Oscam + Tvheadend. Channels won't descramble. Please help.

Peter LB

Hi I'm new to Oscam so hope someone can help me. Have used many hours and it still won't work.

Earlier I was running NewCS on a raspberry pi, but would like to switch to Oscam, since I couldn't decrypt all channels.

I'm running Oscam on a Debian VirtualBox and USB passthrough on my Smargo Smartreader2+ with a Viaccess card, I'm running it up against a TVHeadend, but it wont descramble any channels. TVheadend log is also included.

oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11360

[reader]
label = Ziggo
protocol = mouse
device = /dev/ttyUSB0
pincode = 0000
caid = 0500
detect = cd
mhz = 600
ident = 0500:FFF490,040210,040220,040230,040240
showcls = 4
group = 1

emmcache = 1,3,2,0

oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11360

[account]
user = tvheadend
pwd = tvheadend
caid = 0500
monlevel = 1
au = Ziggo

group = 1

oscam.conf
#
# main configuration

[global]
nice = -1

WaitForCards = 1

# logging

logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log

cwlogdir = /var/log/oscam/cw

# monitor

[monitor]
port = 988
aulow = 120

monlevel = 1

# web interface

[webif]
httpport = 8888
httpuser = xxxxx
httppwd = xxxxx

httpallowed = 127.0.0.1,192.168.1.1-192.168.1.255,::1

# anti-cascading

[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 5
penalty = 1
aclogfile = /var/log/oscam/aclog.log

