Can't use tuners from a SH4 STB

António Mota

Hello to everyone of this fantastic community.

I use TVH for many years, since I discover it when I bought a Wetek Play (Openelec). It was love at first sight, stream to my devices much better in compare with Enigma2.

But unfortunately the wetek tuner (dual sat) burned. so I start search for solution and I found that I can share all tuners tuners from a E2 STB. I have some old boxes that I don't use and so I start my testing.

So I successful send to my TVH Server 3 tuners from 2x DM800HD and 1x DM800SE with minisatip and everything works like a phisical tuner on TVH Server. Fantastic.

But I need your help, I also have a old SH4 STB (Amiko Alien2) and I can't share the 2 sat tuners (the cable one I don't need it).
I tried diferent E2 images with the same results, with minisatip the tuners are detect on TVH Server, make all configs like others stb but the tuner fails.

I also tried different minisatip version, same result. So I try install on SH4 E2 the TVH, both tuners works (local and over ip to the TVH Server) but I only have 1 frame like every 10 seconds. When I start streaming the sh4 CPU jump to 100% all the time, so this CPU many don't have enough performance to use TVH.

Anyone can help me with minisatip to send 2 sat tuners to TVH Server? I guess is only some config, because my others old STB have 1 tuner, I only run minisatip without special config.

Thank you

Saen Acro

https://github.com/Audioniek/buildsystem Need to revert to time before TVH was removed
or compile "SATPI" or "Minisatip"

António Mota

saen acro wrote:
> https://github.com/Audioniek/buildsystem > Need to revert to time before TVH was removed

> or compile "SATPI" or "Minisatip"

Thank you for your time to help me.

I tried 2 Audioniek images with same results, cpu peaks to 100% when start streaming on TVH.
spark7162_Audioniek_enigma2_gst-epl3_flash_P217_CDK-rev1588

spark7162_Audioniek_enigma2_gst-epl3_flash_P217_CDK-rev1608

The minisatip I can install from OpenATV repositories and also I can find the binaries (https://minisatip.org/forum/viewtopic.php?t=371), tuners are detected on TVH Server but fail to use. I see severals commands on minisatip site, maybe this STB need use some special commands to work. In my others MIPS STB I don't need any special command, only run minisatip on each STB.

That SATPI I don't know, I will search. Thank you

Saen Acro

To work minisatip in any case tuner need to be set as unconfigured in other software's.

Audioniek repo need to be before this commit

https://github.com/Audioniek/buildsystem/commit/bd84df1bdea7a5243cdc703e6e31fec45a10e275


$ git clone https://github.com/Audioniek/buildsystem
$ cd buildsystem
$ git reset --hard c0c496228973873fef54d76b1e0addfb69234e7d

And will have some extra menus