Hello,
I have exact the same error, 5 times a mux isn't valid with a line like:
Sep 26 18:59:27 dvb: "/dev/dvb/adapter0" tuning to "12,661,000 kHz Horizontal (Astra 23)" -- Front configuration failed -- Invalid argument, frequency: 206100
And i will not get "map DVB services to channels" button to enable.
I looked up all 5 frequencies and de-selected them from the Multiplexes page,saved the settings like that and restarted tvheadend ( sudo /etc/init.d/tvheadend restart ), it rescans the whole range again :( ( 4 sats is a very long wait )
To tell you upfront, i am not a linux wiz, i know the basics but that's it.
At the moment the system is again rescanning the whole range ( there goes another hour or two ) but my guess will be that the button won't get enabled again.
I'll add comments on that outcome as soon it is finished, in the meantime a request to have some error detection placed to skip over these time consuming errors.
Setup on which it runs :
MSI Ms-7529 motherboard ( intel chipset ) 1.9Ghz core 2 Duo with 2GB DDR2 ram.
Nvidia GT610 using the HDMI + audio to feed my TV.
Technisat 2HD PCI card connected to a DiSEqC switch with 4 LMB's
Software:
XBMCbuntu 11.0 downloaded 26-sep.
after which i ran :
sudo apt-get install nvidia-current-updates ( nvidia card update )
sudo add-apt-repository ppa:pulse-eight/pulse
sudo apt-get update
sudo apt-get install xbmc tvheadend xbmc-bin (getting the tvheadend version : HTS Tvheadend 2.99.53.4502158 )
score atm :
MUX's: 215
Muxes to scan : 137