No response from them I am guessing being new year they probably are still on holiday.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.35-amd64 (root@TVSERVER) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Thu Jan 1 20:38:49 GMT 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.35-amd64 root=UUID=88b9e2a8-c5b3-4b96-ac2f-2f3bd91b01c9 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf5dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cf5e0000-0x00000000cf5e2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cf5e3000-0x00000000cf5effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cf5f0000-0x00000000cf5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. G33M-DS2R/G33M-DS2R, BIOS F7 11/22/2007
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CAFFF write-protect
[ 0.000000] CB000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0CF800000 mask FFF800000 uncachable
[ 0.000000] 4 base 0CF700000 mask FFFF00000 uncachable
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 130000000 mask FF0000000 uncachable
[ 0.000000] 7 base 0CF600000 mask FFFF00000 write-through
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xcf5e0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f5600-0x000f560f] mapped at [ffff8800000f5600]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01855000, 0x01855fff] PGTABLE
[ 0.000000] BRK [0x01856000, 0x01856fff] PGTABLE
[ 0.000000] BRK [0x01857000, 0x01857fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01858000, 0x01858fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcf5dffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcf3fffff] page 2M
[ 0.000000] [mem 0xcf400000-0xcf5dffff] page 4k
[ 0.000000] RAMDISK: [mem 0x36aa4000-0x37549fff]
[ 0.000000] ACPI: RSDP 00000000000f6fb0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cf5e3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cf5e30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cf5e3180 0561E (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000cf5e0000 00040
[ 0.000000] ACPI: HPET 00000000cf5e8900 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cf5e8980 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000cf5e8800 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000cf5e8a00 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 00000000cf5e8fb0 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fff8000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012b600000-ffff88012effffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcf5dffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1045885
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11557 pages used for memmap
[ 0.000000] DMA32 zone: 845280 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5e0000-0xcf5e2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5e3000-0xcf5effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf5f0000-0xcf5fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf600000-0xcf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu
ffff88012fc00000 s76672 r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s76672 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031563
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.35-amd64 root=UUID=88b9e2a8-c5b3-4b96-ac2f-2f3bd91b01c9 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4037856K/4183540K available (3621K kernel code, 610K rwdata, 1516K rodata, 872K init, 880K bss, 145684K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2400.081 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.16 BogoMIPS (lpj=9600324)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004054] Security Framework initialized
[ 0.004061] AppArmor: AppArmor disabled by boot time parameter
[ 0.008220] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011076] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012467] Mount-cache hash table entries: 256
[ 0.012738] Initializing cgroup subsys devices
[ 0.012743] Initializing cgroup subsys freezer
[ 0.012746] Initializing cgroup subsys net_cls
[ 0.012748] Initializing cgroup subsys blkio
[ 0.012750] Initializing cgroup subsys perf_event
[ 0.012778] CPU: Physical Processor ID: 0
[ 0.012779] CPU: Processor Core ID: 0
[ 0.012782] mce: CPU supports 6 MCE banks
[ 0.012789] CPU0: Thermal monitoring enabled (TM2)
[ 0.012798] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.012798] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[ 0.012798] tlb_flushall_shift: -1
[ 0.012868] Freeing SMP alternatives memory: 12K (ffffffff81774000 - ffffffff81777000)
[ 0.012871] ACPI: Core revision 20130725
[ 0.015319] ACPI: All ACPI Tables successfully acquired
[ 0.016474] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057651] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600
2.40GHz (fam: 06, model: 0f, stepping: 0b)
[ 0.060000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.060000] perf_event_intel: PEBS disabled due to CPU errata
[ 0.060000] ... version: 2
[ 0.060000] ... bit width: 40
[ 0.060000] ... generic registers: 2
[ 0.060000] ... value mask: 000000ffffffffff
[ 0.060000] ... max period: 000000007fffffff
[ 0.060000] ... fixed-purpose events: 3
[ 0.060000] ... event mask: 0000000700000003
[ 0.068100] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060000] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.095868] Brought up 4 CPUs
[ 0.095872] smpboot: Total of 4 processors activated (19200.64 BogoMIPS)
[ 0.096203] devtmpfs: initialized
[ 0.104846] PM: Registering ACPI NVS region [mem 0xcf5e0000-0xcf5e2fff] (12288 bytes)
[ 0.104846] regulator-dummy: no parameters
[ 0.104846] NET: Registered protocol family 16
[ 0.104846] cpuidle: using governor ladder
[ 0.104846] cpuidle: using governor menu
[ 0.104846] ACPI: bus type PCI registered
