- Edited
{{>toc}}
%{color:red}Manual debugging step by step%
There is a manual in WIKI with says there is a some needed packages dependencyhttps://tvheadend.org/projects/tvheadend/wiki/Building
Following this manual (from wiki) there is no chance to make any package
So here is how to solve this:(Ubuntu 14.04LTS x86_64 used but possible to be used on newer, even "x86" version)
There is a lot of packages with need to install
First packages from wiki
sudo apt install build-essential git pkg-config libssl-dev bzip2 wget libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev libswscale-dev libavresample-dev
so let see is this correct by running
./configure
and result is
{{collapse
/opt/tvheadend# ./configure
Checking support/features
checking for cc execinfo.h ... ok
checking for cc -mmmx ... ok
checking for cc -msse2 ... ok
checking for cc -Wunused-result ... ok
checking for cc getloadavg ... ok
checking for cc atomic64 ... ok
checking for cc atomic_time_t ... ok
checking for cc bitops64 ... ok
checking for cc lockowner ... ok
checking for cc qsort_r ... ok
checking for cc stime ... ok
checking for cc gmtoff ... ok
checking for cc recvmmsg ... ok
checking for cc sendmmsg ... ok
checking for cc libiconv ... fail
checking for cc libdvben50221 ... fail
checking for cc ifnames ... ok
checking for py module gzip ... ok
checking for pkg-config ... ok
checking for xgettext ... fail
ERROR: no gettext binaries found
}}
surprise nothing happens
so we need package gettextsudo apt install gettext
again configure command
{{collapse
/opt/tvheadend# ./configure
Checking support/features
checking for cc execinfo.h ... ok
checking for cc -mmmx ... ok
checking for cc -msse2 ... ok
checking for cc -Wunused-result ... ok
checking for cc getloadavg ... ok
checking for cc atomic64 ... ok
checking for cc atomic_time_t ... ok
checking for cc bitops64 ... ok
checking for cc lockowner ... ok
checking for cc qsort_r ... ok
checking for cc stime ... ok
checking for cc gmtoff ... ok
checking for cc recvmmsg ... ok
checking for cc sendmmsg ... ok
checking for cc libiconv ... fail
checking for cc libdvben50221 ... fail
checking for cc ifnames ... ok
checking for py module gzip ... ok
checking for pkg-config ... ok
checking for xgettext ... ok
checking for msgmerge ... ok
checking for gzip ... ok
checking for bzip2 ... ok
checking for pkg openssl ... ok (detected 1.0.1f)
checking for cc linux/dvb/version.h ... ok
checking for pkg zlib ... ok (detected 1.2.8)
checking for pkg liburiparser ... fail (detected <none>)
checking for pkg avahi-client ... ok (detected 0.6.31)
checking for cmake ... fail
ERROR: cmake not found
}}
Again missing essential part
sudo apt install cmake
{{collapse
/opt/tvheadend# ./configure
Checking support/features
checking for cc execinfo.h ... ok
checking for cc -mmmx ... ok
checking for cc -msse2 ... ok
checking for cc -Wunused-result ... ok
checking for cc getloadavg ... ok
checking for cc atomic64 ... ok
checking for cc atomic_time_t ... ok
checking for cc bitops64 ... ok
checking for cc lockowner ... ok
checking for cc qsort_r ... ok
checking for cc stime ... ok
checking for cc gmtoff ... ok
checking for cc recvmmsg ... ok
checking for cc sendmmsg ... ok
checking for cc libiconv ... fail
checking for cc libdvben50221 ... fail
checking for cc ifnames ... ok
checking for py module gzip ... ok
checking for pkg-config ... ok
checking for xgettext ... ok
checking for msgmerge ... ok
checking for gzip ... ok
checking for bzip2 ... ok
checking for pkg openssl ... ok (detected 1.0.1f)
checking for cc linux/dvb/version.h ... ok
checking for pkg zlib ... ok (detected 1.2.8)
checking for pkg liburiparser ... fail (detected <none>)
checking for pkg avahi-client ... ok (detected 0.6.31)
checking for cmake ... ok
checking for cc -lstdc++ ... ok
checking for cc nvEncodeAPI.h ... fail
