Hi Hein
OK, using scan "scan /usr/share/dvb/dvb-s/Astra-28.2E" has thrown up the fact that it cannot see the BBC HD transponder on 10847 V. The results are:
Network Name 'ASTRA'
>>> tune to: 10788:v:0:22000
DVB-S IF freq is 1038000
0x07fe 0x2848: pmt_pid 0x0108 BSkyB -- BBC 2 Wales (running)
0x07fe 0x2851: pmt_pid 0x0106 BSkyB -- ETV5 (running)
0x07fe 0x283d: pmt_pid 0x0100 BSkyB -- BBC 1 W Mids (running)
0x07fe 0x283f: pmt_pid 0x0102 BSkyB -- BBC 1 Yrks&Lin (running)
0x07fe 0x2841: pmt_pid 0x0104 BSkyB -- BBC 1 E Mids (running)
0x07fe 0x2842: pmt_pid 0x0105 BSkyB -- BBC 1 East (E) (running)
0x07fe 0x2843: pmt_pid 0x0102 BSkyB -- BBC PARL'MNT (running)
0x07fe 0x2847: pmt_pid 0x0107 BSkyB -- BBC 1 Wales (running)
Network Name 'ASTRA'
Network Name 'ASTRA'
>>> tune to: 10847:v:0:23000
DVB-S IF freq is 1097000
WARNING: >>> tuning failed!!!
>>> tune to: 10847:v:0:23000 (tuning failed)
DVB-S IF freq is 1097000
As you can see, DVB-S is fine, just the all important DVB-S2.
I am way over my head here, no error messages in the dmesg:
cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
cx88[0]: TV tuner type -1, Radio tuner type -1
cx88[0]: hauppauge eeprom: model=69100
input: cx88 IR (Hauppauge WinTV-HVR400 as /class/input/input1
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
cx88[0]/0: found at 0000:04:09.0, rev: 5, irq: 50, latency: 20, mmio: 0xfb000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
cx88[0]/2: cx2388x 8802 Driver Manager
cx88[0]/2: found at 0000:04:09.2, rev: 5, irq: 50, latency: 64, mmio: 0xf9000000
cx88/2: cx2388x dvb driver version 0.0.7 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 1 frontend(s)
DVB: registering new adapter (cx88[0])
Can anyone suggest anything to try and resolve this issue?
Jon