Hi,
I am atm setting up my sat config with a diseqc multiswitch and 4 LMB's.
Setting up the card is done, setup the 4 LMB to Astra 19->0 Astra 28 ->1 Astra 23 ->2 Hotbord 13 ->3
As i was adding the LMB to the DVB networks i noticed Astra 19.2E showed Muxes:1 Muxes awaiting initial scan:1 so i added my second DVB network Astra 28.
Currently tuned to: changed immediately to Astra 23 with Muxes:89 and Muxes awaiting initial scan: starting to countdown.
My question is do I need to wait longer between adding DVB networks to let tvheadend scan the whole range of the satellite or can I just add all 4 and they will be correctly scanned anyway ?
It's just a bit confusing and may be the issue i had with the Astra 19 only showing 1 frequency.
Small update: I found the problem of the Astra 19.2 only finding 1 frequency, the file /home/<user>/tvheadend/data/dvb-scan/dvb-s/Astra 19.2E only contains 1 frequency.
I am assuming these are the files tvheadend looks at when scanning.
I renamed Astra-19.2E and Hotbird-13.0E as .backup files and replaced them with the files found in this post:
https://www.lonelycoder.com/redmine/issues/1237#change-5505
A rejected [bug] but at least it contains the Astra 19.2E frequencies i am missing. ( same for updated frequencies for Hotbird 13.0E.
Second update: As i read more i get now that you use an online source to retrieve the mux information. As such the remote host has incomplete and/or outdated data and is the case of the single frequency on astra 19.2E and 5 error readings on Astra 23.5E.
I am skipping mux detection for 19.2E for now, disabled the 5 faulty frequencies on 23.5E restarted tvheadend to re-scan to see if i can get an enabled Map DVB services to channels.
cheers,
Bart