Eric Deacon wrote:
> I have a similar issue.
>
> I'm having an issue with Mygica T230C2 DVB-T/T2/C. It works on Windows, but I can't get it working properly on Linux.
>
> dmesg | grep -i c68a
>
> [ 279.210126] usb 2-1: New USB device found, idVendor=0572, idProduct=*c68a*
>
> dmesg | grep dvb
>
> [ 279.731486] dvb-usb: found a 'Mygica T230C2 DVB-T/T2/C' in warm state.
> [ 279.971550] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
> [ 279.973374] dvbdev: DVB: registering new adapter (Mygica T230C2 DVB-T/T2/C)
> [ 279.976317] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
> [ 280.192534] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
> [ 280.263440] dvb-usb: schedule remote query interval to 100 msecs.
> [ 280.263925] dvb-usb: Mygica T230C2 DVB-T/T2/C successfully initialized and connected.
> [ 280.263985] usbcore: registered new interface driver dvb_usb_cxusb
> [ 280.644407] si2168 0-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
>
> There should be something found at 738000 kHz and 770000 kHz, but I get:
>
> w_scan -x
>
> tune to: QAM_AUTO f = 738000 kHz I999B8C0D0T32G16Y0P0 (8902:12289:1) (time: 03:54.978)
> ----------no signal----------
> tune to: QAM_AUTO f = 738000 kHz I999B8C999D0T999G999Y0P0 (8902:12289:1) (time: 04:01.002) ( no signal)
> ----------no signal----------
> tune to: QAM_AUTO f = 770000 kHz I999B8C0D0T32G16Y0P1 (8902:12289:12) (time: 04:07.082)
> ----------no signal----------
> tune to: QAM_AUTO f = 770000 kHz I999B8C999D0T999G999Y0P1 (8902:12289:12) (time: 04:13.213) (no signal)
> ----------no signal----------
> tune to: QAM_AUTO f = 770000 kHz I999B8C999D999T32G16Y999P0 (8902:12289:11) (time: 04:19.291)
> ----------no signal----------
> tune to: QAM_AUTO f = 770000 kHz I999B8C999D999T999G999Y999P0 (8902:12289:11) (time: 04:25.41 1) (no signal)
> ----------no signal----------
>
> ERROR: Sorry - i couldn't get any working frequency/transponder
> Nothing to scan!!
Hi,
I have the same device and vendor IDs, but only get this far:
[ 113.866488] usb 3-3: new high-speed USB device number 8 using xhci_hcd
[ 113.995202] usb 3-3: New USB device found, idVendor=0572, idProduct=c68a
[ 113.995205] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 113.995206] usb 3-3: Product: EyeTV Stick
[ 113.995207] usb 3-3: Manufacturer: Geniatech
[ 113.995208] usb 3-3: SerialNumber: 161206
It seems that dvb-usb is not noticing the device and loading the firmware. I have
dvb-demod-si2168-d60-01.fw
in /lib/firmware, but can't work out how to make the firmware load! Do you have any idea what might cause this? How did you get dvb-usb to find the device?
Thanks,
Alex