Cant decrypt channels for 2 or more clients

cilin dro

I use tvheadend + oscam + CWC and works fine if I use it. When another person tries to watch any channel, the channels will not decrypt. I use the 3.9 vesion of tvheadend. I don't know if is the CWC account that this limited use for a single ip. Also i use multiple CWC accounts and still see the same problem. I leave my settings of oscam if they see something unusual.

oscam.config

[global]
logfile = /var/log/oscam/oscam.log
clienttimeout = 30000
nice = -1
waitforcards = 0
readerrestartseconds = 0
block_same_ip = 0
block_same_name = 0
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
lb_mode = 1

lb_nbest_readers = 2

[cache]

max_time = 33

[newcamd]
port = 12000@1816:000000
allowed = 127.0.0.1
key = 0102030405060708091011121314

keepalive = 1

[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1

boxtype = pc

[webif]
httpport = 8888
httpuser = root
httppwd = root

httpallowed = 1.1.1.1-254.254.254.254,127.0.0.1

oscam.server

[reader]
label = DISH
description = TEST
protocol = newcamd
device = xxxxxxx.org,20000
key = 0102030405060708091011121314
user = xxxxxxx
password = xxxxxxx
connectoninit = 1
fallback = 1
caid = 1816
ident = 1816:000000

group = 1

oscam.user

[account]
user = xxxxxxxxx
pwd = xxxxxxxxx
caid = 1816
au = 1
betatunnel = 1816.FFFF:1840
group = 1
ident = 1816:000000

Saen Acro

add user and stop dvbapi in TVH add N-line to oscam with created user
add mgclient = 1 to N server in oscam

cilin dro

thanks for answering usually nobody answer my post. I am begginer using oscam. can explain better how it works mgclient and how I add a N-line

Saen Acro

oscam.conf


[newcamd]
port                          = 10001@1816:000000
key                           = 0102030405060708091011121314
mgclient                      = 1

create user for Tvheadend

restart oscam

go to Tvheadend
Configuration >CAs >ADD
cwc (newcamd)
add ip or dns name for oscam
use name pass an DES key
check enable
open debug window in bottom
click save and if it is ok in log ypu mus see someting as