[ 0.104846] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.104846] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000)
[ 0.104846] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820
[ 0.104895] PCI: Using configuration type 1 for base access
[ 0.105723] bio: create slab <bio-0> at 0
[ 0.105723] ACPI: Added
OSI(Module Device)
[ 0.105723] ACPI: Added OSI(Processor Device)
[ 0.105723] ACPI: Added
OSI(3.0 SCP Extensions)
[ 0.105723] ACPI: Added
OSI(Processor Aggregator Device)
[ 0.105723] ACPI: EC: Look up EC in DSDT
[ 0.112026] ACPI: SSDT 00000000cf5e8e00 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.112203] ACPI: Dynamic OEM Table Load:
[ 0.112206] ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.112292] ACPI: SSDT 00000000cf5e8e90 00087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.112456] ACPI: Dynamic OEM Table Load:
[ 0.112458] ACPI: SSDT (null) 00087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 0.112542] ACPI: SSDT 00000000cf5e8f20 00087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.112706] ACPI: Dynamic OEM Table Load:
[ 0.112708] ACPI: SSDT (null) 00087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 0.112876] ACPI: Interpreter enabled
[ 0.112885] ACPI Exception: AENOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.112889] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.112904] ACPI: (supports S0 S3 S4 S5)
[ 0.112906] ACPI: Using IOAPIC for interrupt routing
[ 0.112941] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.113066] ACPI: No dock devices found.
[ 0.119605] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.119611] acpi PNP0A03:00: ACPI
OSC support notification failed, disabling PCIe ASPM
[ 0.119614] acpi PNP0A03:00: Unable to request OSC control (_OSC support mask: 0x08)
[ 0.119699] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.119702] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.119705] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.119707] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.119710] acpi PNP0A03:00: host bridge window [mem 0xcf600000-0xfebfffff] (ignored)
[ 0.119713] PCI: root bus 00: using default resources
[ 0.119895] PCI host bridge to bus 0000:00
[ 0.119899] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.119902] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.119905] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.119914] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.120030] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[ 0.120040] pci 0000:00:02.0: reg 0x10: [mem 0xf3100000-0xf317ffff]
[ 0.120046] pci 0000:00:02.0: reg 0x14: [io 0xe200-0xe207]
[ 0.120052] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff pref]
[ 0.120057] pci 0000:00:02.0: reg 0x1c: [mem 0xf3000000-0xf30fffff]
[ 0.120198] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.120237] pci 0000:00:1a.0: reg 0x20: [io 0xe300-0xe31f]
[ 0.120328] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.120375] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.120414] pci 0000:00:1a.1: reg 0x20: [io 0xe000-0xe01f]
[ 0.120504] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.120551] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.120589] pci 0000:00:1a.2: reg 0x20: [io 0xe100-0xe11f]
[ 0.120679] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.120726] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.120742] pci 0000:00:1a.7: reg 0x10: [mem 0xf3184000-0xf31843ff]
[ 0.120863] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.120908] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.120923] pci 0000:00:1b.0: reg 0x10: [mem 0xf3180000-0xf3183fff 64bit]
[ 0.120984] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.121047] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.121089] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.121151] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.121215] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.121259] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.121321] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.121386] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.121428] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.121489] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.121553] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.121597] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.121635] pci 0000:00:1d.0: reg 0x20: [io 0xe400-0xe41f]
[ 0.121726] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.121768] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.121806] pci 0000:00:1d.1: reg 0x20: [io 0xe500-0xe51f]
[ 0.121896] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.121938] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.121977] pci 0000:00:1d.2: reg 0x20: [io 0xe600-0xe61f]
[ 0.122067] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.122114] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.122130] pci 0000:00:1d.7: reg 0x10: [mem 0xf3185000-0xf31853ff]
[ 0.122251] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.122294] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.122391] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.122437] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.122510] pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
[ 0.122515] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.122519] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.122523] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.122647] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.122664] pci 0000:00:1f.2: reg 0x10: [io 0xe700-0xe707]
[ 0.122672] pci 0000:00:1f.2: reg 0x14: [io 0xe800-0xe803]
[ 0.122680] pci 0000:00:1f.2: reg 0x18: [io 0xe900-0xe907]