checking for cc sys/inotify.h ... ok
fetching dvb-scan files ... ok
checking for pkg dbus-1 ... ok (detected 1.6.18)
Compiler:
Using C compiler: cc
Build for arch: x86_64
Binaries:
Using PYTHON: python
Using GZIP: gzip
Using BZIP2: bzip2
Options:
pie yes
ccdebug no
cwc yes
capmt yes
constcw yes
linuxdvb yes
satip_server yes
satip_client yes
hdhomerun_client yes
hdhomerun_static yes
iptv yes
tsfile yes
dvbscan yes
timeshift yes
trace yes
imagecache yes
avahi yes
zlib yes
libav yes
ffmpeg_static yes
libx264 yes
libx264_static yes
libx265 yes
libx265_static yes
libvpx yes
libvpx_static yes
libtheora yes
libtheora_static yes
libvorbis yes
libvorbis_static yes
libfdkaac yes
libfdkaac_static yes
nvenc no
qsv no
libmfx_static no
inotify yes
epoll yes
uriparser no
ccache no
tvhcsa yes
bundle no
dvbcsa no
dvben50221 no
kqueue no
dbus_1 yes
android no
tsdebug no
gtimer_check no
slow_memoryinfo no
libsystemd_daemon no
bintray_cache yes
execinfo yes
mmx yes
sse2 yes
W_unused_result yes
getloadavg yes
atomic64 yes
atomic_time_t yes
bitops64 yes
lockowner yes
qsort_r yes
stime yes
gmtoff yes
recvmmsg yes
sendmmsg yes
ifnames yes
py_gzip yes
bin_pkg_config yes
bin_xgettext yes
bin_msgmerge yes
bin_gzip yes
bin_bzip2 yes
ssl yes
linuxdvbapi yes
upnp yes
bin_cmake yes
stdcpp yes
libogg_static yes
inotify_h yes
mpegts yes
mpegts_dvb yes
Packages:
openssl 1.0.1f
zlib 1.2.8
avahi-client 0.6.31
dbus-1 1.6.18
Installation paths:
Prefix: /usr/local
Binaries: ${prefix}/bin
Libraries: ${prefix}/lib
Data files: ${prefix}/share
Man pages: ${datadir}/man
Final Binary:
/opt/tvheadend/build.linux/tvheadend
Tvheadend Data Directory:
/usr/local/share/tvheadend
}}
And success, there is a chance to build .DEB, but is it so simple are we miss some?
checking for cc libiconv ... fail
checking for cc libdvben50221 ... fail
checking for pkg liburiparser ... fail (detected <none>)
those maby not 100% needed but lets install it:
----
libiconv there is some strange with this library in newer version it is build in in in other library
sudo apt install libiconv-hook-dev
/// this will not solve dependency error message, maby error in configure script
----
libdvben50221 this is DVB-CI support for hardware CAM module on some devicessolved by instaling dvb-apps
sudo apt install dvb-apps
----
liburiparserLet's see with configuresudo apt install liburiparser-dev
{{collapse
/opt/tvheadend# ./configure
Checking support/features
checking for cc execinfo.h ... ok
checking for cc -mmmx ... ok
checking for cc -msse2 ... ok
checking for cc -Wunused-result ... ok
checking for cc getloadavg ... ok
checking for cc atomic64 ... ok
checking for cc atomic_time_t ... ok
checking for cc bitops64 ... ok
checking for cc lockowner ... ok
checking for cc qsort_r ... ok
checking for cc stime ... ok
checking for cc gmtoff ... ok
checking for cc recvmmsg ... ok
checking for cc sendmmsg ... ok
checking for cc libiconv ... fail
checking for cc libdvben50221 ... ok
checking for cc ifnames ... ok
checking for py module gzip ... ok
checking for pkg-config ... ok
checking for xgettext ... ok
checking for msgmerge ... ok
checking for gzip ... ok
checking for bzip2 ... ok
checking for pkg openssl ... ok (detected 1.0.1f)
checking for cc linux/dvb/version.h ... ok
checking for pkg zlib ... ok (detected 1.2.8)
checking for pkg liburiparser ... ok (detected 0.7.5)
checking for pkg avahi-client ... ok (detected 0.6.31)
checking for cmake ... ok
checking for cc -lstdc++ ... ok
checking for cc nvEncodeAPI.h ... fail
checking for cc sys/inotify.h ... ok
fetching dvb-scan files ... ok
checking for pkg dbus-1 ... ok (detected 1.6.18)
Compiler:
Using C compiler: cc
Using LD flags: -ldvben50221 -ldvbapi -lucsi
Build for arch: x86_64
Binaries:
Using PYTHON: python
Using GZIP: gzip
Using BZIP2: bzip2
Options:
pie yes
ccdebug no
cwc yes
capmt yes
constcw yes
