Ubuntu 20.04 - Avermedia AverTV Volar HD 2 (TD110) - TvHeanded no see it

Issa Issa

Hello there,

so i got an ubuntu 20.04 LTS and an Avermedia AverTV Volar HD 2 (TD110)

stagiaire@plex:~$ lsusb Bus 002 Device 002: ID 07ca:a110 AVerMedia Technologies, Inc. TD110



stagiaire@plex:~$ dmesg | grep dvb
[   11.022752] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[   11.032427] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[   11.032430] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[   11.035648] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   11.035684] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[   11.036166] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   11.168675] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[   11.513238] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[   11.515017] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[   11.515019] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[   11.515126] usbcore: registered new interface driver dvb_usb_af9035
[   30.917269] audit: type=1400 audit(1599670520.784:39): apparmor="DENIED" operation="open" profile="snap.tvheadend.oscam" name="/dev/dvb/adapter0/demux0" pid=819 comm="oscam" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.167482] audit: type=1400 audit(1599670523.036:43): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.267879] audit: type=1400 audit(1599670523.136:44): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.368166] audit: type=1400 audit(1599670523.236:45): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.468459] audit: type=1400 audit(1599670523.340:46): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.568799] audit: type=1400 audit(1599670523.436:47): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.669062] audit: type=1400 audit(1599670523.540:48): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0

and on TvHeadend i can"'t detect it :

can u help me to make it works on my tvheanded svp

Saen Acro

Wrong command used.
report this:


dmesg |egrep 'frontend|firmware|dvb|usb'

Issa Issa


stagiaire@plex:~$ dmesg |egrep 'frontend|firmware|dvb|usb'
[    0.209770] usbcore: registered new interface driver usbfs
[    0.209778] usbcore: registered new interface driver hub
[    0.209784] usbcore: registered new device driver usb
[    0.262843] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x662 took 32048 usecs
[    0.311477] pci 0000:01:1b.0: quirk_usb_early_handoff+0x0/0x662 took 47408 usecs
[    0.546741] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.547340] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.547894] usb usb1: Product: UHCI Host Controller
[    0.548440] usb usb1: Manufacturer: Linux 5.4.0-45-generic uhci_hcd
[    0.548988] usb usb1: SerialNumber: 0000:00:01.2
[    0.569780] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.570348] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.570970] usb usb2: Product: xHCI Host Controller
[    0.571563] usb usb2: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[    0.572120] usb usb2: SerialNumber: 0000:01:1b.0
[    0.575862] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.576459] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.577083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.577675] usb usb3: Product: xHCI Host Controller
[    0.578281] usb usb3: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[    0.578870] usb usb3: SerialNumber: 0000:01:1b.0
[    1.125051] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    1.281479] usb 1-1: not running at top speed; connect to a high speed hub
[    1.315332] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[    1.315359] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[    1.315380] usb 1-1: Product: QEMU USB Tablet
[    1.315392] usb 1-1: Manufacturer: QEMU
[    1.315402] usb 1-1: SerialNumber: 28754-0000:00:01.2-1
[    1.329389] usbcore: registered new interface driver usbhid
[    1.329410] usbhid: USB HID core driver
[    1.331646] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[    1.331920] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[    1.429094] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[    1.582682] usb 2-1: New USB device found, idVendor=07ca, idProduct=a110, bcdDevice= 2.00
[    1.582732] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.582766] usb 2-1: Product: TD110
[    1.582792] usb 2-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[    1.582822] usb 2-1: SerialNumber: 201107200687
[   11.022752] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[   11.032427] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[   11.032430] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[   11.035648] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   11.035684] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[   11.035686] usb 2-1: media controller created
[   11.036166] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   11.168617] af9033 1-001c: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[   11.168670] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.168675] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[   11.513082] rc rc0: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0
[   11.513238] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[   11.514935] input: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0/input6
[   11.515017] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[   11.515019] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[   11.515126] usbcore: registered new interface driver dvb_usb_af9035
[   30.917269] audit: type=1400 audit(1599670520.784:39): apparmor="DENIED" operation="open" profile="snap.tvheadend.oscam" name="/dev/dvb/adapter0/demux0" pid=819 comm="oscam" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.167482] audit: type=1400 audit(1599670523.036:43): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.267879] audit: type=1400 audit(1599670523.136:44): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.368166] audit: type=1400 audit(1599670523.236:45): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.468459] audit: type=1400 audit(1599670523.340:46): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.568799] audit: type=1400 audit(1599670523.436:47): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0
[   33.669062] audit: type=1400 audit(1599670523.540:48): apparmor="DENIED" operation="open" profile="snap.tvheadend.tvheadend" name="/dev/dvb/adapter0/frontend0" pid=629 comm="tvheadend" requested_mask="wr" denied_mask="wr" fsuid=0 ouid=0