[ 0.122687] pci 0000:00:1f.2: reg 0x1c: [io 0xea00-0xea03]
[ 0.122695] pci 0000:00:1f.2: reg 0x20: [io 0xeb00-0xeb1f]
[ 0.122703] pci 0000:00:1f.2: reg 0x24: [mem 0xf3186000-0xf31867ff]
[ 0.122744] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.122841] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.122855] pci 0000:00:1f.3: reg 0x10: [mem 0xf3187000-0xf31870ff 64bit]
[ 0.122875] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.123038] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.123043] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.123137] pci 0000:02:00.0: [197b:2368] type 00 class 0x010185
[ 0.123166] pci 0000:02:00.0: reg 0x10: [io 0xc000-0xc007]
[ 0.123180] pci 0000:02:00.0: reg 0x14: [io 0xc100-0xc103]
[ 0.123193] pci 0000:02:00.0: reg 0x18: [io 0xc200-0xc207]
[ 0.123207] pci 0000:02:00.0: reg 0x1c: [io 0xc300-0xc303]
[ 0.123221] pci 0000:02:00.0: reg 0x20: [io 0xc400-0xc40f]
[ 0.123344] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.123355] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.123359] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.123363] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf0ffffff]
[ 0.123444] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.123462] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.123492] pci 0000:03:00.0: reg 0x18: [mem 0xf2000000-0xf2000fff 64bit]
[ 0.123527] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.123603] pci 0000:03:00.0: supports D1 D2
[ 0.123606] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.123661] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.123670] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.123674] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.123679] pci 0000:00:1c.5: bridge window [mem 0xf1000000-0xf2ffffff]
[ 0.123755] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.123759] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.123767] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.123770] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.124453] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14
15)
[ 0.124521] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
[ 0.124587] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6
7 9 10 11 12 14 15)
[ 0.124653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
[ 0.124718] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
0, disabled.
[ 0.124787] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
[ 0.124854] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12
14 15)
[ 0.124920] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
[ 0.125018] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.125024] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.125060] Found 1 acpi root devices
[ 0.125131] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.125131] vgaarb: loaded
[ 0.125131] vgaarb: bridge control possible 0000:00:02.0
[ 0.125131] PCI: Using ACPI for IRQ routing
[ 0.130592] PCI: pci_cache_line_size set to 64 bytes
[ 0.130640] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.130642] e820: reserve RAM buffer [mem 0xcf5e0000-0xcfffffff]
[ 0.130792] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.130797] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.130801] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.132032] Switched to clocksource hpet
[ 0.134084] pnp: PnP ACPI init
[ 0.134097] ACPI: bus type PNP registered
[ 0.134276] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.134279] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.134282] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.134285] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.134288] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.134292] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.134306] pnp 00:01: [dma 4]
[ 0.134333] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.134423] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.134476] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.134510] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.134546] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.134944] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.135001] system 00:07: [io 0x0400-0x04bf] could not be reserved
[ 0.135005] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135254] system 00:08: [mem 0xd0000000-0xdfffffff] has been reserved
[ 0.135258] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135482] system 00:09: [mem 0x000cde00-0x000cffff] has been reserved
[ 0.135486] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.135489] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.135492] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.135495] system 00:09: [mem 0xcf5e0000-0xcf5fffff] could not be reserved
[ 0.135498] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.135501] system 00:09: [mem 0x00100000-0xcf5dffff] could not be reserved
[ 0.135505] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.135508] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.135512] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.135516] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.135519] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.135522] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.135525] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[ 0.135528] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.135576] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.135582] pnp: PnP ACPI: found 11 devices
[ 0.135584] ACPI: bus type PNP unregistered
[ 0.143769] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.143773] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.143781] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.143790] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03] add_size 200000
