How to configure DiseqC switch?

Alex Mansson

Hi all,

Im running Openelec on a Raspberry Pi 2 and TVHeadend 3.9.2765. I have 2 x "Technisat Skystar 2 USB CI HD" tuners and using a total of 4 LNB's.

The one tuner is running in a unicable configuration on Astra 19.2 - This is working fine

The second tuner is connected to a 4 port DiseqC 2.0 switch. Port 1 is connected to Eurobird 28.5 and port 2 is connected to Hotbird 13.0

I have following this guide to setup the DseqC switch configuration: http://wetekforums.com/vb5/forum/wetek-play/linux/openelec/tutorials-aa/638-tvheadend-tutorial-emp-profiline-diseqc-relais-9-1-p-168-w

I dont seem to be getting the switch to work correctly as I get no signal from the LNB. If I try long enough I do get a signal from one of the LNB's but as soon as I select the second LNB I dont get a signal at all.

I have also tested by selecting the LNB type "4 port switch" and "2 port switch" but there is no difference.

I feel I am missing something.... does anyone else have a similar configuration?

thanks

blingal

Anthony Thomas

Things might have changed since this version - HTS Tvheadend 3.9.2509~ga50f74c

But here's a shot of my old Diseqc settings.