Some Channels uses wrong CAID

der kopf

Hello,

ich have since a few Weeks a Problem. I connected my TVH with a Oscam via Newcamd 3Connections on 3 different CAID 1722,1834,09C7

but when i tune on ProSiebe the TVH try to Connect via 1834 but he must use 09C7 connection, also the Channel stays Black here is the log.

2015-07-02 10:21:13.022 htsp: 192.168.178.33 [ VLC media player ]: Disconnected
2015-07-02 10:21:13.022 subscription: 016C: "192.168.178.33 [ VLC media player ]" unsubscribing from "ProSieben HD", hostname="192.168.178.33", username="VLC media player"
2015-07-02 10:21:13.022 subscription: 016E: "keep" unsubscribing

2015-07-02 10:21:13.022 subscription: 016D: "keep" unsubscribing

When i turned off the Other connections (1722 and 1834) the Channel encrypts because he uses CAID 09C7.

Can i somehow say to some Channels with wich CAID he should connect to the Oscam?

Saen Acro

is Mgclient enabled in Oscam?

der kopf

nope newcamd and cccam are only enabled. the most channels work only some uses the wrong caid id. this is a new problem a few months ago it worked all fine.

i updatet tvheadend lastly.

Saen Acro

oscam.conf


[newcamd]
mgclient                      = 1

der kopf

Okay now Pro7 works but the channels other the other CAID not.

2015-07-02 16:03:04.908 subscription: 00BE: "192.168.178.33 [ VLC media player ]" subscribing on channel "NatGeo HD", weight: 150, adapter: "CXD2837 DVB-C DVB-T/T2 : DVB-C #0", network: "Kabel Deutschland", mux: "530MHz", provider: "SKY", service: "NatGeo HD", profile="htsp", hostname="192.168.xxx.xx", client="VLC media player"
2015-07-02 16:03:04.908 mpegts: 610MHz in Kabel Deutschland - tuning on CXD2837 DVB-C DVB-T/T2 : DVB-C #0
2015-07-02 16:03:05.133 subscription: 00C0: "keep" subscribing to mux "610MHz", weight: 1, adapter: "CXD2837 DVB-C DVB-T/T2 : DVB-C #0", network: "Kabel Deutschland", service: "Raw PID Subscription"
2015-07-02 16:03:05.133 subscription: 00BF: "keep" subscribing to mux "530MHz", weight: 1, adapter: "CXD2837 DVB-C DVB-T/T2 : DVB-C #0", network: "Kabel Deutschland", service: "Raw PID Subscription"
2015-07-02 16:03:05.133 subscription: 00AB: "keep" unsubscribing

2015-07-02 16:03:05.710 descrambler: cannot decode packets for service "NatGeo HD"

i have 3 ca´s in tvheadend 1 for every caid on 3 different ports

in oscam i have oder newcamd:
[newcamd]
port = 15050@1834:000000;15051@1722:000000;15052@09C7:000000
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
<<

Saen Acro

Is betatunel enabled?

der kopf

yes on the connected user

1834.FFFF:1722

der kopf

der kopf wrote:
> yes on the connected user
>

> 1834.FFFF:1722

only pro7, sat1,vox didn't work.

when i enable mgcam then only the 09c7caids work

2015-07-02 17:07:05.144 mpegts: 610MHz in Kabel Deutschland - tuning on CXD2837 DVB-C DVB-T/T2 : DVB-C #0
2015-07-02 17:07:05.144 subscription: 0112: "keep" subscribing to mux "610MHz", weight: 1, adapter: "CXD2837 DVB-C DVB-T/T2 : DVB-C #0", network: "Kabel Deutschland", service: "Raw PID Subscription"
2015-07-02 17:07:05.144 subscription: 0111: "keep" subscribing to mux "130MHz", weight: 1, adapter: "CXD2837 DVB-C DVB-T/T2 : DVB-C #0", network: "Kabel Deutschland", service: "Raw PID Subscription"
2015-07-02 17:07:05.786 descrambler: cannot decode packets for service "ProSieben HD"

Saen Acro

https://tvheadend.org/issues/2987 maby this will be solution

der kopf

cccam support would be awesome.

any idea when this will be included?

there is is point in the feature request

the newcamd protocol (cwc in tvh) supports multiple CAIDs too - using the mgcamd extension

like i said i have no idea how this should work with my oscam server, i can't add multiple caids to one port.

and here you can read that every card need an extra port but this is 2 years old
https://tvheadend.org/d/1128-multiple-caid

Saen Acro

der kopf wrote:
> cccam support would be awesome.

> any idea when this will be included?

when more votes are added to
https://tvheadend.org/issues/2987

der kopf

okay,

can you tell me how to vote for that?

Saen Acro

write simple comment with will explain need and etc. ;)