[ 0.143801] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
[ 0.143805] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.143808] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.143811] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.143814] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.143820] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf3200000-0xf33fffff]
[ 0.143824] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf3400000-0xf35fffff 64bit pref]
[ 0.143829] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf3600000-0xf37fffff 64bit pref]
[ 0.143833] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf3800000-0xf3afffff pref]
[ 0.143836] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.143840] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.143845] pci 0000:00:1c.0: bridge window [mem 0xf3200000-0xf33fffff]
[ 0.143849] pci 0000:00:1c.0: bridge window [mem 0xf3400000-0xf35fffff 64bit pref]
[ 0.143855] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.143858] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.143863] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf0ffffff]
[ 0.143868] pci 0000:00:1c.4: bridge window [mem 0xf3600000-0xf37fffff 64bit pref]
[ 0.143874] pci 0000:03:00.0: BAR 6: assigned [mem 0xf3800000-0xf380ffff pref]
[ 0.143877] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.143880] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.143885] pci 0000:00:1c.5: bridge window [mem 0xf1000000-0xf2ffffff]
[ 0.143889] pci 0000:00:1c.5: bridge window [mem 0xf3800000-0xf3afffff pref]
[ 0.143895] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.143898] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.143908] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.143911] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.143914] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.143916] pci_bus 0000:01: resource 1 [mem 0xf3200000-0xf33fffff]
[ 0.143919] pci_bus 0000:01: resource 2 [mem 0xf3400000-0xf35fffff 64bit pref]
[ 0.143922] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.143924] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf0ffffff]
[ 0.143927] pci_bus 0000:02: resource 2 [mem 0xf3600000-0xf37fffff 64bit pref]
[ 0.143930] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.143932] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf2ffffff]
[ 0.143935] pci_bus 0000:03: resource 2 [mem 0xf3800000-0xf3afffff pref]
[ 0.143937] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 0.143940] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.143942] pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.144072] NET: Registered protocol family 2
[ 0.144436] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.144677] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.144870] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.144911] TCP: reno registered
[ 0.144919] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.144954] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.145095] NET: Registered protocol family 1
[ 0.145109] pci 0000:00:02.0: Boot video device
[ 0.146439] PCI: CLS 32 bytes, default 64
[ 0.146485] Unpacking initramfs...
[ 0.382926] Freeing initrd memory: 10904K (ffff880036aa4000 - ffff88003754a000)
[ 0.382936] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.382940] software IO TLB [mem 0xcb5e0000-0xcf5e0000] (64MB) mapped at [ffff8800cb5e0000-ffff8800cf5dffff]
[ 0.383677] audit: initializing netlink socket (disabled)
[ 0.383704] type=2000 audit(1420292440.380:1): initialized
[ 0.399302] bounce pool size: 64 pages
[ 0.399309] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.399810] VFS: Disk quotas dquot_6.5.2
[ 0.399846] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.399953] msgmni has been set to 7907
[ 0.400356] alg: No test for stdrng (krng)
[ 0.400396] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.400400] io scheduler noop registered
[ 0.400402] io scheduler deadline registered
[ 0.400430] io scheduler cfq registered (default)
[ 0.400695] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.400846] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.400991] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.401073] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.401092] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.401127] intel_idle: does not run on family 6 model 15
[ 0.401173] GHES: HEST is not enabled!
[ 0.401253] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.401828] Linux agpgart interface v0.103
[ 0.401899] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 0.401917] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.403133] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.403287] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.403416] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.403419] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.403576] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.403680] mousedev: PS/2 mouse device common for all mice
[ 0.403719] rtc_cmos 00:03: RTC can wake from S4
[ 0.403842] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.403868] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.403918] drop_monitor: Initializing network drop monitor service
[ 0.404024] TCP: cubic registered
[ 0.404090] NET: Registered protocol family 10
[ 0.404316] mip6: Mobile IPv6
[ 0.404319] NET: Registered protocol family 17
[ 0.404336] Key type dns_resolver registered
[ 0.404627] registered taskstats version 1
[ 0.404908] regulator-dummy: disabling
[ 0.405100] rtc_cmos 00:03: setting system clock to 2015-01-03 13:40:41 UTC (1420292441)
[ 0.405163] PM: Hibernation image not present or could not be loaded.
