Hi,
Can anyone recommend any tips on setting up HDStar v3 on raspberry pi please. I've read conflicting information so I'm not sure what is true now.
I'm running, stretch/ raspbian Linux raspberrypi 4.19.30-v7+ #1209.
This is my Dmesg:
[ 5.304826] Invalid probe, probably not a DS3000
[ 5.304858] dvb-usb: no frontend was attached by 'SU3000HD DVB-S USB2.0'
[ 5.305161] Registered IR keymap rc-su3000
[ 5.305378] rc rc0: SU3000HD DVB-S USB2.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/rc/rc0
[ 5.305769] input: SU3000HD DVB-S USB2.0 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/rc/rc0/input0
[ 5.306104] rc rc0: lirc_dev: driver dw2102 registered at minor = 0, scancode receiver, no transmitter
[ 5.306115] dvb-usb: schedule remote query interval to 150 msecs.
[ 5.306129] dw2102: su3000_power_ctrl: 0, initialized 1
[ 5.306136] dvb-usb: SU3000HD DVB-S USB2.0 successfully initialized and connected.
[ 5.306369] usbcore: registered new interface driver dw2102
I've installed and compiled the latest media build. If I run lsdvb it reports no devices. Nothing appears in the tvheadend web site either.
I've managed to get this setup fine on my Ubuntu 18.04 device using the same method. Any tips?
Many thanks!!!
Steve