Sat>IP and DVB-T

Sebastien Pim

Hello,

I'm quite new to Tvheadend. I'm running it on my Synology NAS. The version installed is 4.4.20180311-1
I've attached a DVB-T tuner and it's running well. I can watch the channels on my nvidia shield running Kodi or on my android phone.

I'm now trying to setup the Sat>IP server. Tvheadend should be the server and my Panasonic TV should be the client.

My Sat>IP options look like this :

https://image.ibb.co/fQUocH/Capture_du_2018_04_11_16_42_30.png

However if I use the SAT>IP app on android, I see that the server is detected as a DVB-S tuner. The app then tries to scan Astra or any other satellite. I don't have any DVB-S tuner attached to tvheadend as I can catch more then 50 channels in DVB-T here :-)

Here is a screenshot of the app :

https://image.ibb.co/jBO0Px/Screenshot_20180411_164328.jpg

Finally on my Panasonic TV, TVheadend is detected but same behaviour, the tv tries to scan a sat position

Screenshot :

https://image.ibb.co/i3ZbWc/Sans_titre.png

Translation : Number of sat tuner : no information
Number of DVB-C tuner : no information

Number of DVB-T tuner : no information

Am I missing somthing in order to make tvheadend work as a DVB-T Sat>ip server ? Or is it just impossible
Thank you

Saen Acro

Switch "Default view level" toexpert, and test other options.

Sebastien Pim

Thanks for the answer.
I've already looked into the expert options but I don't see any other option that could fix the problem

Saen Acro

Try with "ProgTV"