Ivan Ballestar wrote:
> Hi another time.
>
> I changed the card, but i have the same problem, doesn't work.
>
> My computer:
> Dell Optiplex 780 with
> Intel Celeron E3400 @ 2.60GHz
> 1Gb Ram at 800Mhz
> SO: Ubuntu 14.04.3 Desktop AMD64
> Capture Device: WinTV HVR 4000
>
> In a first time appears 2 capture cards, but one time updated the drivers, one card.
>
> Steps one time installed the system:
> 1. Update & Upgrade
> 2. Add at the sources.list the source and install
> 3. Install the drivers step by step from this manual
>
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-4000#Making_it_Work
> Step from this part
> wget
http://www.wintvcd.co.uk/drivers/88x_2_126_28225_WHQL.zip
>
> 4. Reboot
>
>
> LSPCI
> 04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
> 04:00.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
> 04:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
> 04:00.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05)
>
> TvHeadEnd Build 4.0.5 config Step by Step in my computer:
>
> In the TV Adapters, only appears "Conexant CX24116/CX24118 : DVB-S #0"
> And the DVB-T adapter????
>
> 1. Configuration - DVB Inputs - Networks
> Add - DVB-S Network
> Network Name: "Astra 19.2"
> Marked options: Network discovery
> Pre-defined Muxes: >19.2E Astra
> Orbital Position: 19.2E Astra
> Character Set: AUTO
>
> 2. Configuration - DVB Inputs - TV Adapters
> Double clic on the card and edit this settings:
> Networks: Select the created network
> Save.
> (Need repeat 3 or 4 times for good saving)
>
> 3. Configuration - DVB Inputs - Muxes
> Create new mux with the parameters of the new range of DVB-S2:
>
> Scan Status - IDLE
> AC-3 Detection - Standard
> Frecuency (Hz): 10891250
> Symbol Rate: 22000000
> And the another steps by the web
> Character set: AUTO
>
> After scan, the result is always the same:
> Scan Result: FAIL
>
> LOG of scan
> 2015-08-27 22:36:08.640 mpegts: 10891.25H in Astra 19.2 - tuning on Conexant CX24116/CX24118 : DVB-S #0
> 2015-08-27 22:36:08.700 opentv-skyuk: registering mux 10891.25H in Astra 19.2
> 2015-08-27 22:36:08.701 subscription: 0001: "scan" subscribing to mux "10891.25H", weight: 6, adapter: "Conexant CX24116/CX24118 : DVB-S #0", network: "Astra 19.2", service: "Raw PID Subscription"
> 2015-08-27 22:36:18.000 mpegts: 10891.25H in Astra 19.2 - scan no data, failed
> 2015-08-27 22:36:18.000 subscription: 0001: "scan" unsubscribing
>
> I need help... 1 month, 2 cards, 2 computers and many hours without solution.
>
> Thanks and sorry for my english.
Make sure you're not just using AUTO for the rest of the values when adding a mux. Some tuners can be rather picky about AUTO values. You need to specify Modulation, FEC and rolloff (which is usually 35).
If you're sure that you've entered the details correctly try using w_scan to scan & see if that works.