Hi!
I'm new to tvheadend having spent some time already with mythtv and kaffeine :-)
I have a Tevii S480 DVB-S2 card (which is effectively two S660 USB receivers on an internal PCI-e card). I have the firmware correctly loading and the card works fine in Myth and in Kaffeine.
When I start tvheadend and look at the web interface I can see two receivers "Montage Technology DS3000/TS2020"
Regardless of whether I add a whole bunch of multiplexes from the 'General' tab (I'm in the UK and receive Astra 19.2E / 28.2E with a fixed dish and a single 4-output LNB) or whether I add just a single multiplex (the details I use to tune Myth are DVB-S | 10714000 | Horiz | 22000000 | 5/6 | QPSK ) the 'Quality' bar starts at 100% and gradually drops to zero. Frontend status starts at 'Unknown' and switches to 'No signal'
In the web interface with debug logging enabled I see this:
Jan 24 16:11:18 dvb: "/dev/dvb/adapter0" tuning via s2api to "10,714,000 kHz Horizontal (Default)" (964000, 22000000 Baud, 5/6, SYS_DVBS, QPSK)
Jan 24 16:11:23 dvb: "10,714,000 kHz Horizontal (Default)" on adapter "Montage Technology DS3000/TS2020", status changed to No signal
I've tried changing the 'satconf' values but nothing seems to help!
Any clues as to where I should look next? As I say the card works 100% in Kaffeine and in Mythtv.
Thanks in anticipation!
George