denysamples = 9

# protocols

[newcamd]
key = 0102030405060708091011121314

port = 10000@0500:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF

Tvheadend:
2017-02-28 14:03:41.322 cwc: Connected to 192.168.1.27:10000
2017-02-28 14:03:44.198 cwc: 192.168.1.27:10000: Connected as user tvheadend to a Viaccess-card [0x0500 : 00.00.00.00.00.00.00.00] with 1 provider
2017-02-28 14:03:44.198 cwc: 192.168.1.27:10000: Provider ID #1: 0x0500:0xffffff 00.00.00.00.00.00.00.00
2017-02-28 14:03:44.198 cwc: 192.168.1.27:10000: Will not forward EMMs (not allowed by server)
2017-02-28 14:04:00.976 mpegts: 188MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #0 (192.168.1.187)
2017-02-28 14:04:00.976 tvhdhomerun: tuning to a8qam64-6875:188000000
2017-02-28 14:04:00.981 subscription: 0033: "epggrab" subscribing to mux "188MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #0 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:04:00.981 mpegts: 506MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #1 (192.168.1.187)
2017-02-28 14:04:00.981 tvhdhomerun: tuning to a8qam64-6875:506000000
2017-02-28 14:04:00.990 subscription: 0034: "epggrab" subscribing to mux "506MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #1 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:04:00.990 mpegts: 143MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #2 (192.168.1.187)
2017-02-28 14:04:00.990 tvhdhomerun: tuning to a8qam64-6875:143000000
2017-02-28 14:04:00.998 subscription: 0035: "epggrab" subscribing to mux "143MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #2 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:04:00.998 mpegts: 514MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #3 (192.168.1.187)
2017-02-28 14:04:00.998 tvhdhomerun: tuning to a8qam64-6875:514000000
2017-02-28 14:04:01.007 subscription: 0036: "epggrab" subscribing to mux "514MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #3 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:14:15.976 epggrab: PSIP: ATSC Grabber - data completion timeout for 188MHz in DVB-C Network
2017-02-28 14:14:15.976 epggrab: EIT: DVB Grabber - data completion timeout for 188MHz in DVB-C Network
2017-02-28 14:14:15.976 subscription: 0033: "epggrab" unsubscribing
2017-02-28 14:14:15.991 epggrab: EIT: DVB Grabber - data completion timeout for 514MHz in DVB-C Network
2017-02-28 14:14:15.991 epggrab: PSIP: ATSC Grabber - data completion timeout for 514MHz in DVB-C Network
2017-02-28 14:14:15.991 subscription: 0036: "epggrab" unsubscribing
2017-02-28 14:14:15.993 epggrab: PSIP: ATSC Grabber - data completion timeout for 143MHz in DVB-C Network
2017-02-28 14:14:15.993 epggrab: EIT: DVB Grabber - data completion timeout for 143MHz in DVB-C Network
2017-02-28 14:14:15.993 subscription: 0035: "epggrab" unsubscribing
2017-02-28 14:14:15.994 epggrab: EIT: DVB Grabber - data completion timeout for 506MHz in DVB-C Network
2017-02-28 14:14:15.994 epggrab: PSIP: ATSC Grabber - data completion timeout for 506MHz in DVB-C Network
2017-02-28 14:14:15.994 subscription: 0034: "epggrab" unsubscribing
2017-02-28 14:14:16.992 mpegts: 570MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #0 (192.168.1.187)
2017-02-28 14:14:16.992 tvhdhomerun: tuning to a8qam64-6875:570000000
2017-02-28 14:14:16.996 subscription: 0038: "epggrab" subscribing to mux "570MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #0 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:14:16.996 mpegts: 546MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #1 (192.168.1.187)
2017-02-28 14:14:16.996 tvhdhomerun: tuning to a8qam64-6875:546000000
2017-02-28 14:14:17.001 subscription: 0039: "epggrab" subscribing to mux "546MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #1 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:14:17.001 mpegts: 530MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #2 (192.168.1.187)
2017-02-28 14:14:17.001 tvhdhomerun: tuning to a8qam64-6875:530000000
2017-02-28 14:14:17.007 subscription: 003A: "epggrab" subscribing to mux "530MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #2 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:14:17.007 mpegts: 458MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #3 (192.168.1.187)
2017-02-28 14:14:17.007 tvhdhomerun: tuning to a8qam64-6875:458000000
2017-02-28 14:14:17.013 subscription: 003B: "epggrab" subscribing to mux "458MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #3 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:24:31.992 epggrab: PSIP: ATSC Grabber - data completion timeout for 458MHz in DVB-C Network
2017-02-28 14:24:31.992 epggrab: EIT: DVB Grabber - data completion timeout for 458MHz in DVB-C Network
2017-02-28 14:24:31.992 subscription: 003B: "epggrab" unsubscribing
2017-02-28 14:24:31.994 epggrab: EIT: DVB Grabber - data completion timeout for 530MHz in DVB-C Network
2017-02-28 14:24:31.994 epggrab: PSIP: ATSC Grabber - data completion timeout for 530MHz in DVB-C Network
2017-02-28 14:24:31.994 subscription: 003A: "epggrab" unsubscribing
