Problem:
I want to set up Tvheadend on a Raspberry Pi 2 with Archlinux because Archlinux is the fastest system booting and running. IMHO all hardware and drivers are ok. The log files and protocols are below. Tvheadend is unable to do a channel scan. When I choose the satellite Astra 19.2 and set the other suggested options and click the Save button nothing happens. Nothing appears under "Currently tuned to" or "Muxes" or "Muxes awaiting initial scan"!
A test with LXDE/Kaffeine was succesfull. Kaffeine finds all the needed channels. I've tested the same Pi Board with Raspbian and it runs Tvheadend without any problem. I don't know whether Archlinux or Tvheadend is the problem. Maybe anayone has some experiences with that combination and can help. What is wrong?
Hardware:
Raspberry Pi 2
Tevii S660 USB S2 Revćeiver
OS:
Linux alarmpi 3.18.6-2-ARCH #1 SMP PREEMPT Sun Feb 8 09:40:23 MST 2015 armv7l GNU/Linux
Tvheadend version:
at Pi 2 compiled tvheadend-3.4.27-2-armv7h.pkg.tar.xz
using this Howto: http://kodi.wiki/view/HOW-TO:Install_Tvheadend_on_Arch_Linux
Content of lsusb:
Bus 001 Device 004: ID 9022:d660 TeVii Technology Ltd. DVB-S2 S660
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Content of lsmod:
Module Size Used by
rpcsec_gss_krb5 21136 0
evdev 9464 0
rc_tevii_nec 1180 0
ts2020 4274 1
ds3000 11971 1
dvb_usb_dw2102 40541 0
dvb_usb 18283 1 dvb_usb_dw2102
dvb_core 90917 1 dvb_usb
rc_core 21274 4 dvb_usb,rc_tevii_nec,dvb_usb_dw2102
leds_gpio 3530 0
led_class 4035 1 leds_gpio
uio_pdrv_genirq 3281 0
uio 8710 1 uio_pdrv_genirq
sch_fq_codel 7252 2
snd_bcm2835 20881 2
snd_pcm 86661 2 snd_bcm2835
snd_timer 19608 1 snd_pcm
snd 60836 6 snd_bcm2835,snd_timer,snd_pcm
bcm2708_rng 1143 0
rng_core 5666 1 bcm2708_rng
ipv6 342650 40
Content of dmesg | grep dvb
[ 9.625954] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 9.716657] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 9.849739] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 9.856621] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 9.955173] dvb-usb: MAC address: 00:18:bd:5b:61:d1
[ 10.104610] dvb-usb: schedule remote query interval to 150 msecs.
[ 10.112744] dvb-usb: TeVii S660 USB successfully initialized and connected.
Content of journalctl | grep tvheadend
Feb 12 12:08:40 alarmpi systemd[1]: Started tvheadend.
Feb 12 12:08:40 alarmpi tvheadend[271]: charset: 71 entries loaded
Feb 12 12:08:40 alarmpi tvheadend[271]: dvb: Found adapter /dev/dvb/adapter0 (Montage Technology DS3000) via USB (480 Mbit/s)
Feb 12 12:08:40 alarmpi tvheadend[271]: dvb: Adapter /dev/dvb/adapter0 will run in filtered mode
Feb 12 12:08:40 alarmpi tvheadend[271]: CSA: Using 32bit parallel descrambling
Feb 12 12:08:40 alarmpi tvheadend[271]: epggrab: module eit created
Feb 12 12:08:40 alarmpi tvheadend[271]: epggrab: module uk_freesat created
Feb 12 12:08:40 alarmpi tvheadend[271]: epggrab: module uk_freeview created
Feb 12 12:08:40 alarmpi tvheadend[271]: epggrab: module viasat_baltic created
Feb 12 12:08:40 alarmpi tvheadend[271]: epggrab: module opentv-ausat created
Feb 12 12:08:40 alarmpi tvheadend[271]: epggrab: module opentv-skyit created
Feb 12 12:08:40 alarmpi tvheadend[271]: epggrab: module opentv-skyuk created
Feb 12 12:08:40 alarmpi tvheadend[271]: epggrab: module pyepg created
Feb 12 12:08:40 alarmpi tvheadend[271]: epggrab: module xmltv created
Feb 12 12:08:40 alarmpi tvheadend[271]: epgdb: loaded v2
Feb 12 12:08:40 alarmpi tvheadend[271]: epgdb: channels 0
Feb 12 12:08:40 alarmpi tvheadend[271]: epgdb: brands 0
Feb 12 12:08:40 alarmpi tvheadend[271]: epgdb: seasons 0
Feb 12 12:08:40 alarmpi tvheadend[271]: epgdb: episodes 0
Feb 12 12:08:40 alarmpi tvheadend[271]: epgdb: broadcasts 0
Feb 12 12:08:40 alarmpi tvheadend[271]: dvr: Creating new configuration ''
Feb 12 12:08:40 alarmpi tvheadend[271]: START: HTS Tvheadend version started, running as PID:271 UID:1337 GID:91, settings located in '/home/hts/.hts/tvheadend'
Feb 12 12:08:41 alarmpi tvheadend[271]: AVAHI: Service 'Tvheadend' successfully established.
Content of Web-Interface Tvheadend
Main Window: Configuration -> TV Adapters - General
Sub-Window: Information and Capabilities shows:
Hardware
Device path:
/dev/dvb/adapter0
Device name:
Montage Technology DS3000
Host connection:
USB (480 Mbit/s)
Intermediate Frequency range:
950000 kHz - 2150000 kHz, in steps of 1011 kHz
Symbolrate range:
1000000 Baud - 45000000 Baud
Status
Currently tuned to:
Services:
0
Muxes:
0
Muxes awaiting initial scan:
0
Signal Strength:
0%
Bit Error Rate:
0/s
Uncorrected Bit Errors:
0/s
Any idea?
<<