@Chris in every forum they say with setting of LNB:
Lo - 10750
high - 10750
switch - 10750
with this setting work, this setting for TVH are 'Ku 10750 (Hi-Band)' ,but you now say me i test don't work ,but in previus post say setting:
Lo - 10750
high - 10750
switch -0
where is same, again will not work now say me "suffer from drift due to the climate here" , ohh man change LNB with normal good working LNB and try again, , you say me due climate and what you want to say me in every hour you must change LNB setting :D, and every information from you must get hard and guess what you have and what setting must use, every post information from you must be with Divination.
When want 'custom' setting of LNB change code here: https://github.com/tvheadend/tvheadend/blob/master/src/input/mpegts/linuxdvb/linuxdvb_lnb.c#L212-L408 and set what you want for you UFO LNB.
Note:
Change this:
{
.ld_type = "Ku 10750 (Hi-Band)",
.ld_tune = linuxdvb_lnb_standard_tune,
},
.lnb_freq = linuxdvb_lnb_standard_freq,
.lnb_match = linuxdvb_lnb_standard_match,
.lnb_band = linuxdvb_lnb_standard_band,
.lnb_pol = linuxdvb_lnb_standard_pol,
},
.lnb_low = 10750000,
.lnb_high = 10750000,
.lnb_switch = 10750000,
},
with your UFo setting how you see "Ku 10750 (Hi-Band)" use
.lnb_low = 10750000,
.lnb_high = 10750000,
.lnb_switch = 10750000,
three ssetting of LNB use 10750, change with your Ufo setting and compile TVH.