2 x SAT IP Servers ( 2 x XORO SAT>IP Server 8100) and TVHeadEnd server on QNAP NAS

Giuliano G

I have the TVHeadend Server (linuxserver/tvheadend:latest) running in my QNAP NAS in a container (docker) and I have two SAT IP Servers (two XORO SAT>IP Server 8100) in my network which receive the signals from Astra 19E and Hotbird 13E, respectively. Each SAT-IP Server "outputs" 8 Tuners.
The TVHeadend Server sees all 16 tuners (see photo attached). However, I can only find the channels from one of the two satellites (which are mapped on the associated 8 tuners; see photo attached).
Has someone already managed to configure TVHeadend Server in such a way that all channels from both satellites (Astra, Hotbird) can be found?

Saen Acro

https://tvheadend.org/attachments/download/9325/TVAdapters.png

And how tuners are configured
Just 13E is enabled.

Giuliano G

In the screenshot I have enabled only the tuners of Hotbird, you are right.
I have created two networks (one network for Hotbird, enabled on the 8 tuners associated with Hotbird; one network for Astra, enabled on the 8 tuners associated with Astra).
Even if a force a rescan on the network for Astra, nothing happens...
Has someone managed to see channels from two SAT-IP servers with TVHeadend?

Saen Acro

Any DISEQ or non quad/quadro input?

Giuliano G

Each SATIP Server is connected to a TRIAX OPTO QUATRO (see photo attached) and each OPTO QUATRO is connected with an LNB.
I also attach screenshot of my enabled tuners and networks in TVH Server.

Saen Acro

Attach some smaller pictures or use postimages.org

Is your network attached to tuner
Is sat>ip server configuration is correct?

Giuliano G

Do you mean smaller in terms of KB or in terms of extension on the screen?
Yes, both networks (Astra and Hotbird) are attached to the respective tuners (see photo attached).
SATIP Server configuration in TVHH is attached (I guess is correct). SATIP configuration in my two XORO SATIP Servers is also correct (I have tested it without TVHH).

Saen Acro

This is how your pictures look to others

https://i.postimg.cc/d3Mm3nH1/image.png

It's time to learn how to crop images ;)

Sat>ip server is your case is XORO, so get on his interface not in TVH

Don't say, you use predefined frequencies to scan.

Giuliano G

Thank you very much saen, now it works :)
I only followed your advice "Don't say, you use predefined frequencies to scan."

Stefan Aleff

Hi,

i've got the same setting as Giuliano (TVHeadend on Qnap Container and XORO SAT>IP Server 8100), but I have the Problem, that nothing appears in the menu TV-adapters. How can I get the XORO to see on the TVHeadend? Please help. Do I have to add some parameters when I configure the Container?

Saen Acro

Stefan Aleff wrote:
> Hi,
>

> i've got the same setting as Giuliano (TVHeadend on Qnap Container and XORO SAT>IP Server 8100), but I have the Problem, that nothing appears in the menu TV-adapters. How can I get the XORO to see on the TVHeadend? Please help. Do I have to add some parameters when I configure the Container?

Check firewall, also see if sat>ip is enabled in version you have
/about > toggle details/

Jonas Lang

Ensure your tuner is on the same network as your instance of TVH otherwise it won’t be discovered.