configuration troubles

david graff

Hello,

I can get to the part of bringing up the configuration site and i can see my adapter:

auvitek... dvb-c and auvitek... atsc

I can configure them and add a network to them but when i should be seeing channels scanning

in nothing happens

what should i do?

david graff

Nobody has had this same problem?

mpmc

Firstly, have you:

* Created a network.
* Added muxes.
* Assigned the network to an adaptor.
* Enabled the adaptor.
It can take up to 10 mins or so for a scan to start, you can test if your network is working by playing one of my muxes (copy and paste the mux link into VLC).

david graff

Thank you Mark for the reply.

Now i get this error after adding the firmware to the proper location and trying to scan:

segfault at 352e303d71b3 ip 00000000004929e5 sp 00007fff4d5920e0 error 4 in tvheadend[400000+148000]

Im going to reboot my computer and try again

thanks,
David

david graff

I open them with VLC player but nothing happens

theres no errors in dmesg

-David

mpmc

david graff wrote:
> I open them with VLC player but nothing happens
>
> theres no errors in dmesg
>

> -David

Ok, open the bottom panel (system/tvheadend log) try playing a mux and watch the output from that panel, it should give you the reason for the failure.

david graff

ok here is some of the log.. im not sure what all is needed:

11:40:09.000 subscription: 0009: "keep" unsubscribing

2016-08-24 11:40:10.000 mpegts: 57.028MHz in 4 - tuning on Auvitek AU8522 QAM/8VSB Frontend : ATSC #0

2016-08-24 11:40:10.000 subscription: 000C: "keep" subscribing to mux "57.028MHz", weight: 1, adapter: "Auvitek AU8522 QAM/8VSB Frontend : ATSC #0", network: "4", service: "Raw PID Subscription"

2016-08-24 11:40:10.000 subscription: 000B: "epggrab" subscribing to mux "57.028MHz", weight: 4, adapter: "Auvitek AU8522 QAM/8VSB Frontend : ATSC #0", network: "4", service: "Raw PID Subscription"

2016-08-24 11:40:11.239 http: 127.0.0.1: using ticket E239C02677C8413726E27315D84589940D6E978A for /stream/service/21313714accf4925cd0f2b5e4dff7503

2016-08-24 11:40:11.239 mpegts: 575.028MHz in 4 - tuning on Auvitek AU8522 QAM/8VSB Frontend : ATSC #0

2016-08-24 11:40:11.239 subscription: 000C: "keep" unsubscribing

david graff

something about "no free adapter"??

2016-08-24 11:40:57.000 subscription: 0014: No input source available for subscription "HTTP" to service "4/545.028MHz/COMET " in mux "545.028MHz in 4"

2016-08-24 11:40:57.000 webui: Couldn't start streaming /stream/service/054fd7759eb5df250c06b98a87ab59d8?ticket=9CC9766893991A579E6044C172686D72E6B4672A, No free adapter

2016-08-24 11:40:57.000 subscription: 0014: "HTTP" unsubscribing, hostname="127.0.0.1", client="VLC/2.2.2 LibVLC/2.2.2"

2016-08-24 11:40:57.000 TS: 4/575.028MHz/KDNL-DT: MPEG2VIDEO @ #49 Continuity counter error (total 57143)

david graff

I just switched to a different antenna and now it works!

wow thank you Mark Clarkstone for your help

much appreciated.

david graff

Now i just need to figure out how to stream the video to Kodi ;)

mpmc

david graff wrote:

> Now i just need to figure out how to stream the video to Kodi ;)

Use the Tvheadend HTSP Client Plugin, it's available usually with Kodi on most distros :)

Glad you got it working :).

david graff

Ive got TvHedend htsp client configured with my IP address of my Ubuntu machine and the tvheadend username and password.

Now Im not sure where to go next to get video streaming on kodi

-David

david graff

mapped the channels in tvheadend and now its working like a charm

thanks again to Mark

-David

mpmc

david graff wrote:
> mapped the channels in tvheadend and now its working like a charm
>
> thanks again to Mark
>
>

> -David

Ok, you need to go to services tab and map the ones you want as channels, (use ctrl/shift + click to select multiple entries) then press the [Map Services] -> [Map Selected] from the menu bar.

Once you've done that, you need to close and reopen kodi, make sure that you've enabled "TV" in Kodi (it's in the settings, but iirc if you've enabled the client that should be enabled already). When you next start Kodi it should pull in all your channels from the backend (tvheadend) and you should be good to go :).

If you're running 4.1.xxxx the [Help] pages should give more info :)

david graff

thank you much!!

now i just need to figure out how to get my PVR channels in the TDB tv guide so i can set it up to be like a satelite tv guide menu