2015-06-17 00:27:13.643 cwc: Attemping to connect to 127.0.0.1:10002
2015-06-17 00:27:13.643 cwc: Connected to 127.0.0.1:10002
2015-06-17 00:27:13.647 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a 0x4a00-card [0x4aee : 00.00.00.00.00.00.00.00] with 1 providers
2015-06-17 00:27:13.647 cwc: 127.0.0.1:10002: Provider ID #1: 0x000000 00.00.00.00.00.00.00.00
2015-06-17 00:27:13.647 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a Griffin-card [0x5581 : 55.81.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.647 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a 0x4a00-card [0x4aee : 4a.ee.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.647 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.648 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.04.00.d3.00] with one Provider ID 0x000004
2015-06-17 00:27:13.648 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.10.00.d3.00] with one Provider ID 0x000010
2015-06-17 00:27:13.648 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.14.00.d3.00] with one Provider ID 0x000014
2015-06-17 00:27:13.648 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.20.00.d3.00] with one Provider ID 0x000020
2015-06-17 00:27:13.648 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.c0.00.d3.00] with one Provider ID 0x0000c0
2015-06-17 00:27:13.649 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.c4.00.d3.00] with one Provider ID 0x0000c4
2015-06-17 00:27:13.649 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.cc.00.d3.00] with one Provider ID 0x0000cc
2015-06-17 00:27:13.649 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.649 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.8c.00.d3.00] with one Provider ID 0x00008c
2015-06-17 00:27:13.650 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.a0.00.d3.00] with one Provider ID 0x0000a0
2015-06-17 00:27:13.650 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.a4.00.d3.00] with one Provider ID 0x0000a4
2015-06-17 00:27:13.650 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.a8.00.d3.00] with one Provider ID 0x0000a8
2015-06-17 00:27:13.650 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.658 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.04.00.d3.00] with one Provider ID 0x000004
2015-06-17 00:27:13.659 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.08.00.d3.00] with one Provider ID 0x000008
2015-06-17 00:27:13.659 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.24.00.d3.00] with one Provider ID 0x000024
2015-06-17 00:27:13.659 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.28.00.d3.00] with one Provider ID 0x000028
2015-06-17 00:27:13.659 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d05 : 0d.05.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.659 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d05 : 0d.05.00.00.04.00.d3.00] with one Provider ID 0x000004
2015-06-17 00:27:13.659 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d05 : 0d.05.00.00.10.00.d3.00] with one Provider ID 0x000010
2015-06-17 00:27:13.659 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a NDS-card [0x090f : 09.0f.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.659 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a Viaccess-card [0x0500 : 05.00.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.660 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a Viaccess-card [0x0500 : 05.00.03.0b.00.00.d3.00] with one Provider ID 0x030b00
2015-06-17 00:27:13.660 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a Viaccess-card [0x0500 : 05.00.1f.1f.1f.00.d3.00] with one Provider ID 0x1f1f1f
2015-06-17 00:27:13.660 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.660 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.04.00.d3.00] with one Provider ID 0x000004
2015-06-17 00:27:13.660 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.10.00.d3.00] with one Provider ID 0x000010
2015-06-17 00:27:13.660 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.14.00.d3.00] with one Provider ID 0x000014
2015-06-17 00:27:13.661 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.20.00.d3.00] with one Provider ID 0x000020
2015-06-17 00:27:13.661 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.c0.00.d3.00] with one Provider ID 0x0000c0
2015-06-17 00:27:13.661 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.c4.00.d3.00] with one Provider ID 0x0000c4
2015-06-17 00:27:13.661 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d00 : 0d.00.00.00.cc.00.d3.00] with one Provider ID 0x0000cc
2015-06-17 00:27:13.661 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.661 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.8c.00.d3.00] with one Provider ID 0x00008c
2015-06-17 00:27:13.662 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.a0.00.d3.00] with one Provider ID 0x0000a0
2015-06-17 00:27:13.662 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.a4.00.d3.00] with one Provider ID 0x0000a4
2015-06-17 00:27:13.662 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d02 : 0d.02.00.00.a8.00.d3.00] with one Provider ID 0x0000a8
2015-06-17 00:27:13.662 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.662 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.04.00.d3.00] with one Provider ID 0x000004
2015-06-17 00:27:13.662 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.08.00.d3.00] with one Provider ID 0x000008
2015-06-17 00:27:13.662 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.24.00.d3.00] with one Provider ID 0x000024
2015-06-17 00:27:13.663 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d03 : 0d.03.00.00.28.00.d3.00] with one Provider ID 0x000028
2015-06-17 00:27:13.663 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d05 : 0d.05.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.663 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d05 : 0d.05.00.00.04.00.d3.00] with one Provider ID 0x000004
2015-06-17 00:27:13.663 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a CryptoWorks-card [0x0d05 : 0d.05.00.00.10.00.d3.00] with one Provider ID 0x000010
2015-06-17 00:27:13.663 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a NDS-card [0x090f : 09.0f.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.663 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a Viaccess-card [0x0500 : 05.00.00.00.00.00.d3.00] with one Provider ID 0x000000
2015-06-17 00:27:13.663 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a Viaccess-card [0x0500 : 05.00.03.0b.00.00.d3.00] with one Provider ID 0x030b00
2015-06-17 00:27:13.664 cwc: 127.0.0.1:10002: Connected as user tvheadend2 to a Viaccess-card [0x0500 : 05.00.1f.1f.1f.00.d3.00] with one Provider ID 0x1f1f1f

cilin dro

thanks for your quick response. As soon as I get home I try it and let you know. I ask "keep alive" i put disabled and enable "mgclient" instead?

cilin dro

saen acro wrote:
> oscam.conf
> [...]
> create user for Tvheadend
> restart oscam
>
> go to Tvheadend
> Configuration >CAs >ADD
> cwc (newcamd)
> add ip or dns name for oscam
> use name pass an DES key
> check enable
> open debug window in bottom
> click save and if it is ok in log ypu mus see someting as
> [...]

This is what came out. But I can not do anyway resharing. any sugestion?

