17:30:34.9337 2914@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '224.0.0.2' added to multicast list. size() is now 5
17:30:36.1653 2916@ dvbc_fe_FirmwareDownloadCfg(): [ZIM1902] Firmware was successfully downloaded (status=0)
17:30:38.1718 2914@ CESATIPServer::CEplIGMPTrackerClient_HostAdded(): '239.2.0.252' added to multicast list. size() is now 6
17:30:38.1782 2916@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] DevId=2 DevVer=3
17:30:38.1790 2916@ dvbc_fe_DevVersionInfoReq(): [ZIM1902] MxLWare: 2.1.9.4-RC1 Firmware: 2.1.5.7-RC1 Bootloader: 0.0.0.9
17:30:38.2320 2916@ DVBC_FE_FrontendInit(): [ZIM1902] End init second MXL251
17:30:38.2641 2916@ CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:30:38.2648 2916@ CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:30:38.2706 2915@ CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:30:38.2708 2915@ CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:30:38.2784 2917@ CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:30:38.2786 2917@ CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:30:38.2885 2918@ CESATIPServer::CEDeviceCommandFinished(): kCEGenericDevicePropertyTunerTypes are 0x00000004
17:30:38.2888 2918@ CESATIPServer::CEDeviceCommandFinished(): device is DVB-C
17:30:38.2916 2914@ StaticWorkerThreadEntry(): server initialized after 8360ms
Server initialized after 8360ms
17:30:38.2926 2914@ StaticWorkerThreadEntry(): # of DVB-C frontends: 4
17:30:38.2928 2914@ StaticWorkerThreadEntry(): # of DVB-T frontends: 0
17:30:38.2930 2914@ StaticWorkerThreadEntry(): # of DVB-T2 frontends: 0
17:30:38.2932 2914@ StaticWorkerThreadEntry(): # of DVB-S2 frontends: 0
Number of DVB-C frontends: 4
17:30:38.2944 2914@ CEDeviceHTTPServer::Start(): accepting connections
17:30:38.2952 2914@ CEDeviceHTTPServer::Start(): accepting connections
17:30:38.2956 2914@ StaticWorkerThreadEntry(): Server Name 'EyeTV Netstream 4C (2422)'
17:30:38.3045 2914@ CESATIPServer::SetDeviceID(): changing mDeviceID from 1 to 103
17:30:38.3217 2914@ StaticWorkerThreadEntry(): setting RTSP dump to 0 and HTTP dump to 0
17:30:44.9315 2919@ VixsDeviceStandby(): ##### VixsDeviceStandby(1) in #################################################
17:30:44.9319 2919@ VixsDeviceDebug(): g_IDLE_thread_alive = 0, g_IDLE_thread_running = 0
17:30:44.9321 2919@ VixsDeviceDebug(): g_IDLE_thread_started = 0, g_IDLE_thread_stopped = 0
17:30:44.9323 2919@ VixsDeviceDebug(): g_pTaskScheduler.empty = 0, g_pTaskScheduler->empty = 1, g_bTaskValid = 0
17:30:44.9325 2919@ VixsDeviceDebug(): g_bInStandby = 0, g_bStandbyPending = 0
17:30:44.9327 2919@ VixsDeviceDebug(): g_bEnableIdleScan = 0, g_bIdleScanPending = 0, g_bMustAbortScan = 0
17:30:44.9329 2919@ VixsDeviceDebug(): g_bIdleScanStarted = 0, g_bIdleScanFinished = 0, g_iIdleScanProgress = 0
17:30:44.9331 2919@ VixsDeviceDebug(): g_bIdleScanRunning = 0, g_lIdleScanInterval = 604800, default = 604800
17:30:44.9333 2919@ VixsDeviceDebug(): g_LastIdleScanStart = [never] (-1)
17:30:44.9335 2919@ VixsDeviceDebug(): g_LastIdleScanFinish = [never] (-1)
17:30:44.9338 2919@ VixsDeviceDebug(): g_LastIdleScanDuration = [undefined] (-1), Stations Found: 0
17:30:44.9340 2919@ VixsDeviceStandby(): ##### VixsDeviceStandby(1) out ################################################
17:31:01.1920 2914@ CEplIGMPTracker::SendGeneralMembershipQuery(): len=36, lenRequested=36
17:31:01.1929 2914@ CEplIGMPTracker::Process(): 10.10.0.103 -> 224.0.0.1 mc:0.0.0.0 QRV:2 QQIC:125 numSrc:0
TV adapter immediately visible in TVH.