may be you should try to use better word , i mean network in the sentence : Network Discovery is the process through which tvh looks for muxes on the defined network. You want that enabled.
does it mean network of the pc : the card setting i created , or it can be a tv card on the network aka lan...
muxes seems to be the channels , i have plenty for the dvb-t card - network , only one for the dvb-s2
for the muxes , you should try to use loading files , where i my home is , i get a lot of channels [around 90 with w_scan , right now in the morning ]
the file tnt full is the resulting file , i would have use it to select muxes but your max is below 600 while frequencies i get are below 800 so there is a big range missing
http://s28.postimg.org/5y1po3zot/tvheadend_03.jpg
the quality of them depends a lot of the weather , by the way i am obliged to edit by hand the resultings scan .
with dvb-s2 it is even worse with satellite having more than 1 k of channels and soon 2k channels , so a selection file will be needed , also because there are a lot of parameters to use
i tried to use w_scan for dvb-s discovery but the console failed with message :
trying 'S f = 12663 kHz H SR = 22000 5/6 0,35 QPSK'
(time: 04:32)
trying 'S2 f = 12670 kHz V SR = 22000 2/3 0,35 8PSK'
(time: 04:35)
trying 'S f = 12692 kHz H SR = 22000 5/6 0,35 QPSK'
(time: 04:38)
trying 'S f = 12699 kHz V SR = 22000 5/6 0,35 QPSK'
(time: 04:41)
trying 'S f = 12722 kHz H SR = 22000 5/6 0,35 QPSK'
(time: 04:44)
trying 'S f = 12729 kHz V SR = 22000 5/6 0,35 QPSK'
(time: 04:47)
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!
i launched : w_scan -f s -s S19E2 -L
for tnt it was : w_scan -f 1 -c FR -L
it did not made any files but showed the file content on monitor so i used a copy and paste to create file....that vlc is not able to read because he use first dvb tuner that is dvb-s ...
may be you know the setting to add for vlc to use the right tuner and card ?