2017-02-28 14:24:31.996 epggrab: EIT: DVB Grabber - data completion timeout for 546MHz in DVB-C Network
2017-02-28 14:24:31.996 epggrab: PSIP: ATSC Grabber - data completion timeout for 546MHz in DVB-C Network
2017-02-28 14:24:31.996 subscription: 0039: "epggrab" unsubscribing
2017-02-28 14:24:31.997 epggrab: EIT: DVB Grabber - data completion timeout for 570MHz in DVB-C Network
2017-02-28 14:24:31.997 epggrab: PSIP: ATSC Grabber - data completion timeout for 570MHz in DVB-C Network
2017-02-28 14:24:31.997 subscription: 0038: "epggrab" unsubscribing
2017-02-28 14:24:33.000 mpegts: 578MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #0 (192.168.1.187)
2017-02-28 14:24:33.000 tvhdhomerun: tuning to a8qam64-6875:578000000
2017-02-28 14:24:33.005 subscription: 003D: "epggrab" subscribing to mux "578MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #0 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:24:33.005 mpegts: 602MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #1 (192.168.1.187)
2017-02-28 14:24:33.005 tvhdhomerun: tuning to a8qam64-6875:602000000
2017-02-28 14:24:33.009 subscription: 003E: "epggrab" subscribing to mux "602MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #1 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:24:33.009 mpegts: 538MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #2 (192.168.1.187)
2017-02-28 14:24:33.009 tvhdhomerun: tuning to a8qam64-6875:538000000
2017-02-28 14:24:33.013 subscription: 003F: "epggrab" subscribing to mux "538MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #2 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:24:33.013 mpegts: 586MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #3 (192.168.1.187)
2017-02-28 14:24:33.013 tvhdhomerun: tuning to a8qam64-6875:586000000
2017-02-28 14:24:33.018 subscription: 0040: "epggrab" subscribing to mux "586MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #3 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:34:48.006 epggrab: EIT: DVB Grabber - data completion timeout for 586MHz in DVB-C Network
2017-02-28 14:34:48.006 epggrab: PSIP: ATSC Grabber - data completion timeout for 586MHz in DVB-C Network
2017-02-28 14:34:48.006 subscription: 0040: "epggrab" unsubscribing
2017-02-28 14:34:48.007 epggrab: EIT: DVB Grabber - data completion timeout for 538MHz in DVB-C Network
2017-02-28 14:34:48.007 epggrab: PSIP: ATSC Grabber - data completion timeout for 538MHz in DVB-C Network
2017-02-28 14:34:48.007 subscription: 003F: "epggrab" unsubscribing
2017-02-28 14:34:48.008 epggrab: EIT: DVB Grabber - data completion timeout for 602MHz in DVB-C Network
2017-02-28 14:34:48.008 epggrab: PSIP: ATSC Grabber - data completion timeout for 602MHz in DVB-C Network
2017-02-28 14:34:48.008 subscription: 003E: "epggrab" unsubscribing
2017-02-28 14:34:48.009 epggrab: EIT: DVB Grabber - data completion timeout for 578MHz in DVB-C Network
2017-02-28 14:34:48.009 epggrab: PSIP: ATSC Grabber - data completion timeout for 578MHz in DVB-C Network
2017-02-28 14:34:48.009 subscription: 003D: "epggrab" unsubscribing
2017-02-28 14:34:49.011 mpegts: 196MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #0 (192.168.1.187)
2017-02-28 14:34:49.012 tvhdhomerun: tuning to a8qam64-6875:196000000
2017-02-28 14:34:49.018 subscription: 0042: "epggrab" subscribing to mux "196MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #0 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:34:49.019 mpegts: 498MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #1 (192.168.1.187)
2017-02-28 14:34:49.020 tvhdhomerun: tuning to a8qam64-6875:498000000
2017-02-28 14:34:49.026 subscription: 0043: "epggrab" subscribing to mux "498MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #1 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:34:49.026 mpegts: 594MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #2 (192.168.1.187)
2017-02-28 14:34:49.027 tvhdhomerun: tuning to a8qam64-6875:594000000
2017-02-28 14:34:49.031 subscription: 0044: "epggrab" subscribing to mux "594MHz", weight: 4, adapter: "HDHomeRun DVB-C Tuner #2 (192.168.1.187)", network: "DVB-C Network", service: "Raw PID Subscription"
2017-02-28 14:45:04.020 epggrab: EIT: DVB Grabber - data completion timeout for 594MHz in DVB-C Network
2017-02-28 14:45:04.020 epggrab: PSIP: ATSC Grabber - data completion timeout for 594MHz in DVB-C Network
2017-02-28 14:45:04.020 subscription: 0044: "epggrab" unsubscribing
2017-02-28 14:45:04.023 epggrab: EIT: DVB Grabber - data completion timeout for 498MHz in DVB-C Network
2017-02-28 14:45:04.023 epggrab: PSIP: ATSC Grabber - data completion timeout for 498MHz in DVB-C Network
2017-02-28 14:45:04.023 subscription: 0043: "epggrab" unsubscribing
2017-02-28 14:45:04.025 epggrab: PSIP: ATSC Grabber - data completion timeout for 196MHz in DVB-C Network
2017-02-28 14:45:04.025 epggrab: EIT: DVB Grabber - data completion timeout for 196MHz in DVB-C Network
2017-02-28 14:45:04.025 subscription: 0042: "epggrab" unsubscribing
Loglevel debug: enabled