linuxdvb yes
satip_server yes
satip_client yes
hdhomerun_client yes
hdhomerun_static yes
iptv yes
tsfile yes
dvbscan yes
timeshift yes
trace yes
imagecache yes
avahi yes
zlib yes
libav yes
ffmpeg_static yes
libx264 yes
libx264_static yes
libx265 yes
libx265_static yes
libvpx yes
libvpx_static yes
libtheora yes
libtheora_static yes
libvorbis yes
libvorbis_static yes
libfdkaac yes
libfdkaac_static yes
nvenc no
qsv no
libmfx_static no
inotify yes
epoll yes
uriparser yes
ccache no
tvhcsa yes
bundle no
dvbcsa no
dvben50221 yes
kqueue no
dbus_1 yes
android no
tsdebug no
gtimer_check no
slow_memoryinfo no
libsystemd_daemon no
bintray_cache yes
execinfo yes
mmx yes
sse2 yes
W_unused_result yes
getloadavg yes
atomic64 yes
atomic_time_t yes
bitops64 yes
lockowner yes
qsort_r yes
stime yes
gmtoff yes
recvmmsg yes
sendmmsg yes
libdvben50221 yes
ifnames yes
py_gzip yes
bin_pkg_config yes
bin_xgettext yes
bin_msgmerge yes
bin_gzip yes
bin_bzip2 yes
ssl yes
linuxdvbapi yes
upnp yes
bin_cmake yes
stdcpp yes
libogg_static yes
inotify_h yes
linuxdvb_ca yes
mpegts yes
mpegts_dvb yes
Packages:
openssl 1.0.1f
zlib 1.2.8
liburiparser 0.7.5
avahi-client 0.6.31
dbus-1 1.6.18
Installation paths:
Prefix: /usr/local
Binaries: ${prefix}/bin
Libraries: ${prefix}/lib
Data files: ${prefix}/share
Man pages: ${datadir}/man
Final Binary:
/opt/tvheadend/build.linux/tvheadend
Tvheadend Data Directory:
/usr/local/share/tvheadend
}}
Some will ask about
checking for cc nvEncodeAPI.h ... fail
I don't use nVidia can't help, there is a separate topic
So let's continue with bulding of .DEB packages.
Next step is to use Autobuild.sh, with will make all automatically. or not.
{{collapse
/opt/tvheadend# ./Autobuild.sh
dpkg-buildpackage: пакет източник tvheadend
dpkg-buildpackage: source version 4.1-2398~gc38af4c
dpkg-buildpackage: source distribution unstable
dpkg-buildpackage: source changed by Andreas Öman <andreas@tvheadend.org>
dpkg-buildpackage: host architecture amd64
dpkg-source --before-build tvheadend
dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 7.0.50) libcurl4-gnutls-dev
dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
dpkg-buildpackage: warning: (Use -d flag to override.)
Again something missing
sudo apt install debhelper libcurl4-gnutls-dev
Crossing fingers an run againAutobuild.sh
If everything is OK,compilation of FFMPEG X264/5 OGG AAC and some other codecs will be compiled before TVHeadend and finally .DEB files.
If there is no critical errors at the end there is show something as this
dpkg-buildpackage: binary only upload (no source included)
doozer-versioned-artifact:/opt/tvheadend/../tvheadend_4.1-2398~gc38af4c_amd64.deb:deb:application/x-deb:tvheadend_4.1-2398~gc38af4c_amd64.deb
doozer-versioned-artifact:/opt/tvheadend/../tvheadend-dbg_4.1-2398~gc38af4c_amd64.deb:deb:application/x-deb:tvheadend-dbg_4.1-2398~gc38af4c_amd64.deb
doozer-versioned-artifact:/opt/tvheadend/../tvheadend_4.1-2398~gc38af4c_amd64.changes:changes:text/plain:tvheadend_4.1-2398~gc38af4c_amd64.changes
/opt/tvheadend/../
and files are generated in../ (upper level) in this case/opt installation can be done by command
sudo dpkg -i tvheadend_4.1-2398~gc38af4c_amd64.deb
----
=====Edit new dependency libpcre /Perl 5 Compatible Regular Expression Library/
to install it add
Sudo apt instal libpcre2-dev
Warning library is not accessible to all OS versions then uselibpcre3-dev
----
%{color:red}GPU VA hardware acceleration aka Transcoding%
checking for pkg libva >=0.38.0 ... ok (detected 0.39.0) checking for pkg libva-x11 >=0.38.0 ... ok (detected 0.39.0) checking for pkg libva-drm >=0.38.0 ... ok (detected 0.39.0)
libva-dev libva-drm1 (libva-drm2) libva-x11-1 (libva-x11-1) i965-va-driver-shaders (Latest Debian probably Ubuntu 20.04 for Intel GPU)
to work hardware need to support VA-API version minimum 0.39.0ex.
