Turned out that the right frequency for DVB-T2 HD channels was 642MHz instead of 650MHz. I am wondering if the frequency is different depending on the city.. Anyway I cannot watch the HD channels on my PI yet:
when I stream an HD channel on TVHeadend from my DVB-T2 stick the CPU goes to 100% and the video gets very jerky and unwatchable (SD channels work fine). More in detail the setup that I have:
- Raspberry Pi 2 with Raspbian Jessie, kernel 4.4.21-v7+
- Backend is TVHeadend 4.1-2247 (github build)
- DVB-T2 Stick is a Geniatech T230C (newer version of the T230, also known as August T210, driver Silicon Labs Si2168 compiled from here:
https://bitbucket.org/CrazyCat/media_build )
- Kodi 16.1 (github build): MPG2 and WVC1 codecs purchased and enabled; /boot/config.txt contains gpu_mem=256; video hardware acceleration MMAL enabled;
- PVR Frontend is TVHeadend HTSP Client 2.2.12
When I select an SD channel it works perfectly, when I select an HD channel the CPU goes quicky to 100% and I can't watch the channel. When I watch the HD channel on my Windows computer with VLC it works flawlessy (so I guess my problem is not with the backend but with the frontend/kodi)
I will attach a Kodi log file and a screenshot
What am I doing wrong?