SAT>IP Server Tutorial needed

Matej Munih · 2017-06-15T08:54:08+00:00

Hello, I am trying to setup the SAT>IP server which is built in tvheadend. I am running the latest version on Ubuntu 16.04. I am trying to set the port t...

Svinya Dolna

Did you try quitting any anti-virus and/or monitoring programs you might have running? What about turning off the firewall?

Robert Cameron

Matej Munih wrote:
> UP
>
> I amstill not able to run the SAT>IP server on554 port.
>
> Furthermore,Elgato Sat>ip app is showing me an error "autoscan error:1" when I am trying to scan for channels.
>
> AlsoProgTV app is making tvheadend to make "connection refused" errors and I cannot scan for channels.
>

> How can I make the SAT>IP SERVER working????

Only root can open connections on ports below 1000. As you've previously stated, you're running as hts, not root. Run as root, or point your Sat>IP clients to 9983 instead of 554.

Svinya Dolna

That's not possible (for me) on a Panasonic client.

Robert Cameron

Svinya Dolna wrote:

> That's not possible (for me) on a Panasonic client.

Then run your Tvheadend install as root, so you can use lower port numbers. You should also be able to pass "-u" option to Tvheadend so that it will drop to a lower privileged user, but allowing the initial port binding to occur still.

Saen Acro

When TVHeadend is installed from package installer with all permissions correct
and started by System not by command line all work perfect port 554 is OK.
Dirty configuration is not good.

luis chavez

any update in the project i have my own project sat > ip and i have some issues

Svinya Dolna

Starting from System does work indeed. TVH streamed DVB-T stick to DVB-IP client on the TV, with no apparent problems.

Me Mine

Hello all. I have been unsuccessful in getting a working RTSP stream out of TVHeadend. Can someone tell me the proper formatting of the URL. Secondly, I should be able to verify the RTSP Stream in VLC? Thank you in advance.

Robert Cameron

Me Mine wrote:

> Hello all. I have been unsuccessful in getting a working RTSP stream out of TVHeadend. Can someone tell me the proper formatting of the URL. Secondly, I should be able to verify the RTSP Stream in VLC? Thank you in advance.

I'm not sure that Tvheadend has a full RTSP server. It does supportsome RTSP functionality, but that is a side-effect of it being a Sat>IP server/client, which uses parts of RTSP for its own implementation.

Me Mine

Ok. Thanks for the response. Makes sense :-)

luis chavez

i have an AMD A10 with 8g of ram and i want to make transcoding to 36 channels can i compress all the 36 channels with that procesor??

i wanna compress in x265 but i dont know how to do it in tvheadend an use the 8 core who can help me with that please!!

i use ubuntu server 16.4.03, tvheadend 4.3-358~g99d191a46 from mamarley nightly, and dvb-s2

« Previous Page