SAT>IP with EyeTV Netstream 4Sat - initial setup

Scott Hardin

Could someone please provide the basics on setting up an EyeTV Netstream 4Sat via SAT>IP? I experimented around based on the wiki/forum/docs info, but there is minimal info on these devices for TVheadend since they are so new. I also tried a "Force Scan" in the "Networks" configuration, but that didn't work either.

Here is my current configuration:

* Software version:

HTS TVheadend 4.1-360~g0916e52

* Configuration -> DVB Inputs -> TV adapters:

EyeTV Netstream 4Sat is listed and first two tuners are enabled (I only have these connected to the LNB)

gary tan

there's some posts regarding that device here if you didnt see them already

https://tvheadend.org/issues/3005#change-14552

btw in the tvheadend - tuner 1 pos 1 params screenshot you havent picked the netstream network you've set up

Ian C

Agree - you need to select the network in tuner 1 pos 1. If you then edit the network and select 28.2E Astra under 'pre-defined muxes' and then save, it will populate the muxes tab and start scanning. Unfortunately that's as far as I can get - it fails with 'scan no data, failed' for every mux. Let us know if you have more success!

Ian C

If you restart the tvheadend service and try scanning a mix again, you get this error:

2015-08-18 19:32:48.000 mpegts: 10729V in Freesat - tuning on SAT>IP DVB-S Tuner #1 (192.168.1.103)
2015-08-18 19:32:48.000 subscription: 0004: "scan" subscribing to mux "10729V", weight: 2, adapter: "SAT>IP DVB-S Tuner #1 (192.168.1.103)", network: "Freesat", service: "Raw PID Subscription"
2015-08-18 19:32:48.483 satip: SAT>IP DVB-S Tuner #1 (192.168.1.103) - RTSP SETUP error -5 (Input/output error) [6-403]
2015-08-18 19:32:58.000 mpegts: 10729V in Freesat - scan no data, failed

2015-08-18 19:32:58.000 subscription: 0004: "scan" unsubscribing

Anyone know what the RTSP SETUP error -5 (Input/output error) means? Is it related to bug 3005?

andrew miller

Hi there, I have brought one of these, did you ever have any luck getting this to work??

nothing works

Hello all,

was anyone ever able to make netstream 4sat work with TVHeadend?......

Saen Acro

Nuno Araujo wrote:
> Hello all,
>

> was anyone ever able to make netstream 4sat work with TVHeadend?......

My works. what is problem with yours?

Saen Acro

Your scenario is strange

describe more cabling connection and diseq switches

https://www.satlex.us/en/4participants-type_conf_4p_2s_quad.html

netstreamer have buildin diseq with MODE can be manipulated via android app