Loglevel debug: disabled

2017-02-28 15:10:13.586 htsp: xx.xx.xxx.x [ admin | org.tvheadend.tvhclient ]: Disconnected
2017-02-28 15:10:13.653 htsp: Got connection from xx.xx.xxx.x
2017-02-28 15:10:13.662 htsp: xx.xx.xxx.x: Identified as user 'admin' (unverified)
2017-02-28 15:10:13.662 htsp: xx.xx.xxx.x [ admin ]: Welcomed client software: org.tvheadend.tvhclient (HTSPv23)
2017-02-28 15:10:13.692 htsp: xx.xx.xxx.x [ admin | org.tvheadend.tvhclient ]: Identified as user 'admin'
2017-02-28 15:10:13.692 htsp: xx.xx.xxx.x [ admin | org.tvheadend.tvhclient ]: Privileges updated
2017-02-28 15:10:19.597 htsp: xx.xx.xxx.x [ admin | org.tvheadend.tvhclient ]: Disconnected
2017-02-28 15:10:23.572 htsp: Got connection from xx.xx.xxx.x
2017-02-28 15:10:23.585 htsp: xx.xx.xxx.x: Identified as user 'admin' (unverified)
2017-02-28 15:10:23.585 htsp: xx.xx.xxx.x [ admin ]: Welcomed client software: org.tvheadend.tvhclient (HTSPv23)
2017-02-28 15:10:23.612 htsp: xx.xx.xxx.x [ admin | org.tvheadend.tvhclient ]: Identified as user 'admin'
2017-02-28 15:10:23.612 htsp: xx.xx.xxx.x [ admin | org.tvheadend.tvhclient ]: Privileges updated
2017-02-28 15:10:33.725 http: xx.xx.xxx.x: using ticket A62B253DDX316FC289E0BA848F52086XXC055C33F0A for /stream/channelid/985083476
2017-02-28 15:10:33.725 mpegts: 514MHz in DVB-C Network - tuning on HDHomeRun DVB-C Tuner #0 (192.168.1.187)
2017-02-28 15:10:33.725 tvhdhomerun: tuning to a8qam64-6875:514000000
2017-02-28 15:10:33.735 subscription: 0045: "HTTP" subscribing on channel "TV3+", weight: 100, adapter: "HDHomeRun DVB-C Tuner #0 (192.168.1.187)", network: "DVB-C Network", mux: "514MHz", provider: "YouSee", service: "TV3+", profile="pass", hostname=" xx.xx.xxx.x", username="admin", client="Mozilla/5.0 (Linux; Android 6.0.1; da-DK; SM-G935F Build/MMB29K.G935FXXU1BPLB) MXPlayer/1.8.9"
2017-02-28 15:10:36.033 descrambler: cannot decode packets for service "TV3+"
2017-02-28 15:10:46.061 descrambler: cannot decode packets for service "TV3+"
2017-02-28 15:10:56.075 descrambler: cannot decode packets for service "TV3+"

Joe User

What does oscam log show?