{{collapse
i5-4440 - HD4600
# vainfo
error: XDG_RUNTIME_DIR not set in the environment.
error: can't connect to X server!
libva info: VA-API version 0.39.0 <<<<<<<<<<<<<<<<<<<<<<<<<<<
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_39
libva info: va_openDriver() returns 0
vainfo: VA-API version: 0.39 (libva 1.7.0)
vainfo: Driver version: Intel i965 driver for Intel(R) Haswell Desktop - 1.7.0
vainfo: Supported profile and entrypoints
VAProfileMPEG2Simple : VAEntrypointVLD
VAProfileMPEG2Simple : VAEntrypointEncSlice
VAProfileMPEG2Main : VAEntrypointVLD
VAProfileMPEG2Main : VAEntrypointEncSlice
VAProfileH264ConstrainedBaseline: VAEntrypointVLD
VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice
VAProfileH264Main : VAEntrypointVLD
VAProfileH264Main : VAEntrypointEncSlice
VAProfileH264High : VAEntrypointVLD
VAProfileH264High : VAEntrypointEncSlice
VAProfileH264MultiviewHigh : VAEntrypointVLD
VAProfileH264MultiviewHigh : VAEntrypointEncSlice
VAProfileH264StereoHigh : VAEntrypointVLD
VAProfileH264StereoHigh : VAEntrypointEncSlice
VAProfileVC1Simple : VAEntrypointVLD
VAProfileVC1Main : VAEntrypointVLD
VAProfileVC1Advanced : VAEntrypointVLD
VAProfileNone : VAEntrypointVideoProc
VAProfileJPEGBaseline : VAEntrypointVLD
}}
there is a situation when Intel drivers are very buggy but work alsoex:
{{collapse
Intel Corporation Atom Processor D410 - IGMA3510
#vainfo
error: XDG_RUNTIME_DIR not set in the environment.
error: can't connect to X server!
libva info: VA-API version 0.39.0
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/i386-linux-gnu/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_39
libva error: /usr/lib/i386-linux-gnu/dri/i965_drv_video.so init failed
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit
}}
----
%{color:red}Short version of all needed packages%
sudo apt install build-essential git ccache libpcre2-dev pkg-config libssl-dev bzip2 \ wget libavahi-client-dev zlib1g-dev libavcodec-dev libavutil-dev libavformat-dev \ libswscale-dev libavresample-dev gettext cmake libiconv-hook-dev liburiparser-dev \ debhelper libcurl4-gnutls-dev python-minimal libdvbcsa-dev python-requests
Iflibpcre2-dev not found uselibpcre3-dev
Optional packages for optional features ;)
sudo apt install dvb-apps libva-dev libva-drm1 libva-x11-1
If used Ubuntu 18.04+libva-drm2 libva-x11-2
To enable SYSTEMD service--enable-libsystemd_daemon on Ubuntu 18.04 and upper, installlibsystemd-dev
Keep in mind, this will install ~400+Mb packages. Some packages will install other packages to satisfy its dependencies
----
%{color:red}How to clone Github repo to local folder%
Usually regular command to clone repo is
git clone https://github.com/tvheadend/tvheadend.git
This will download latest source code (unstable) ready for compilation
but if need stable or other
use command
git clone -b release/4.2 https://github.com/tvheadend/tvheadend.git
git clone -b <branch> <remote_repo>
branch list can be seen at https://github.com/tvheadend/tvheadend
----
%{color:red}ARM OpenMax support%
Use only on ARM boards
apt install libomxil-bellagio-dev
--enable-omx
----
%(color:red)Python%
Autobuild script search forpython but it was replaced bypython3 solution:--python=/usr/bin/python3
----
%{color:red}Automated build script%
Currently just clone only latest repo source code and compile it
Use command#!/bin/bash BASE=$(dirname "$0") ( if [ -d "$BASE/tvheadend" ]; then cd "$BASE/tvheadend" git pull else cd "$BASE" git clone https://github.com/tvheadend/tvheadend.git tvheadend # --depth=5 (need version tag workaround else 0.0.0 version) cd "$BASE/tvheadend" fi time AUTOBUILD_CONFIGURE_EXTRA="--disable-bintray_cache --enable-vaapi --enable-nvenc --disable-hdhomerun_client --disable-hdhomerun_static " ./Autobuild.sh -j$(nproc) # edit only betwin "quotation marks" ) | tee "$BASE/build.log"
./configure --help
to see possible options.