2015-06-17 02:22:18.012 cwc: 127.0.0.1:12000: Connected as user test to a NagraVision-card [0x1816 : 00.00.00.00.00.00.00.00] with 1 providers
2015-06-17 02:22:18.013 cwc: 127.0.0.1:12000: Provider ID #1: 0x000101 00.00.00.00.00.00.00.00
2015-06-17 02:22:18.013 cwc: 127.0.0.1:12000: Connected as user test to a NagraVision-card [0x1816 : 18.16.00.01.01.00.d3.00] with one Provider ID 0x000101
2015-06-17 02:38:47.802 subscription: 0022: "24.139.143.60 [ Kodi Media Center ]" unsubscribing from "5-MAX", hostname="24.139.143.60", username="", client="Kodi Media Center"
2015-06-17 02:38:48.205 mpegts: 12326.6L in dish2 - tuning on TurboSight TBS 6985 DVBS/S2 frontend : DVB-S #0
2015-06-17 02:38:48.361 subscription: 0023: "24.139.143.60 [ Kodi Media Center ]" subscribing on "A&E", weight: 150, adapter: "TurboSight TBS 6985 DVBS/S2 frontend : DVB-S #0", network: "dish2", mux: "12326.6L", provider: "A&E", service: "A&E", hostname="24.139.143.60", username="", client="Kodi Media Center"
2015-06-17 02:38:53.249 descrambler: cannot decode packets for service "A&E"

2015-06-17 02:38:53.588 cwc: Got unexpected ECM reply (seqno: 433)

My configuration again.

oscam.config

[global]
logfile = /var/log/oscam/oscam.log
clienttimeout = 30000
nice = -1
waitforcards = 0
block_same_ip = 0
block_same_name = 0
usrfile = /var/log/oscam/oscamuser.log

cwlogdir = /var/log/oscam/cw

[cache]

max_time = 33

[newcamd]
port = 12000@1816:000101
allowed = 127.0.0.1,24.139.93.113
key = 0102030405060708091011121314

mgclient = 1

[cccam]
port = 13000
serverip = 127.0.0.1
nodeid = 2E6758AC100713E4
version = 2.0.11
reshare_mode = 3

ignorereshare = 1

[webif]
httpport = 8888
httpuser = root
httppwd = root

httpallowed = 1.1.1.1-254.254.254.254,127.0.0.1

oscam.server

[reader]
label = test
description = test
protocol = newcamd
device = xxxxx.xxxxxxx.xxxx,20000
key = 0102030405060708091011121314
user = xxxxxxxx
password = xxxxxxxx
connectoninit = 1
fallback = 1
caid = 1816
ident = 1816:000101
group = 1

cccreshare = 1

oscam.user

[account]
user = test
pwd = test
description = PREMIUM
caid = 1816
keepalive = 1
au = 1
betatunnel = 1840.FFFF:1816
group = 1
ident = 1816:000101

Saen Acro

oscam.config


[newcamd]
port = 12000@1816:000000
key = 0102030405060708091011121314
mgclient = 1

oscam.server


[reader]
label = test
description = test
protocol = newcamd
device = xxxxx.xxxxxxx.xxxx,20000
key = 0102030405060708091011121314
user = xxxxxxxx
password = xxxxxxxx
disableserverfilter           = 1
group = 1

oscam.user


[account]
user = test
pwd = test
description = PREMIUM
keepalive = 1
group = 1

cilin dro

saen acro wrote:
> oscam.config
>
> [...]
>
> oscam.server
>
> [...]
>
>
> oscam.user
>
> [...]

If i try this port settings wont run 1816:000000 but run with 1816:000101

oscam.config

[newcamd]
port = 12000@1816:000000
key = 0102030405060708091011121314

mgclient = 1

with user account i dont have problems

oscam.user

[account]
user = test
pwd = test
description = PREMIUM
keepalive = 1

group = 1

With the reader if i enable disableserverfilter osacam wont run

oscam.server

[reader]
label = test
description = test
protocol = newcamd
device = xxxxx.xxxxxxx.xxxx,20000
key = 0102030405060708091011121314
user = xxxxxxxx
password = xxxxxxxx
disableserverfilter = 1

group = 1

When the second client try any channel always says
2015-06-17 18:09:38.000 webui: Couldn't start streaming /stream/channel/95133fa4f0fa08bac3f374bfa6dae874, No free adapter

Saen Acro

luis rios wrote:
> When the second client try any channel always says

> 2015-06-17 18:09:38.000 webui: Couldn't start streaming /stream/channel/95133fa4f0fa08bac3f374bfa6dae874, No free adapter

This have nothing connected to descrambling and oscam
if you have one tuner second user can open channels from same transponder

cilin dro

saen acro wrote:
> luis rios wrote:
> > When the second client try any channel always says
> > 2015-06-17 18:09:38.000 webui: Couldn't start streaming /stream/channel/95133fa4f0fa08bac3f374bfa6dae874, No free adapter
>
> This have nothing connected to descrambling and oscam

> if you have one tuner second user can open channels from same transponder

I could see that if I open the channels that are within the same transporder 2 or more clients can watch channels. I have to use a tunnel per transporder?