[ 0.406233] Freeing unused kernel memory: 872K (ffffffff8169a000 - ffffffff81774000)
[ 0.406235] Write protecting the kernel read-only data: 6144k
[ 0.407512] Freeing unused kernel memory: 464K (ffff88000138c000 - ffff880001400000)
[ 0.408830] Freeing unused kernel memory: 532K (ffff88000157b000 - ffff880001600000)
[ 0.420713] udevd[67]: starting version 175
[ 0.425020] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.438702] ACPI: bus type USB registered
[ 0.438751] usbcore: registered new interface driver usbfs
[ 0.438765] usbcore: registered new interface driver hub
[ 0.442491] usbcore: registered new device driver usb
[ 0.443084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.443381] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.443548] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.443552] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.443561] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.443606] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e300
[ 0.443788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.443791] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.443794] usb usb1: Product: UHCI Host Controller
[ 0.443796] usb usb1: Manufacturer: Linux 3.12.35-amd64 uhci_hcd
[ 0.443798] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.443934] hub 1-0:1.0: USB hub found
[ 0.443942] hub 1-0:1.0: 2 ports detected
[ 0.444202] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.444206] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.444212] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.444254] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
[ 0.444318] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.444321] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444323] usb usb2: Product: UHCI Host Controller
[ 0.444326] usb usb2: Manufacturer: Linux 3.12.35-amd64 uhci_hcd
[ 0.444328] usb usb2: SerialNumber: 0000:00:1a.1
[ 0.444447] hub 2-0:1.0: USB hub found
[ 0.444458] hub 2-0:1.0: 2 ports detected
[ 0.444650] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.444654] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.444660] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 0.444695] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
[ 0.444747] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.444749] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444752] usb usb3: Product: UHCI Host Controller
[ 0.444754] usb usb3: Manufacturer: Linux 3.12.35-amd64 uhci_hcd
[ 0.444756] usb usb3: SerialNumber: 0000:00:1a.2
[ 0.444860] hub 3-0:1.0: USB hub found
[ 0.444867] hub 3-0:1.0: 2 ports detected
[ 0.445052] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.445056] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.445062] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.445097] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 0.445148] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.445151] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.445154] usb usb4: Product: UHCI Host Controller
[ 0.445156] usb usb4: Manufacturer: Linux 3.12.35-amd64 uhci_hcd
[ 0.445158] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.445310] hub 4-0:1.0: USB hub found
[ 0.445318] hub 4-0:1.0: 2 ports detected
[ 0.445518] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.445522] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.445529] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 0.445540] SCSI subsystem initialized
[ 0.445566] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e500
[ 0.445624] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.445626] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.445629] usb usb5: Product: UHCI Host Controller
[ 0.445631] usb usb5: Manufacturer: Linux 3.12.35-amd64 uhci_hcd
[ 0.445634] usb usb5: SerialNumber: 0000:00:1d.1
[ 0.445744] hub 5-0:1.0: USB hub found
[ 0.445753] hub 5-0:1.0: 2 ports detected
[ 0.445960] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.445964] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.445970] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 0.445995] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e600
[ 0.446064] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.446067] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.446070] usb usb6: Product: UHCI Host Controller
[ 0.446072] usb usb6: Manufacturer: Linux 3.12.35-amd64 uhci_hcd
[ 0.446074] usb usb6: SerialNumber: 0000:00:1d.2
[ 0.446199] hub 6-0:1.0: USB hub found
[ 0.446208] hub 6-0:1.0: 2 ports detected
[ 0.450603] libata version 3.00 loaded.