{{collapse
Usage: ./configure [options]
Miscellaneous
--help Print this message
Installation Paths
--prefix=DIR$ Installation root [/usr/local]
--bindir=DIR Install binaries in DIR [${prefix}/bin]
--libdir=DIR Install libraries in DIR [${prefix}/lib]
--mandir=DIR Install man pages in DIR [${datadir}/man]
--datadir=DIR Install data files in DIR [${prefix}/share]
Compiler/Arch
--cc=CC Build using compiler [cc]
--cflags=CFLAGS Build using C flags
--ldflags=LDFLAGS Build using LD flags
--cpu=CPU Build and optimize for specific CPU
--arch=ARCH Build for architecture [x86_64]
--platform=PLATFORM Build for platform [linux]
--nowerror Build without -Werror CFLAGS
--python=PYTHON Use python binary [python]
Options
--disable-pie Disable pie
--enable-ccdebug Enable ccdebug
--disable-cardclient Disable cardclient
--enable-cardclient Enable cardclient
--disable-cwc Disable cwc
--disable-cccam Disable cccam
--disable-capmt Disable capmt
--disable-constcw Disable constcw
--disable-linuxdvb Disable linuxdvb
--disable-satip_server Disable satip_server
--disable-satip_client Disable satip_client
--enable-hdhomerun_client Enable hdhomerun_client
--disable-hdhomerun_static Disable hdhomerun_static
--disable-iptv Disable iptv
--disable-tsfile Disable tsfile
--disable-dvbscan Disable dvbscan
--disable-timeshift Disable timeshift
--disable-trace Disable trace
--disable-avahi Disable avahi
--enable-avahi Enable avahi
--disable-zlib Disable zlib
--enable-zlib Enable zlib
--disable-libav Disable libav
--enable-libav Enable libav
--disable-ffmpeg_static Disable ffmpeg_static
--disable-libx264 Disable libx264
--disable-libx264_static Disable libx264_static
--disable-libx265 Disable libx265
--disable-libx265_static Disable libx265_static
--disable-libvpx Disable libvpx
--disable-libvpx_static Disable libvpx_static
--disable-libtheora Disable libtheora
--disable-libtheora_static Disable libtheora_static
--disable-libvorbis Disable libvorbis
--disable-libvorbis_static Disable libvorbis_static
--enable-libfdkaac Enable libfdkaac
--disable-libfdkaac_static Disable libfdkaac_static
--disable-libopus Disable libopus
--disable-libopus_static Disable libopus_static
--enable-nvenc Enable nvenc
--disable-vaapi Disable vaapi
--enable-vaapi Enable vaapi
--enable-mmal Enable mmal
--enable-omx Enable omx
--disable-inotify Disable inotify
--enable-inotify Enable inotify
--disable-epoll Disable epoll
--enable-epoll Enable epoll
--disable-pcre Disable pcre
--enable-pcre Enable pcre
--disable-pcre2 Disable pcre2
--enable-pcre2 Enable pcre2
--disable-uriparser Disable uriparser
--enable-uriparser Enable uriparser
--disable-ccache Disable ccache
--enable-ccache Enable ccache
--disable-tvhcsa Disable tvhcsa
--enable-tvhcsa Enable tvhcsa
--enable-bundle Enable bundle
--enable-pngquant Enable pngquant
--enable-kqueue Enable kqueue
--disable-dbus_1 Disable dbus_1
--enable-dbus_1 Enable dbus_1
--enable-android Enable android
--enable-gtimer_check Enable gtimer_check
--enable-slow_memoryinfo Enable slow_memoryinfo
--enable-libsystemd_daemon Enable libsystemd_daemon
--disable-pcloud_cache Disable pcloud_cache
--disable-ddci Disable ddci
--enable-cclang_threadsan Enable cclang_threadsan
--enable-gperftools Enable gperftools