Saen Acro

Depend of what you want and how to see put more tuners
but one tuner for one transponder in same time

cilin dro

I am seeking that several people can watch different channels at the same time. I have 2 tbs 6985.I have to use one transporder per tunnel right?

Saen Acro

>I have to use one transponder per tunnel right?

Correct

Imagine transponder as book with few pictures on page
it is impossible to see pictures on next page, until switch page.

cilin dro

I thank you, for helped me and clarify my doubts. As you can see that you were the only answer in this post. I really appreciate it, Thankyou very much.

sirk98 qwerty98

Hello,

I've a similare issue...
I've installed tvheadend latest unstable revision on ubuntu server with oscam for the descrambling and I give more test with two vlc client's .
But I can't see two different channels encrypted .

Here the log for two channel, the first Crypted and others Free :

2015-08-28 13:19:36.695 TS: IT_00/706MHz/Premium Cinema HD: H264

 #1440 Continuity counter error (total 36)
2015-08-28 13:19:37.799 TS: IT_00/706MHz/Premium Cinema HD: AC3

#1445 Continuity counter error (total 4) 2015-08-28 13:19:38.004 descrambler: ECM late (8 seconds) for service "Premium Cinema HD" 2015-08-28 13:19:39.092 TS: IT_00/706MHz/Sportitalia: MPEG2VIDEO
#1690 Continuity counter error (total 32) 2015-08-28 13:19:42.100 TS: IT_00/706MHz/Premium Cinema HD Transport error indicator (total 143)* Log from two client with the same encrypted channel : *2015-08-28 13:21:50.162 TS: IT_00/706MHz/Premium Cinema HD: H264
#1440 Continuity counter error (total 443) 2015-08-28 13:21:54.163 TS: IT_00/706MHz/Premium Cinema HD Transport error indicator (total 1145) 2015-08-28 13:21:56.188 TS: IT_00/706MHz/Premium Cinema HD: AC3
#1445 Continuity counter error (total 44) 2015-08-28 13:21:57.045 TS: IT_00/706MHz/Premium Cinema HD: MPEG2AUDIO
#1442 Continuity counter error (total 17) 2015-08-28 13:21:58.002 descrambler: ECM late (8 seconds) for service "Premium Cinema HD" 2015-08-28 13:21:59.611 pass-eit: invalid checksum (len 48, errors 10) 2015-08-28 13:21:59.612 pass-eit: invalid checksum (len 48, errors 3)

Log from two client with different encrypted channels:

2015-08-28 13:23:40.048 TS: IT_00/706MHz/Premium Cinema HD: H264

 #1440 Continuity counter error (total 1037)
2015-08-28 13:23:40.532 TS: IT_00/706MHz/Premium Cinema HD: AC3

#1445 Continuity counter error (total 99) 2015-08-28 13:23:44.028 TS: IT_00/706MHz/Premium Cinema HD Transport error indicator (total 2657) 2015-08-28 13:23:46.027 TS: IT_00/706MHz/Premium Cinema 2 HD Transport error indicator (total 964) 2015-08-28 13:23:48.004 descrambler: ECM late (8 seconds) for service "Premium Cinema HD" 2015-08-28 13:23:49.677 pass-eit: invalid checksum (len 486, errors 23)

In this log probably occur a problem with a signal power/quality, but however I can't watch two encrypted channels at same time...

What's going on ?

oscam.conf

#second test
[newcamd]
port = 4054@1805:000000
key = AAAAAA666666BBBBBBB9999999CC
keepalive = 1

mgclient = 1

#first test, not used at moment
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
listen_port = 9001
delayer = 1000
user = dvb_api
read_sdt = 1
write_sdt_prov = 1

boxtype = pc

oscam.user
[account]
user = dvb_api
keepalive = 0
au = 1
emmreassembly = 1

group = 1

[account]
user = user
pwd = user
caid = 1805

group = 1

Thx for any advice,

regards

sirk98 qwerty98

Hello,

after a lot of test, I'm not able to watch two or more encrypted channels from the same MUX with a single Adapter at same time...
( oscam is connected with dvb_api and the rev is major as 11000 )
Can some one help me ?
With FTA channels no problem .