Paul Brown wrote:
> Good evening Mark,
>
> Made good progress on the web interface and tvh starts up nicely with passwords being auto filled by my browser.
>
> There is one problem no signal on/ channels on all 5 tuners.
>
> I have a 4 port DiSEqC Switch :
>
> Port 1 - 13.0 e hotbird
> Port 2 - 19.2 e astra 1
>
> The Lnb is called a monoblock twin tuner, link below.
>
>
http://www.ebay.co.uk/itm/Twin-LNB-Opticum-Premium-Monoblock-LMTP-04H-0-1db-HDTV-digital-FULL-HD-3D-/152175715057
>
> The DiSEqC Switch is built into the monoblock , so switching , ( in theory ), is done automatically.
>
> Ah...but is it, nooooooooo......well , not in tvh but it is probably 100 % me not grasping the innards of it all.
>
> The muxes are all loaded in, no signal , not even a sniff of life.
>
> My head is spinning out of control due to the many tutorials over the web.....but !! i don´t understand them too well.
>
> Would it be possible to show me in baby steps how it´s done.
>
> Many thanks again .
>
> PS: attachments below.
>
> Note - Using the unstable ppa from the bintray .
I don't personally use switches so know little about them. I only have access to 28E. Try getting one network working first then add the rest. I think you need to figure out which position in tvheadend = the position/port on the switch.
I'm not 100% sure why you're using minisatip & tvheadend on the same machine, why not just let tvheadend handle the local tuners?