Hello everyone,
I'm trying to install new TVheadend instance with DVBSky S952 DVB-S2 PCIe card on Ubuntu 16.04 LTS. Unfortunately without success.
To install the card I'm used procedure from below webiste:
http://www.dvbsky.net/download/doc/Linux_driver_installation_Guide
during compile the source code: "make", I see some errors
scripts/Makefile.build:316: recipe for target '/home/media_build-bst-160430/v4l/msp3400-driver.o' failed
make[3]: *** [/home/jumphost/media_build-bst-160430/v4l/msp3400-driver.o] Error 1
Makefile:1550: recipe for target '_module_/home/media_build-bst-160430/v4l' failed
make[2]: *** [_module_/home/jumphost/media_build-bst-160430/v4l] Error 2
make[2]: Leaving directory '/usr/src/linux-headers-4.13.0-39-generic'
Makefile:51: recipe for target 'default' failed
make[1]: *** [default] Error 2
make[1]: Leaving directory '/home/jumphost/media_build-bst-160430/v4l'
Makefile:26: recipe for target 'all' failed
make: *** [all] Error 2
I've no idea what is wrong
dmesg | grep -i dvb
root@jumphost:/home/jumphost/media_build-bst-160430# dmesg | grep -i dvb
[ 21.427384] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
[ 21.427385] cx23885: cx23885[0]: cx23885 based dvb card
[ 21.692092] cx23885: cx23885_dvb_register() dvb_register failed err = -22
[ 21.692094] cx23885: cx23885_dev_setup() Failed to register dvb on VID_C
dmesg | grep -i firmware
root@jumphost:/home/jumphost/media_build-bst-160430# dmesg | grep -i firmware
[ 0.069510] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.073346] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 21.398867] cx25840 12-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 22.221581] usb 2-1.1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
lspci -vvvnn
Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: DVBSky S952 [4254:0952]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fb800000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32+ WRR64+ WRR128-
Ctrl: ArbSelect=WRR64
Status: InProgress-
Port Arbitration Table [240] <?>
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Kernel driver in use: cx23885
Kernel modules: cx23885