Peter LB

Hi the log i have is this. Hope you can help me:

2017/03/01 15:12:30 00000000 s (main) System name = Linux
2017/03/01 15:12:30 00000000 s (main) Host name = PlexServer
2017/03/01 15:12:30 00000000 s (main) Release = 3.16.0-4-amd64
2017/03/01 15:12:30 00000000 s (main) Version = #1 SMP Debian 3.16.39-1+deb8u1 (2017-02-22)
2017/03/01 15:12:30 00000000 s (main) Machine = x86_64
2017/03/01 15:12:30 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 26947
2017/03/01 15:12:30 00000000 s couldn't open statistics file: /var/log/oscam/oscamuser.log
2017/03/01 15:12:30 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/03/01 15:12:30 00000000 s (main) signal handling initialized
2017/03/01 15:12:30 00000000 s (net) monitor: initialized (fd=4, port=988)
2017/03/01 15:12:30 00000000 s (net) newcamd: initialized (fd=5, port=10000)
2017/03/01 15:12:30 00000000 s (net) -> CAID: 0500 PROVID: FFFFFF
2017/03/01 15:12:30 00000000 s (net) newcamd: initialized (fd=6, port=10001)
2017/03/01 15:12:30 00000000 s (net) -> CAID: 0200 PROVID: FFF000, FFFF00
2017/03/01 15:12:30 00000000 s (net) newcamd: initialized (fd=7, port=10002)
2017/03/01 15:12:30 00000000 s (net) -> CAID: 0300 PROVID: FFFFFF
2017/03/01 15:12:30 00000000 s (reader) Ziggo [mouse] creating thread for device /dev/ttyUSB0
2017/03/01 15:12:30 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/03/01 15:12:30 00000000 s (main) waiting for local card init
2017/03/01 15:12:30 58A3F116 h (webif) webif: decompressed 184578 bytes back into 434648 bytes
2017/03/01 15:12:30 58A3F116 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2017/03/01 15:12:30 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 82606
2017/03/01 15:12:30 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 77089
2017/03/01 15:12:30 0C8759B2 r (reader) Ziggo [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2017/03/01 15:12:31 0C8759B2 r (reader) Ziggo [mouse] card detected
2017/03/01 15:12:31 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 84961
2017/03/01 15:12:32 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 75283
2017/03/01 15:12:33 0C8759B2 r (reader) Ziggo [mouse] ATR: 11 E7 FF FF BC FF 03 11 E7 FF FF BC A1 DD BF E9 F6
2017/03/01 15:12:33 0C8759B2 r (reader) Ziggo [mouse] ERROR: Could not read reader->convention
2017/03/01 15:12:33 0C8759B2 r (reader) Ziggo [mouse] Error activating card.
2017/03/01 15:12:34 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 75606
2017/03/01 15:12:35 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 75811
2017/03/01 15:12:36 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 93126
2017/03/01 15:12:38 0C8759B2 r (reader) Ziggo [mouse] ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2017/03/01 15:12:38 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 80451
2017/03/01 15:12:38 0C8759B2 r (reader) Ziggo [mouse] Init card protocol T0, FI=1, F=372, D=12, N=0
2017/03/01 15:12:38 0C8759B2 r (reader) Ziggo [mouse] Setting baudrate to 115200 bps
2017/03/01 15:12:38 0C8759B2 r (reader) Ziggo [mouse] Calculated work ETU is 5.17 us reader mhz = 600
2017/03/01 15:12:38 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 85918
2017/03/01 15:12:38 0C8759B2 r (reader) Ziggo [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2017/03/01 15:12:40 0C8759B2 r (reader) Ziggo [mouse] card system not supported
2017/03/01 15:12:40 0C8759B2 r (reader) Ziggo [mouse] Normal mode failed, reverting to Deprecated Mode
2017/03/01 15:12:40 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 77468
2017/03/01 15:12:41 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 77332
2017/03/01 15:12:42 0C8759B2 r (reader) Ziggo [mouse] ATR: 11 E7 FF FF BC A1 03 11 E7 FF FF BC A1 DD BF E9 F6
2017/03/01 15:12:42 0C8759B2 r (reader) Ziggo [mouse] ERROR: Could not read reader->convention
2017/03/01 15:12:42 0C8759B2 r (reader) Ziggo [mouse] Error activating card.
2017/03/01 15:12:43 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 79926
2017/03/01 15:12:44 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 79276
2017/03/01 15:12:45 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 75310
2017/03/01 15:12:47 0C8759B2 r (reader) Ziggo [mouse] ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2017/03/01 15:12:47 0C8759B2 r (reader) Ziggo [mouse] Warning: D=0 is invalid, forcing D=1
2017/03/01 15:12:47 0C8759B2 r (reader) Ziggo [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
2017/03/01 15:12:47 0C8759B2 r (reader) Ziggo [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2017/03/01 15:12:47 0C8759B2 r (reader) Ziggo [mouse] Buffers readed 0 bytes total time_us 76430
2017/03/01 15:12:47 0C8759B2 r (reader) Ziggo [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2017/03/01 15:12:48 0C8759B2 r (reader) Ziggo [mouse] using ecm #601 for long viaccess ecm
2017/03/01 15:12:48 0C8759B2 r (reader) Ziggo [mouse] type: Viaccess (standard atr), caid: 0500, serial: ##########
2017/03/01 15:12:50 0C8759B2 r (reader) Ziggo [mouse] providers: 5 (FFF490,040210,040220,040230,040240)
2017/03/01 15:12:50 0C8759B2 r (reader) Ziggo [mouse] Maturity level [5]= older than 5 years
2017/03/01 15:12:50 0C8759B2 r (reader) Ziggo [mouse] ready for requests
2017/03/01 15:12:50 0C8759B2 r (reader) Ziggo [mouse] found card system viaccess
2017/03/01 15:12:50 0C8759B2 r (reader) Ziggo [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/03/01 15:12:50 0C8759B2 r (reader) Ziggo [viaccess] card detected
2017/03/01 15:12:50 0C8759B2 r (reader) Ziggo [viaccess] serial: ##########
2017/03/01 15:12:51 0C8759B2 r (reader) Ziggo [viaccess] provider: 1, id: ########################, sa: ########, geo: empty
2017/03/01 15:12:51 0C8759B2 r (reader) Ziggo [viaccess] provider: 2, id: ######################, sa: ########, geo: FF FF FF FF
2017/03/01 15:12:52 0C8759B2 r (reader) Ziggo [viaccess] provider: 3, id: ######################, sa: ########, geo: FF FF FF FF
2017/03/01 15:12:52 0C8759B2 r (reader) Ziggo [viaccess] provider: 4, id: ######################, sa: ########, geo: FF FF FF FF
2017/03/01 15:12:54 0C8759B2 r (reader) Ziggo [viaccess] provider: 5, id: #################, sa: ########, geo: FF FF FF FF
2017/03/01 15:12:54 00000000 s (main) init for all local cards done
2017/03/01 15:12:54 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2017/03/01 15:12:54 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2017/03/01 15:12:54 00000000 s (anticasc) ERROR: Can't open anti cascading logfile: /var/log/oscam/aclog.log (errno=2 No such file or directory)
2017/03/01 15:12:54 38001C13 c (newcamd) client connected to 10000 port
2017/03/01 15:12:54 6358C6D3 c (-) -- Skipped 1 duplicated log lines --
2017/03/01 15:12:54 6358C6D3 c (client) anonymous disconnected from 192.168.1.180
2017/03/01 15:12:54 04D3BC32 c (-) -- Skipped 1 duplicated log lines --
2017/03/01 15:12:54 04D3BC32 c (newcamd) client connected to 10000 port
2017/03/01 15:12:54 04D3BC32 c (client) anonymous disconnected from 192.168.1.180
2017/03/01 15:12:56 5786435E c (newcamd) client connected to 10000 port
2017/03/01 15:12:56 5786435E c (client) encrypted newcamd:10000-client 192.168.1.180 granted (tvheadend, au=on (1 reader))
2017/03/01 15:12:56 5786435E c (newcamd) user tvheadend authenticated successfully (Tvheadend)
2017/03/01 15:12:56 5786435E c (newcamd) AU disabled for user tvheadend
Save LogShow SettingsStop Log

Saen Acro


port = 10000@0500:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF

replace "F" with "0"(zero)

Are you shure about AU and local card? At end of pay period (32days) card will stop to work

Peter LB

I'm not shure about it. I have a Viaccess card (yousee) using USB passthrough on virtualbox.

Christian Brauwers

you should use dvbapi instead of newcamd as protocol

Peter LB

How would the settings be then. Can you please help me?

Peter LB

And I would like to have multiple users.

Christian Brauwers

Multiple User? on which system? tvh or oscam ?

on oscam side you have to config like


[dvbapi]
enabled  = 1
au = 1
pmt_mode = 0
listen_port = PORT OF YOUR CHOOSE
user = USERNAME OF YOUR CHOOSE
boxtype = pc

and in tvh you configure a oscam tcp with the port you have taken ... (can't look exactly, have changed my server to dvbviewer cause of descramble problems with my local cam)

Peter LB

Thanks for the answer. Im guessing on both. When using newcs i have multiple users with newcamd and multiple users on tvheadend for connecting to newcamd. So i can see different channels simultaniously on different muxes. Does that make sense.

Peter LB

Can someone help, I still have this problem.

Markus Endres

Try following settings:

oscam.conf:


[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 4
request_mode                  = 1
listen_port                   = 9000
user                          = dvbapi
boxtype                       = pc

oscam.user

user = dvbapi description = dvbapi for tvheadend au = 1 group = 1

tvheadend:


Mode: OSCam net protocol (rev >= 10389)
Camd.socket Filename / IP Address (TCP mode): *IP-address of oscam*
Listen / Connect port: *same port as listen_port in oscam.conf*

Peter LB

Hi thanks for getting back to me. I've already tried the configuration above just with tvheadend instead of dvbapi as user, but still the same, no EMMs:(

Saen Acro

how exactly you setup TVH
and on Oscam is readr and user are in same group

Peter LB

oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.00-unstable_svn build #0

#[global]
#usrfile = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/oscamuser.log
#logfile = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/oscam.log
#emmlogdir = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/
#cwlogdir = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/cw/
#nice = -1
#saveinithistory = 1
#lb_mode = 1
#lb_save = 100
#lb_savepath = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/
#fallbacktimeout = 2600
#lb_min_ecmcount = 5
#lb_max_ecmcount = 500

#lb_reopen_seconds = 900

#[monitor]
#port = 988
#aulow = 120
#hideclient_to = 15
#monlevel = 1

#appendchaninfo = 0

[webif]
httpport = 8888
httpuser = admin
httppwd = pass

httpallowed = 0.0.0.0-255.255.255.255

#[newcamd]
#key = 0102030405060708091011121314
#port = 10001@0500:FFF490,040210,040220,040230,040240

#keepalive = 1

[global]
logfile = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/oscam.log
nice = -1
maxlogsize = 1000
dropdups = 1
usrfile = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/oscamuser.log
cwlogdir = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/cw/
emmlogdir = /storage/.kodi/userdata/addon_data/service.softcam.oscam/log/
double_check_caid = 0500
lb_mode = 1
fallbacktimeout = 2500
lb_min_ecmcount = 5
lb_max_ecmcount = 500

lb_reopen_seconds = 900

[cache]

max_time = 100

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
listen_port = 9000
user = tvheadend

boxtype = pc

oscam.user
#[account]
#user = tvheadend
#pwd = tvheadend
##au = Ziggo
#au = 1
#group = 1,2

#cccstealth = 1

#[account]
#user = tvheadend1
#pwd = tvheadend1
##au = Ziggo1
#au = 1
#group = 1,2

#cccstealth = 1

#[account]
#user = tvheadend2
#pwd = tvheadend2
##au = Ziggo
#au = 1
#group = 1,2

#cccstealth = 1

#[account]
#user = tvheadend3
#pwd = tvheadend3
##au = Ziggo1
#au = 1
#group = 1,2

#cccstealth = 1

#[account]
#user = tvheadendtest

#au = 1

[account]
user = tvheadend
#pwd = xxxxxxxxxxxx
au = 1
group = 1,2

#caid = 0500

oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11391

#[reader]
#label = Ziggo
#protocol = smargo
#device = /dev/ttyUSB0
#detect = cd
#mhz = 369
#cardmhz = 369
#group = 1
#emmcache = 1,2,2,0
##emmcache = 2,2,2,0
#blockemm-unknown = 1
#blockemm-g = 1
#saveemm-u = 1

#saveemm-s = 1

#[reader]
#label = Ziggo1
#protocol = smargo
#device = /dev/ttyUSB1
#detect = cd
#group = 2
#emmcache = 1,2,2,0
##emmcache = 2,2,2,0
#blockemm-unknown = 1
#blockemm-g = 1
#saveemm-u = 1

#saveemm-s = 1

[reader]
label = SMARGO
description = Smartreader
protocol = smargo
device = /dev/ttyUSB0
smargopatch = 1
caid = 0500
detect = none
mhz = 600
cardmhz = 600
ident = 0500:0,FFF490,040210,040220,040230,040240
group = 1
emmcache = 1,3,2,0
#blockemm-unknown = 1
#blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
ratelimitecm = 2
ratelimittime = 10000
srvidholdtime = 5000
lb_weight = 130

inactivitytimeout = 30

[reader]
label = SMARGO1
description = Smartreader
protocol = smargo
device = /dev/ttyUSB1
smargopatch = 1
caid = 0500
detect = cd
mhz = 600
cardmhz = 600
ident = 0500:0,FFF490,040210,040220,040230,040240
group = 2
emmcache = 1,5,15,0
#blockemm-unknown = 1
#blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
ratelimitecm = 2
ratelimittime = 10000
srvidholdtime = 5000
lb_weight = 130

inactivitytimeout = 30

Tvheadend:
Mode: OSCam net protocol (rev >= 10389)
TCP Mode: 127.0.0.1
Port: 9000

Saen Acro

do not comment use disable in Oscam UI
do you have some firewall enabled

Markus Endres

If your Provider is "yousee"

your reader should be somthing like this:


[reader]
label = SMARGO1
description = Smartreader
protocol = smargo
device = /dev/ttyUSB1
smargopatch = 1
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0500:040210
group = 1

what type of reader do you use?

okay, smartreader v2

best way:


lsusb -v | grep Serial

then you should see somthing like this


Bus 001 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
  idProduct          0x6001 FT232 Serial (UART) IC
  iSerial                 3 Reader 12345678

then use


protocol = smartreader
device = SRv2;Serial:12345678

Instead of


protocol = smargo
device = /dev/ttyUSB1

Saen Acro

Also is card "active"

Markus Endres

And a new log of oscam (without serials) would help, too

Peter LB

Hi again thanks for the answer/guide.

@Markus: Yes, you are correct it's Yousee

Unfortunately it still won't get EMM's working. The "funny" thing is, that I've tested a similar setup with NewCS and Newcamd and it gets EMM right away, but I can't get it to work in Oscam which I want to use with dvbapi (it won't even work with newcamd in Oscam either:( )

I've updates the config files and here are the changes (have removed the # lines from this below, since it's not relevant)

Hope you can help, since it's really frustrating and I've spend many months on this to work.

oscam.conf: https://pastebin.com/g7S6bGLu

oscam.user: https://pastebin.com/aXdxsGsq

oscam.server:

https://pastebin.com/KBH18PTQ

Log are here:

https://pastebin.com/R7U4H0ph

For reference my settings in NewCS if you can use that for something:

newcs.xml: https://pastebin.com/YeEJJDfj