[ 0.452786] scsi0 : pata_jmicron
[ 0.454699] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.454726] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.455006] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 0.455246] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xffffc9000063a000, 00:1f:d0:21:81:e7, XID 18000000 IRQ 43
[ 0.455250] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 0.455924] scsi1 : pata_jmicron
[ 0.456110] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 16
[ 0.456113] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 16
[ 0.465863] ahci 0000:00:1f.2: version 3.0
[ 0.466030] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.466088] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.466128] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.466131] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 0.466136] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.508781] scsi2 : ahci
[ 0.508903] scsi3 : ahci
[ 0.509005] scsi4 : ahci
[ 0.509114] scsi5 : ahci
[ 0.509221] scsi6 : ahci
[ 0.509324] scsi7 : ahci
[ 0.509396] ata3: SATA max UDMA/133 abar m2048@0xf3186000 port 0xf3186100 irq 44
[ 0.509399] ata4: SATA max UDMA/133 abar m2048@0xf3186000 port 0xf3186180 irq 44
[ 0.509401] ata5: SATA max UDMA/133 abar m2048@0xf3186000 port 0xf3186200 irq 44
[ 0.509404] ata6: SATA max UDMA/133 abar m2048@0xf3186000 port 0xf3186280 irq 44
[ 0.509406] ata7: SATA max UDMA/133 abar m2048@0xf3186000 port 0xf3186300 irq 44
[ 0.509409] ata8: SATA max UDMA/133 abar m2048@0xf3186000 port 0xf3186380 irq 44
[ 0.644534] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS10, max UDMA/33
[ 0.684511] ata1.00: configured for UDMA/33
[ 0.686222] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS10 PQ: 0 ANSI: 5
[ 0.752039] usb 1-2: new full-speed USB device number 2 using uhci_hcd
[ 0.828031] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.912645] usb 1-2: New USB device found, idVendor=03f0, idProduct=a407
[ 0.912649] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 0.912653] usb 1-2: Product: HP Link-5 micro dongle
[ 0.912657] usb 1-2: Manufacturer: HP
[ 0.917820] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.925136] usbcore: registered new interface driver usbhid
[ 0.925138] usbhid: USB HID core driver
[ 0.926995] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input1
[ 0.927140] hid-generic 0003:03F0:A407.0001: input,hidraw0: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-2/input0
[ 0.927676] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.1/input/input2
[ 0.927795] hid-generic 0003:03F0:A407.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-2/input1
[ 1.160033] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.380026] tsc: Refined TSC clocksource calibration: 2399.999 MHz
[ 1.652029] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.684379] ata5.00: HPA detected: current 156299375, native 156301488
[ 1.684491] ata5.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133
[ 1.684496] ata5.00: 156299375 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.685410] ata5.00: configured for UDMA/133
[ 1.685554] scsi 4:0:0:0: Direct-Access ATA WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5
[ 2.004030] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.324029] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.380124] Switched to clocksource tsc
[ 2.644026] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.657154] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.657159] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.657352] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.657594] sd 4:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.657664] sd 4:0:0:0: [sda] Write Protect is off
[ 2.657668] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.657690] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.659258] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.659300] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.731842] sda: sda1 sda2 < sda5 >
[ 2.732251] sd 4:0:0:0: [sda] Attached SCSI disk
[ 3.033580] PM: Starting manual resume from disk
[ 3.033584] PM: Hibernation image partition 8:5 present
[ 3.033586] PM: Looking for hibernation image.
[ 3.033779] PM: Image not found (code -22)
[ 3.033782] PM: Hibernation image not present or could not be loaded.
