DaddyLive, PlutoTV, XUMO, M3U/XMLTV, SamsungTV, Plex, TVGuide interfaces (appliance)

Mark de Leon

Getting Cabernet running in Windows.

Since I had no luck with the Windows exe version of Cabenet, I wanted to post how to make it run from a python command in Windows 10. This may or may not work for Windows 11. This is actually much easier than getting it to run on existing linux installations, that may have issues upgrading python or other dependencies.

You need to install ffmpeg and python.

Here is a good how to for ffmpeg.

https://www.geeksforgeeks.org/how-to-install-ffmpeg-on-windows/

Here is how you can install python. Use the "custom" option. Make sure to check the boxes to install for all users, and to ad environment variables or add to path. .

Ddownload the cabernet code
https://github.com/cabernetwork/cabernet/archive/refs/heads/master.zip

and unzip it. Copy the main folder contents Caberbet[version] to c:\cabernet

you can launch cabernet by putting the following in a batch file, then adding that batch file to the startup folder for all users or a single user. .

C:\Path\to\Python c:\cabernet\tvh_main.py

Once running you need to set the ffmpeg path in "internal > path" for both ffmpeg.exe and ffprobe. If you followed the guide and installed to c:\ffmpeg then you would set the ffmpeg path tp C:\ffmpeg\bin\ffmpeg.exe and the ffprobe path to C:\ffmpeg\bin\ffprobe.exe

This is a much more effective solution for running under windows. No docker, no exe

You should test with firewall disabled but you will need to open at least ports 6077 and 5004 (possibly others?) on Windows firewall.

G Kazaroth

RW, it looks like you are using 2 different IP addresses in the plex log. One for the HDHR interface and the other for a stream. I suspect the 10.6.139.170 address has no access from plex, which is why you are getting a timeout. You can try to change the local_ip from 0.0.0.0 to 192.168.69.111 and see if that works. I do recall in some docker cases, that the IP needs to be bound to a specific IP. After changing the IP in Cabernet, take a look at the lineup.json and see if the IP address has changed.

john tocher

For what it's worth I get better playback using dvr function in Jellyfin. I keep setting it up in Plex and it just does not play as smoothly.

Using Antennas to proxy from TVHeadend.

Cabernet > TVHeadEnd > Antennas > Jellyfin

pretty much everything plays as smoothly as if I were using the TVHeadEnd PVR client with Kodi

Seems like USTVGO is smoother now. I had given up on using it before but with latest Cabernet seems to work better.

R W

After playing around with it I was able to get USTVGO to work again with the VPN but it still missing channels Like VH1 and some others. At least now the ones that it shows do play. I do want to make a note for people in the future that NordVPN seems to play videos from USTVGO but PIA VPN (Private Internet Access) does not work with USTVGO.

Mark de Leon

What are the "recommended Settings" for Xumo TV and PlutoTV instances that will work for TV Viewing without buffering/crashing on commercials?

If you have a response for this, please be complete in your answer. I have been trying to figure it out for too long now. It seems like none of the options make them work. Maybe I just have not hit the right combination?

Thanks

Mark

Mark de Leon

G Kazaroth,

Have you ever seen the Kodi PVR addon for Pluto TV? I refer to the PVR plugin not any of the video addons.

I ask because I had never tried the Pluto TV PVR addon for Kodi until a few days ago.

What I notice is that commercials (mostly non-existent) do not disrupt the video stream at all. There is no flash frame of black several seconds before the commercial starts, none of that. That is to say at least on the channels I tested. What seems to go along with the hacked in commercials is an annoying flash frame of black several seconds before the commercial starts.

My point is that I am sure that tracking down the how and why that PVR addon gets these streams, should not be that difficult. It might be better to incorporate whatever is happening on those links, in Cabernet.

Just a suggestion,

Mark

Mark de Leon

After multiple attempts to Get this running on other PVRs and V4.2 of TVH , none of which seemed to work well. I now have installed to TVH 4.3 built from source on Linux.

This however does not resolve the same issue I had with 4.2 SO I ask the question AGAIN. How do you keep the channel scans from Failing? I have Xumo as a source bu way of Cabernet but only between 20 to 30 channels are "ok" the others are "fail"

I am at my wits end with this and have spent far too long, asked all the questions, and sough the help.

I mean really if TVH does not work then how are people using it? Then again, where are the answers that are complete and succinct? Do people just put up with the shortcomings?

How can Cabernet enhance something that seems so broken? It certainly is not a solution for the failed scanning issue.

Thanks
Mark

mpmc

Mark de Leon wrote:
> After multiple attempts to Get this running on other PVRs and V4.2 of TVH , none of which seemed to work well. I now have installed to TVH 4.3 built from source on Linux.
>
> This however does not resolve the same issue I had with 4.2 SO I ask the question AGAIN. How do you keep the channel scans from Failing? I have Xumo as a source bu way of Cabernet but only between 20 to 30 channels are "ok" the others are "fail"
>
> I am at my wits end with this and have spent far too long, asked all the questions, and sough the help.
>
> I mean really if TVH does not work then how are people using it? Then again, where are the answers that are complete and succinct? Do people just put up with the shortcomings?
>
> How can Cabernet enhance something that seems so broken? It certainly is not a solution for the failed scanning issue.
>
> Thanks

> Mark

When you create the network have you unticked "Scan after creation" (See screenshot)?

!noscan.png!

john tocher

"Just individually rescan those that failed by setting each mux back to PEND from IDLE."

It literally says this at the top of each page of this thread.

Mark de Leon

Mark Clarksone, Are you saying I SHOULD or SHOULD NOT check that box?

John Tocher, I have tried that as well as documented in TVH and that does not work either, unless there is a step I am missing.

mpmc

Mark de Leon wrote:
> Mark Clarksone, Are you saying I SHOULD or SHOULD NOT check that box?
>
>

> John Tocher, I have tried that as well as documented in TVH and that does not work either, unless there is a step I am missing.

You +SHOULD NOT check that box+

Mark de Leon

Mark Clarkstone wrote:
> Mark de Leon wrote:
> > Mark Clarksone, Are you saying I SHOULD or SHOULD NOT check that box?
> >
> >
> > John Tocher, I have tried that as well as documented in TVH and that does not work either, unless there is a step I am missing.
>

> You +SHOULD NOT check that box+

Yes I have tried Not checking that box too and as I understand it must then initiate a "force Scan" which also fails on most channels.

Adrian Smith

Mark de Leon wrote:

> Yes I have tried Not checking that box too and as I understand it must then initiate a "force Scan" which also fails on most channels.

Mark de Leon - what do you have "Maximum # input streams" set to on your IPTV network? This needs to be the maximum number of concurrent streams that your IPTV provider will let you access. Scans will fail if TVH tries to scan more channels at once than your IPTV provider will allow you to access.

G Kazaroth

Reviewing the notes provided by Mark, it seems like there is no information on what the issue is, all I find is its broke. The issue he is facing is open to any number of issues. Based on what he has stated, the most likely issue is an environmental issue and not one associated with either app. It could be the OS, drivers, driver settings, WIFI, network settings, ISP, etc. Recently, I was over at a friends home and was checking out his environment. He was able to play Netflix, but was having issues with Linux (so some streaming was working). After doing some tests, we determined it was the cable provider's box (modem/router/wifi) was not providing WIFI correctly. He purchased a Netgear AX router and hooked it into the network. No more issues, the data rates increased by 10x and Netflix was running much better. They did not even know that they could have better connectivity.

john tocher

Was going to say similar. The same guy who says: "Then again, where are the answers that are complete and succinct?" Is not bothering to provide anything close to a "complete and succinct" description of the problem.

I almost suggested googling "how to ask smart questions" for the FAQ that ESR maintains. Most of solving a problem (it seems to me) is in a description of the problem.

"Yes I have tried Not checking that box too and as I understand it must then initiate a "force Scan" which also fails on most channels."

It says in the instructions at the top of the page "Some of the channels may fail, but it is faster than having a high setting and waiting for all channels to scan. Just individually rescan those that failed by setting each mux back to PEND from IDLE."

So it's hard to guess about what the problem is but it sounds like PEBKAC.

It's not straightforward to set up anything with tvheadend. It took a while (for me anyway) to figure it out. Many would not have the patience required to figure it out.

Mark de Leon

I have set the number of maximum scans to 1, forced a scan and they still fail

Nobody here should try to make be feel ganged up on or attacked because I did not provide some info that you think I should have. I can not possibly provide ALL the information on ALL of the variations I have tried but this has now dragged on for a month. If you think that in that month I have not tried many different options , you are sadly mistaken.

Asking for any kind of documentation should not be offensive to anyone. Yes, I also believe that documenting a piece of software is perhaps equally as important as writing it. Yes you can put all kinds of variables in the Cabernet config file , but what are the available options? What are the options that should work with Pluto TV or with Xumo? They do not seem to be posted anywhere. I am told to enable PTS/DTS resync but I can also say that if I do that in order for that to work I can not use m3u8redirect as a redirect would bypass any resync done in Cabernet but yet no mention of this anywhere. So what are the WORKING "Resync Type" and "Stream Type" that go along with that? As I see that some of them error out and do not work at all.

Not one person has one time given me a solution that fixes Xumo or Pluto TV , not even with TVHeadend that this is supposed to work with and I have tried V 4.3 and V4.2. The scanning ALWAYS FAILS on most even when set to manually scan and only 1 channel. In fact the problem is NOT Cabernet it is in Fact a TVHeadend problem as it scans with fails with most every source I have tested. Rescanning HUNDREDS of channels Manually even still does not work and is an UNREASONABLE work-around anyway.

I think the scanning in TVHeadend is broken from what I can see. It has been broken for YEARS from what I see on the forums. I have tested most every free or open source PVR for Linux Mac and Windows in the last two months and TVHeadend by far is the WORST for adding channels. I believe it is simply buggy or broken and have posted so elsewhere on these forums. Even the work-arounds offered do not work in TVHeadend. These forums are FULL of posts many un-answered and many people working on the same problems week after week.

I have No problems adding channels with other packages Like NextPVR, TVMosaic, or others. This problem is limited to TVHeadend, so yea go ahead and blame it on some undefined variable , like modem, router, etc that you have no info on.

Do I care what YOU think when you do not ask me for more info rather criticize me for not being a mind reader? Should I have documented every possible setting with its result? I think not . I am simply asking "WHAT DOES WORK?" Not one single answer that is complete

Sorry I am moving on from this, TVHeadend obviously has a lot of issues and by the way it has the most convoluted interface of all the PVRs I have tested.

By the way look at the Pluto TV Kodi Addon and it does not break up on every commercial break. Yea thats right nobody cares

Sorry I am moving on from this. Post what you want about me TVH sucks , and cabernet is undocumented. BTW lovely docs on that horrible generic web site like "Fill in your text here"

Good riddance. I will not respond to more time wasters here.

Tekno M

I had this working running from command line in debian but after installing and removing some other software on the same machine it seems to be failing now.

When I go to get http://IP:6077/channels.m3u in the browser I get:

501 - Server Error

The console on host running the script generates the error:

UNEXPECTED EXCEPTION on GET='stream_url'
Traceback (most recent call last):
File "/cabernet/lib/clients/web_admin.py", line 104, in
elif getrequest.call_url(self, self.content_path):
File "/cabernet/lib/common/decorators.py", line 228, in call_url
self.url2func[_name](_webserver,args, *kwargs)
File "/cabernet/lib/clients/channels/channels.py", line 42, in channels_m3u
webserver.domime_response(200, 'audio/x-mpegurl', get_channels_m3u(
File "/cabernet/lib/clients/channels/channels.py", line 100, in get_channels_m3u
uri = sid_data['json']['stream_url']

KeyError: 'stream_url

Wondering if I removed some dependency while removing software.

Running V 0.9.7.5

Thanks

G Kazaroth

I am so glad to be passed the previous trolling and spinning. Thank you for giving the problem. The issue is the stream_url key is not in the database record for the plugin you wanted to get.

This indicates you have a corrupted database file. You have two choices, either delete the database files from data/db folder or you can go to Data Mgmt and request the "Reset Channel Data" for all plugins. Then you can regenerate the channel data by either going to the schedule data and requesting a channel update or restarting the app.

If you are still having issues, I would look at what is happening during the initial pull of channel data from the provider.

You may also need to determine which plugin data is having the issue. You can use the URLs
http://IP:6077/[pluginname]/channels.m3u or
http://IP:6077/[pluginname]/[instancename]/channels.m3u to pull just the one instance/plugin. Example:
http://IP:6077/plutotv/channels.m3u Instance name is what is found in the config.ini. [plutotv_instance] has a name of "instance".

Tekno M

I only use xumo. No other instances are installed.

deleting or renaming the channels.db database does not work.

Once the database is rebuilt, it just returns to the same error.

Robert Coupee

So I have an issue trying to record from the Popflix channel that is available via SamsungTVPlus (gb.m3u8). I use cabernet via TVHeadend. The program will record for upto an hour and then cabernet will stop the stream. TVHeadend however thinks that the recording goes to completion (see attached screenshot).

I see the following in the cabernet logs:

2022-06-10 09:28:29,713-DEBUG:m3u8_queue Removed https://af4689b464b143c89c08aab63ce4718d.mediatailor.us-east-1.amazonaws.com/v1/segment/04fd913bb278d8775298c26fdca9d9841f37601f/Samsung-gb_Popflix/16f7ff09-7474-43ab-9032-f1eafb7f02e1/2/438670 from play queue 23794
2022-06-10 09:28:29,714-DEBUG:m3u8_queue Removed https://af4689b464b143c89c08aab63ce4718d.mediatailor.us-east-1.amazonaws.com/v1/segment/04fd913bb278d8775298c26fdca9d9841f37601f/Samsung-gb_Popflix/16f7ff09-7474-43ab-9032-f1eafb7f02e1/2/438671 from play queue 23794
2022-06-10 09:28:29,714-DEBUG:m3u8_queue Removed https://signatureentertainment-popflix-1-gb.samsung.wurl.tv/56497864/hls-v2/3000-00005.ts?e=1654850589&st=5baabb968750476720cbcb17bf15d45a from play queue 23794
2022-06-10 09:28:29,716-DEBUG:m3u8_queue Added https://signatureentertainment-popflix-1-gb.samsung.wurl.tv/56497864/hls-v2/3000-00007.ts?e=1654850601&st=edad55f7babbc4f59ff759581447d4eb to play queue 23794
2022-06-10 09:28:29,993-ERROR:m3u8_queue UNEXPECTED EXCEPTION M3U8Queue=('https://signatureentertainment-popflix-1-gb.samsung.wurl.tv/56497864/hls-v2/3000-00006.ts?e=1654850595&st=e30ea9315670e57a2086ac09ff8eb224', datetime.datetime(2022, 6, 10, 8, 28, 11, 790000, tzinfo=datetime.timezone.utc))
Traceback (most recent call last):
File "/home/pi/cabernet/lib/streams/m3u8_queue.py", line 106, in run
self.process_m3u8_item(queue_item)
File "/home/pi/cabernet/lib/streams/m3u8_queue.py", line 249, in process_m3u8_item
PLAY_LIST[uri_dt]['played'] = True
KeyError: ('https://signatureentertainment-popflix-1-gb.samsung.wurl.tv/56497864/hls-v2/3000-00006.ts?e=1654850595&st=e30ea9315670e57a2086ac09ff8eb224', datetime.datetime(2022, 6, 10, 8, 28, 11, 790000, tzinfo=datetime.timezone.utc))

2022-06-10 09:28:31,776-NOTICE:web_tuner Provider Connection Closed, ch_id=GBAJ400045P5

Any ideas what is going on?

Thanks.

« Previous Page Next Page »