what do u think

Saen Acro

Stop use and delete this stupiditi SNAP
install regular TVH and all wil work.

Issa Issa

hello i removed id :

i compile the Tvheadend :


stagiaire@plex:~$ tvheadend -C
2020-09-10 17:55:17.369 [   INFO] main: Log started
2020-09-10 17:55:17.369 [   INFO] http: Starting HTTP server 0.0.0.0:9981
2020-09-10 17:55:17.369 [   INFO] htsp: Starting HTSP server 0.0.0.0:9982
2020-09-10 17:55:17.522 [   INFO] config: loaded
2020-09-10 17:55:17.523 [   INFO] transcode: 'video' context type registered
2020-09-10 17:55:17.523 [   INFO] transcode: 'audio' context type registered
2020-09-10 17:55:17.523 [   INFO] transcode: '&TVHH264Decoder' decoder helper registered
2020-09-10 17:55:17.524 [   INFO] transcode: '&TVHTHEORADecoder' decoder helper registered
2020-09-10 17:55:17.524 [   INFO] transcode: '&TVHAACDecoder' decoder helper registered
2020-09-10 17:55:17.524 [   INFO] transcode: '&TVHVORBISDecoder' decoder helper registered
2020-09-10 17:55:17.524 [   INFO] transcode: '&TVHOPUSDecoder' decoder helper registered
2020-09-10 17:55:17.524 [   INFO] transcode: '&TVHMPEG2VIDEOEncoder' encoder helper registered
2020-09-10 17:55:17.525 [   INFO] transcode: '&TVHH264Encoder' encoder helper registered
2020-09-10 17:55:17.525 [   INFO] transcode: '&TVHHEVCEncoder' encoder helper registered
2020-09-10 17:55:17.525 [   INFO] transcode: '&TVHAACEncoder' encoder helper registered
2020-09-10 17:55:17.525 [   INFO] codec: 'mpeg2video' encoder registered
2020-09-10 17:55:17.526 [   INFO] codec: 'mp2' encoder registered
2020-09-10 17:55:17.526 [   INFO] codec: 'aac' encoder registered
2020-09-10 17:55:17.526 [   INFO] codec: 'vorbis' encoder registered
2020-09-10 17:55:17.526 [   INFO] codec: 'flac' encoder registered
2020-09-10 17:55:17.527 [   INFO] codec: 'libx264' encoder registered
2020-09-10 17:55:17.527 [   INFO] codec: 'libx265' encoder registered
2020-09-10 17:55:17.527 [   INFO] codec: 'libvpx' encoder registered
2020-09-10 17:55:17.527 [   INFO] codec: 'libvpx-vp9' encoder registered
2020-09-10 17:55:17.527 [   INFO] codec: 'libtheora' encoder registered
2020-09-10 17:55:17.528 [   INFO] codec: 'libvorbis' encoder registered
2020-09-10 17:55:17.528 [   INFO] codec: 'libopus' encoder registered
2020-09-10 17:55:17.528 [   INFO] codec: 'h264_vaapi' encoder registered
2020-09-10 17:55:17.528 [   INFO] codec: 'hevc_vaapi' encoder registered
2020-09-10 17:55:17.528 [   INFO] codec: 'vp8_vaapi' encoder registered
2020-09-10 17:55:17.529 [   INFO] codec: 'vp9_vaapi' encoder registered
2020-09-10 17:55:17.529 [   INFO] codec: 'webtv-h264' codec profile created
2020-09-10 17:55:17.529 [   INFO] codec: 'webtv-vp8' codec profile created
2020-09-10 17:55:17.529 [   INFO] codec: 'webtv-aac' codec profile created
2020-09-10 17:55:17.530 [   INFO] codec: 'webtv-vorbis' codec profile created