[ 3.065637] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.484080] udevd[384]: starting version 175
[ 5.741221] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 5.741228] ACPI: Power Button [PWRB]
[ 5.741325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.741330] ACPI: Power Button [PWRF]
[ 5.872279] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
[ 5.960929] ehci-pci: EHCI PCI platform driver
[ 5.961098] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 5.961166] usb 1-2: USB disconnect, device number 2
[ 6.002225] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.150106] ACPI: Requesting acpi_cpufreq
[ 6.184220] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 6.184233] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 6.188140] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 6.188150] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf3184000
[ 6.200040] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 6.200103] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.200107] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.200111] usb usb7: Product: EHCI Host Controller
[ 6.200115] usb usb7: Manufacturer: Linux 3.12.35-amd64 ehci_hcd
[ 6.200118] usb usb7: SerialNumber: 0000:00:1a.7
[ 6.200263] hub 7-0:1.0: USB hub found
[ 6.200272] hub 7-0:1.0: 6 ports detected
[ 6.224074] hub 1-0:1.0: USB hub found
[ 6.224085] hub 1-0:1.0: 2 ports detected
[ 6.248105] hub 2-0:1.0: USB hub found
[ 6.248119] hub 2-0:1.0: 2 ports detected
[ 6.272083] hub 3-0:1.0: USB hub found
[ 6.272096] hub 3-0:1.0: 2 ports detected
[ 6.272362] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 6.344239] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 6.344249] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 6.348172] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 6.348206] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3185000
[ 6.360053] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.360115] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.360119] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.360121] usb usb8: Product: EHCI Host Controller
[ 6.360124] usb usb8: Manufacturer: Linux 3.12.35-amd64 ehci_hcd
[ 6.360126] usb usb8: SerialNumber: 0000:00:1d.7
[ 6.360241] hub 8-0:1.0: USB hub found
[ 6.360250] hub 8-0:1.0: 6 ports detected
[ 6.384080] hub 4-0:1.0: USB hub found
[ 6.384091] hub 4-0:1.0: 2 ports detected
[ 6.408097] hub 5-0:1.0: USB hub found
[ 6.408111] hub 5-0:1.0: 2 ports detected
[ 6.432102] hub 6-0:1.0: USB hub found
[ 6.432120] hub 6-0:1.0: 2 ports detected
[ 6.432593] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20130725/utaddress-251)
[ 6.432598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.432635] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.432809] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.449133] iTCO_vendor_support: vendor-support=0
[ 6.458638] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.458676] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0460)
[ 6.458836] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.552054] [drm] Initialized drm 1.1.0 20060810
[ 6.707438] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
[ 6.710027] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
[ 6.712473] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
[ 6.714629] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.900037] usb 1-2: new full-speed USB device number 3 using uhci_hcd
[ 7.035115] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.073043] usb 1-2: New USB device found, idVendor=03f0, idProduct=a407
[ 7.073049] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.073053] usb 1-2: Product: HP Link-5 micro dongle
[ 7.073057] usb 1-2: Manufacturer: HP
[ 7.079479] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.0/input/input6
[ 7.079618] hid-generic 0003:03F0:A407.0003: input,hidraw0: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-2/input0
[ 7.084033] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2:1.1/input/input7
[ 7.084236] hid-generic 0003:03F0:A407.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:1a.0-2/input1
[ 7.097362] [drm] Memory usable by graphics device = 512M
[ 7.097372] i915 0000:00:02.0: setting latency timer to 64
[ 7.097938] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 7.097947] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.097948] [drm] Driver supports precise vblank timestamp query.
[ 7.098000] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.098877] [drm] initialized overlay support
[ 7.152899] fbcon: inteldrmfb (fb0) is primary device
[ 7.193827] Console: switching to colour frame buffer device 160x64
[ 7.199358] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.199360] i915 0000:00:02.0: registered panic notifier
[ 7.199420] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.231156] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 7.249662] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 7.259321] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 7.259423] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 7.259520] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 7.259613] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.259707] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.259793] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.259883] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.259978] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.287089] coretemp coretemp.0: Using relative temperature scale!
[ 7.287113] coretemp coretemp.0: Using relative temperature scale!
[ 7.287134] coretemp coretemp.0: Using relative temperature scale!
[ 7.287144] coretemp coretemp.0: Using relative temperature scale!
[ 8.368171] Adding 3211260k swap on /dev/sda5. Priority:-1 extents:1 across:3211260k
[ 8.385479] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.624491] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.814102] loop: module loaded
[ 10.349320] r8169 0000:03:00.0 eth0: link down
[ 10.349338] r8169 0000:03:00.0 eth0: link down
[ 10.349345] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.565918] RPC: Registered named UNIX socket transport module.
[ 10.565923] RPC: Registered udp transport module.
[ 10.565925] RPC: Registered tcp transport module.
[ 10.565927] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.625008] FS-Cache: Loaded
[ 10.699874] FS-Cache: Netfs 'nfs' registered for caching
[ 10.842347] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.481475] r8169 0000:03:00.0 eth0: link up
[ 12.481488] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready