Hi everyone,
I'm currently trying to configure tvheadend backend with XBMC frontend with Terratec Cinergy DT USB XS Diversity.
I live in Paris (France) and the Terractec Cinergy DT USB XS DIversity works on Windows 7 x64, and can find and watch services :
http://puu.sh/cABl1/cc41d552bc.png
But I've the following problem :
When I boot on XBMCbuntu and try to find services on tvheadend, I can't find any of them.
The USB dongle is correctly recognised and initialised according to dmesg :
dvb-usb: found a 'Terratec Cinergy DT XS Diversity' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Terratec Cinergy DT XS Diversity' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy DT XS Diversity)
usb 2-1: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
MT2266: successfully identified
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy DT XS Diversity)
usb 2-1: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
MT2266: successfully identified
Registered IR keymap rc-dib0700-rc5
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc1/input23
rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/rc/rc1
dvb-usb: schedule remote query interval to 50 msecs.
dvb-usb: Terratec Cinergy DT XS Diversity successfully initialized and connected.
I tried with tvheadend installed using packaged and the compiled version (3.9.1991~g464383a) and I'm faced to the same issue.
Tvheadend can see my TV adapters:
http://puu.sh/cAB4n/b3727e8242.png
I create a Network and associated Muxes using Frequencies I found on Windows but the scan fail:
http://puu.sh/cABP8/dfaef04e5e.png
I tried with some other frequencies and tried with "scan" and "w_scan" but had the same result.
In "Status", I can see that I've a pretty good Signal Strength:
http://puu.sh/cABVm/a7d2dfa9fb.png
During scans, the SNR is at 1%.
Do you have any ideas of what could be wrong with my configuration?
Thanks !
Manu.