2020-09-10 17:55:17.530 [   INFO] config: scanfile (re)initialization with path <none>
2020-09-10 17:55:17.531 [   INFO] descrambler: adding CAID 2600/FFFF as ConstCW interval 10000ms pc 20 ep default (BISS)
2020-09-10 17:55:17.531 [   INFO] descrambler: adding CAID 0E00/FFFF as MultiPID interval 1000ms pc 2 ep default (PowerVu)
2020-09-10 17:55:17.532 [   INFO] iptv: Using 2 input thread(s)
2020-09-10 17:55:17.628 [   INFO] scanfile: DVB-S - loaded 1 regions with 115 networks
2020-09-10 17:55:17.628 [   INFO] scanfile: DVB-T - loaded 44 regions with 1120 networks
2020-09-10 17:55:17.629 [   INFO] scanfile: DVB-C - loaded 19 regions with 63 networks
2020-09-10 17:55:17.629 [   INFO] scanfile: ATSC-T - loaded 2 regions with 12 networks
2020-09-10 17:55:17.629 [   INFO] scanfile: ATSC-C - loaded 1 regions with 5 networks
2020-09-10 17:55:17.630 [   INFO] scanfile: ISDB-T - loaded 2 regions with 1297 networks
2020-09-10 17:55:19.536 [   INFO] dvr: Creating new configuration ''
2020-09-10 17:55:19.536 [WARNING] access: Created default wide open access controle entry
2020-09-10 17:55:19.537 [   INFO] epggrab: module uk_freesat created
2020-09-10 17:55:19.537 [   INFO] epggrab: module uk_freesat_eit created
2020-09-10 17:55:19.538 [   INFO] epggrab: module uk_freeview created
2020-09-10 17:55:19.538 [   INFO] epggrab: module nz_freeview2 created
2020-09-10 17:55:19.538 [   INFO] epggrab: module nz_freeview1 created
2020-09-10 17:55:19.538 [   INFO] epggrab: module viasat_baltic created
2020-09-10 17:55:19.539 [   INFO] epggrab: module Bulsatcom_39E created
2020-09-10 17:55:19.539 [   INFO] epggrab: module uk_cable_virgin created
2020-09-10 17:55:19.539 [   INFO] epggrab: module eit created
2020-09-10 17:55:19.539 [   INFO] epggrab: module psip created
2020-09-10 17:55:19.541 [   INFO] epggrab: module opentv-skyuk created
2020-09-10 17:55:19.542 [   INFO] epggrab: module opentv-ausat created
2020-09-10 17:55:19.542 [   INFO] epggrab: module opentv-skynz created
2020-09-10 17:55:19.542 [   INFO] epggrab: module opentv-skyit created
2020-09-10 17:55:19.543 [   INFO] epggrab: module xmltv created
2020-09-10 17:55:19.545 [   INFO] tbl-eit: module eit - scraper disabled by config
2020-09-10 17:55:19.546 [   INFO] epgdb: gzip format detected, inflating (ratio 138.6% deflated size 79)
2020-09-10 17:55:19.546 [   INFO] epgdb: parsing 57 bytes
2020-09-10 17:55:19.546 [   INFO] epgdb: loaded v3
2020-09-10 17:55:19.547 [   INFO] epgdb:   config     1
2020-09-10 17:55:19.547 [   INFO] epgdb:   broadcasts 0
2020-09-10 17:55:19.547 [   INFO] dvr: Purging obsolete autorec entries for current schedule
2020-09-10 17:55:19.547 [ NOTICE] START: HTS Tvheadend version 4.3-1896~gce0907705 started, running as PID:28541 UID:1000 GID:1000, CWD:/home/stagiaire CNF:/home/stagiaire/.hts/tvheadend

so when i connect i still no card detected



stagiaire@plex:~$ dmesg |egrep 'frontend|firmware|dvb|usb'
[    0.302862] usbcore: registered new interface driver usbfs
[    0.303118] usbcore: registered new interface driver hub
[    0.303366] usbcore: registered new device driver usb
[    0.373458] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x662 took 31380 usecs
[    0.422589] pci 0000:01:1b.0: quirk_usb_early_handoff+0x0/0x662 took 47190 usecs
[    0.661870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.662272] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.662645] usb usb1: Product: UHCI Host Controller
[    0.662908] usb usb1: Manufacturer: Linux 5.4.0-47-generic uhci_hcd
[    0.663186] usb usb1: SerialNumber: 0000:00:01.2
[    0.681878] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.682248] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.682652] usb usb2: Product: xHCI Host Controller
[    0.682877] usb usb2: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
[    0.683139] usb usb2: SerialNumber: 0000:01:1b.0
[    0.685031] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.685443] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.685836] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.686173] usb usb3: Product: xHCI Host Controller
[    0.686398] usb usb3: Manufacturer: Linux 5.4.0-47-generic xhci-hcd
[    0.686713] usb usb3: SerialNumber: 0000:01:1b.0
[    1.236112] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    1.392918] usb 1-1: not running at top speed; connect to a high speed hub
[    1.426031] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[    1.426059] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[    1.426076] usb 1-1: Product: QEMU USB Tablet
[    1.426087] usb 1-1: Manufacturer: QEMU
[    1.426098] usb 1-1: SerialNumber: 28754-0000:00:01.2-1
[    1.440155] usbcore: registered new interface driver usbhid
[    1.440173] usbhid: USB HID core driver
[    1.442402] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[    1.442649] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[    1.520139] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[    1.674024] usb 2-1: New USB device found, idVendor=07ca, idProduct=a110, bcdDevice= 2.00
[    1.674050] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.674067] usb 2-1: Product: TD110
[    1.674077] usb 2-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[    1.674093] usb 2-1: SerialNumber: 201107200687
[   11.509388] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[   11.518442] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[   11.518445] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[   11.518983] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   11.518997] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[   11.518999] usb 2-1: media controller created
[   11.519442] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   11.612239] af9033 1-001c: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[   11.612255] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   11.612264] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[   11.788434] rc rc0: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0
[   11.788527] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[   11.788610] input: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0/input6
[   11.788683] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[   11.788686] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[   11.788760] usbcore: registered new interface driver dvb_usb_af9035

stagiaire@plex:~$ lsusb Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 07ca:a110 AVerMedia Technologies, Inc. TD110 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd QEMU USB Tablet Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Issa Issa

Hello there, please need u help

so i got tvheadend installed and worksn but he can see my USb TV TNT key :


i see it on command line :

look this command :



stagiaire@plex:~$ dmesg |egrep 'frontend|firmware|dvb|usb'
[    0.210952] usbcore: registered new interface driver usbfs
[    0.210961] usbcore: registered new interface driver hub
[    0.210967] usbcore: registered new device driver usb
[    0.264056] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x662 took 31653 usecs
[    0.313078] pci 0000:01:1b.0: quirk_usb_early_handoff+0x0/0x662 took 47785 usecs
[    0.566542] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.567105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.567661] usb usb1: Product: UHCI Host Controller
[    0.568249] usb usb1: Manufacturer: Linux 5.4.0-45-generic uhci_hcd
[    0.568799] usb usb1: SerialNumber: 0000:00:01.2
[    0.589526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.590095] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.590654] usb usb2: Product: xHCI Host Controller
[    0.591208] usb usb2: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[    0.591765] usb usb2: SerialNumber: 0000:01:1b.0
[    0.595467] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.596104] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.596698] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.597291] usb usb3: Product: xHCI Host Controller
[    0.597887] usb usb3: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[    0.598476] usb usb3: SerialNumber: 0000:01:1b.0
[    1.141568] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    1.298705] usb 1-1: not running at top speed; connect to a high speed hub
[    1.331059] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[    1.331088] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[    1.331108] usb 1-1: Product: QEMU USB Tablet
[    1.331121] usb 1-1: Manufacturer: QEMU
[    1.331132] usb 1-1: SerialNumber: 28754-0000:00:01.2-1
[    1.344870] usbcore: registered new interface driver usbhid
[    1.344887] usbhid: USB HID core driver
[    1.346987] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[    1.347175] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[    1.437589] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[    1.591379] usb 2-1: New USB device found, idVendor=07ca, idProduct=a110, bcdDevice= 2.00
[    1.591408] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.591428] usb 2-1: Product: TD110
[    1.591438] usb 2-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[    1.591462] usb 2-1: SerialNumber: 201107200687
[   10.436763] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[   10.445630] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[   10.445632] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[   10.446183] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   10.446222] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[   10.446224] usb 2-1: media controller created
[   10.446724] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   10.489108] af9033 1-001c: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[   10.489123] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   10.489126] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[   10.609628] rc rc0: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0
[   10.609677] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[   10.609703] input: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0/input6
[   10.609932] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[   10.609934] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[   10.609957] usbcore: registered new interface driver dvb_usb_af9035
[   28.199084] usb 2-1: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)

but on TvHeadend still nothing, can help me to found why please :

image joint

thanks all

Issa Issa

Hello there, please need u help

so i got tvheadend installed and worksn but he can see my USb TV TNT key :


i see it on command line :

look this command :



stagiaire@plex:~$ dmesg |egrep 'frontend|firmware|dvb|usb'
[    0.210952] usbcore: registered new interface driver usbfs
[    0.210961] usbcore: registered new interface driver hub
[    0.210967] usbcore: registered new device driver usb
[    0.264056] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x662 took 31653 usecs
[    0.313078] pci 0000:01:1b.0: quirk_usb_early_handoff+0x0/0x662 took 47785 usecs
[    0.566542] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[    0.567105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.567661] usb usb1: Product: UHCI Host Controller
[    0.568249] usb usb1: Manufacturer: Linux 5.4.0-45-generic uhci_hcd
[    0.568799] usb usb1: SerialNumber: 0000:00:01.2
[    0.589526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.590095] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.590654] usb usb2: Product: xHCI Host Controller
[    0.591208] usb usb2: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[    0.591765] usb usb2: SerialNumber: 0000:01:1b.0
[    0.595467] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.596104] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.596698] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.597291] usb usb3: Product: xHCI Host Controller
[    0.597887] usb usb3: Manufacturer: Linux 5.4.0-45-generic xhci-hcd
[    0.598476] usb usb3: SerialNumber: 0000:01:1b.0
[    1.141568] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    1.298705] usb 1-1: not running at top speed; connect to a high speed hub
[    1.331059] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00
[    1.331088] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10
[    1.331108] usb 1-1: Product: QEMU USB Tablet
[    1.331121] usb 1-1: Manufacturer: QEMU
[    1.331132] usb 1-1: SerialNumber: 28754-0000:00:01.2-1
[    1.344870] usbcore: registered new interface driver usbhid
[    1.344887] usbhid: USB HID core driver
[    1.346987] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input5
[    1.347175] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[    1.437589] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[    1.591379] usb 2-1: New USB device found, idVendor=07ca, idProduct=a110, bcdDevice= 2.00
[    1.591408] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.591428] usb 2-1: Product: TD110
[    1.591438] usb 2-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[    1.591462] usb 2-1: SerialNumber: 201107200687
[   10.436763] dvb_usb_af9035 2-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[   10.445630] usb 2-1: dvb_usb_v2: found a 'Avermedia AverTV Volar HD 2 (TD110)' in warm state
[   10.445632] dvb_usb_af9035 2-1:1.0: [0] overriding tuner from 38 to 60
[   10.446183] usb 2-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[   10.446222] dvbdev: DVB: registering new adapter (Avermedia AverTV Volar HD 2 (TD110))
[   10.446224] usb 2-1: media controller created
[   10.446724] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   10.489108] af9033 1-001c: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[   10.489123] usb 2-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[   10.489126] dvbdev: dvb_create_media_entity: media entity 'Afatech AF9033 (DVB-T)' registered.
[   10.609628] rc rc0: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0
[   10.609677] rc rc0: lirc_dev: driver dvb_usb_af9035 registered at minor = 0, scancode receiver, no transmitter
[   10.609703] input: Avermedia AverTV Volar HD 2 (TD110) as /devices/pci0000:00/0000:00:1e.0/0000:01:1b.0/usb2/2-1/rc/rc0/input6
[   10.609932] usb 2-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[   10.609934] usb 2-1: dvb_usb_v2: 'Avermedia AverTV Volar HD 2 (TD110)' successfully initialized and connected
[   10.609957] usbcore: registered new interface driver dvb_usb_af9035
[   28.199084] usb 2-1: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)

but on TvHeadend still nothing, can help me to found why please :

image joint

but still no channel found on tvheadend :'(

thanks all

Saen Acro

Let's see is it work

dvb-fe-tool -a 0 -f 0 -m -v

Then let's see if it's occupied by someone else

lsof /dev/dvb/adapter0/frontend0

Issa Issa

Hello, so i god news :

now the key can see on the tvheadend interface :
Capture 1 : Can see the key on TVHEADEND interface
Capture 2 : can see the network parameter
Capture 3 : The muxes are all failed

Capture 4 : can see status on tv headend interface :

tje resit pf command :



stagiaire@plex:~$ sudo dvb-fe-tool -a 0 -f 0 -m -v
Device Afatech AF9033 (DVB-T) (/dev/dvb/adapter0/frontend0) capabilities:
     CAN_FEC_1_2
     CAN_FEC_2_3
     CAN_FEC_3_4
     CAN_FEC_5_6
     CAN_FEC_7_8
     CAN_FEC_AUTO
     CAN_GUARD_INTERVAL_AUTO
     CAN_HIERARCHY_AUTO
     CAN_INVERSION_AUTO
     CAN_MUTE_TS
     CAN_QAM_16
     CAN_QAM_64
     CAN_QAM_AUTO
     CAN_QPSK
     CAN_RECOVER
     CAN_TRANSMISSION_MODE_AUTO
DVB API Version 5.11, Current v5 delivery system: DVBT
Supported delivery system:
    [DVBT]
Frequency range for the current standard:
From:             174 MHz
To:               862 MHz
Step:             250 kHz
RF     (0x01) Quality= Poor Signal= -79.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3


       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF     (0x01) Quality= Poor Signal= -59.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF     (0x01) Quality= Poor Signal= -59.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF     (0x01) Quality= Poor Signal= -75.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF     (0x01) Quality= Poor Signal= -75.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF     (0x01) Quality= Poor Signal= -62.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
RF     (0x01) Quality= Poor Signal= -79.00dBm UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
       (0x00) Quality= Poor UCB= 2655 postBER= 236x10^-6 PER= 2.71x10^-3
Got parameters for DVBT:
FREQUENCY = 618000000
MODULATION = QAM/64
BANDWIDTH_HZ = 8000000
INVERSION = AUTO
CODE_RATE_HP = 3/4
CODE_RATE_LP = 1/2
GUARD_INTERVAL = 1/8
TRANSMISSION_MODE = 8K
HIERARCHY = NONE
DELIVERY_SYSTEM = DVBT
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 0.01dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.40dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.37dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.45dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.21dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.24dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.57dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.46dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.38dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.07dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.48dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.38dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.42dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.43dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.17dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.27dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.34dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.35dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.40dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.30dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.66dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.36dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.41dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.12dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.22dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.36dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.45dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.37dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.14dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.20dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.29dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.41dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.23dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.43dB UCB= 2655 postBER= 0 PER= 0
Lock   (0x1f) Quality= Good Signal= -42.00dBm C/N= 33.33dB UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
RF     (0x01) Quality= Good Signal= -86.00dBm UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
RF     (0x01) Quality= Good Signal= -80.00dBm UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
RF     (0x01) Quality= Good Signal= -86.00dBm UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0
       (0x00) Quality= Good UCB= 2655 postBER= 0 PER= 0

the second command :

stagiaire@plex:~$ lsof /dev/dvb/adapter0/frontend0 stagiaire@plex:~$ lsof /dev/dvb/adapter0/frontend0 stagiaire@plex:~$

Saen Acro

Your signal is too worst


# dvb-fe-tool -a 0 -f 0 -m -v
Device DiBcom 3000MC/P (/dev/dvb/adapter0/frontend0) capabilities:
     CAN_FEC_1_2
     CAN_FEC_2_3
     CAN_FEC_3_4
     CAN_FEC_5_6
     CAN_FEC_7_8
     CAN_FEC_AUTO
     CAN_GUARD_INTERVAL_AUTO
     CAN_HIERARCHY_AUTO
     CAN_INVERSION_AUTO
     CAN_QAM_16
     CAN_QAM_64
     CAN_QAM_AUTO
     CAN_QPSK
     CAN_RECOVER
     CAN_TRANSMISSION_MODE_AUTO
DVB API Version 5.11, Current v5 delivery system: DVBT
Supported delivery system:
    [DVBT]
Got parameters for DVBT:
FREQUENCY = 626000000
MODULATION = QAM/64
BANDWIDTH_HZ = 8000000
INVERSION = AUTO
CODE_RATE_HP = 2/3
CODE_RATE_LP = 1/2
GUARD_INTERVAL = 1/4
TRANSMISSION_MODE = 8K
HIERARCHY = NONE
DELIVERY_SYSTEM = DVBT
Lock   (0x1f) Signal= 69,27% C/N= 0,00% UCB= 0 postBER= 0
Lock   (0x1f) Signal= 69,43% C/N= 0,00% UCB= 0 postBER= 0
Lock   (0x1f) Signal= 69,23% C/N= 0,00% UCB= 0 postBER= 0
Lock   (0x1f) Signal= 69,41% C/N= 0,00% UCB= 0 postBER= 0
Lock   (0x1f) Signal= 69,48% C/N= 0,00% UCB= 0 postBER= 0
Lock   (0x1f) Signal= 70,31% C/N= 0,00% UCB= 0 postBER= 0
Lock   (0x1f) Signal= 69,05% C/N= 0,00% UCB= 0 postBER= 0

same can be seen withfemon


# femon
FE: DiBcom 3000MC/P (DVBT)
status SCVYL | signal b1bc | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal b1d2 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal b226 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal b08c | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status SCVYL | signal b084 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
^C

# femon -H
FE: DiBcom 3000MC/P (DVBT)
status SCVYL | signal  69% | snr   0% | ber 0 | unc 0 | FE_HAS_LOCK
status SCVYL | signal  68% | snr   0% | ber 0 | unc 0 | FE_HAS_LOCK
status SCVYL | signal  69% | snr   0% | ber 0 | unc 0 | FE_HAS_LOCK
status SCVYL | signal  69% | snr   0% | ber 0 | unc 0 | FE_HAS_LOCK

Issa Issa

Hello

so i found my problem, i m not using the good keys

the Avermedia AverTV Volar HD 2 (TD110) is not working on linux, the good one is the : AVerMedia Technologies, Inc. AVerTV Volar Green HD (A835B)

and now works :)

well well well

thanks u all for u help :)