Xbox One DVB-T/T2/C tuner

noggin · 2014-10-21T15:38:04+00:00

Hi all This looks like it could be very good value if Open Source drivers appear for it : http://www.xbox.com/en-GB/xbox-one/accessories/digital-tv-tuner#fb...

Josu Lazkano

Walter av wrote:
> Stephen Neal wrote:
> > As a relative novice at this, but who has got it working on a Pi3, it looks like you don't have lsdiff installed - which is a dependency for compilation?
> >
> > Have you installed all the packages you need for building media_build - they are detailed here https://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
> >
> > It's probably patch or patchutils you have missing?
>

> You're right about the lsdiff package from patchutils however did you get it to compile for the default raspbian linux kernel 4.9.x? Could you please share how you did it?

Hello Stephen,

I am actually building the driver for the Raspbian kernel, it is getting so long to compile, I leave allthe night and it fail again. I installed more packages:

apt-get install git patchutils raspberrypi-kernel-headers libdigest-sha-perl libproc-processtable-perl

Now it is compiliung again so I will have a result in hours, I will comment here how is going.

Kind regards.

CvH

Walter av wrote:

> Please be more complete with your findings. Please post which version of tvheadend and the kernel comes with RPI libreelec image you are using?

I currently try to rule out that the LE system is somehow influencing the driver (everyone is reporting the same that no data is working - everything else looks okay). Tvh and Kernel is at latest stable version so there should be no surprises.

marco raap wrote:

> I didn't find any muxes

pls try http://cvh.libreelec.tv/Test/xbox/ the 1.1 version of the image (now pure media_build offered from Olli instead of patch)

Walter av

@Olli Salonen

Thanks for building a linux kernel conform driver, so far these are my findings for single DVB-T and multiple DVB-C use cases on ubuntu server 16.04 amd64bit with linux kernel version 4.10.28 from the HWE stack.

Just able to test DVB-T with service provider "Digitenne FTA Netherlands, Drenthe" and got it working although with a very low reception (5/10%). I had to sit outside with an external antenna(passive) and was able to watch 4 channels at the same time on the same 786MHZ mux. Other mux frequencies(506,546,570,738) did successful service scans here but I have no subscription to that. After a couple of minutes 3-5 some continuity errors come up. This might be just the case for this region I'm in right now as in bad reception in rural areas.

Remote testing multiple xbox as DVB-C tuners work like @Anthony Thomas already confirmed. Got that working on 3 tuners to scan muxes (even high frequencies) and work simultaneously on the same server using the service provider "Ziggo FTA Netherlands, Sassenheim". Although they seem to generate more continuity errors than other solutions.

I will do comparison tests with other adapters and older xbox drivers builds @Sky Anakin for both DVB-T and DVB-C next week, to compare continuity error performance.

Again thanks for pushing this!

noggin

For those asking how I installed the drivers on my Pi 3 - this is what I remember doing. I can't guarantee it's a complete how-to - but it's a good set of hints.

I first downloaded Jessie Lite Raspbian from here : https://www.raspberrypi.org/downloads/raspbian/

Flashed that to a Micro SD card, added an empty file called

ssh

(no extension) to the MicroSD card to enable SSH.

Booted up, let it do its thing then SSHed in (default login

pi

default password

raspberry@) and did : @sudo apt-get update

Downloaded Raspbian kernel headers :

sudo apt-get install raspberrypi-kernel-headers

(Details here : https://www.raspberrypi.org/documentation/linux/kernel/headers.md )

Installed dependencies for building media_build

sudo apt-get install libdigest-sha-perl make gcc git patch patchutils libproc-processtable-perl

following instructions here (Raspbian=Debian in this case) https://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers

Then followed the instructions in this thread

git clone git://linuxtv.org/media_build.git git clone --depth=1 https://github.com/trsqr/media_tree.git -b xboxone ./media cd media_build make dir DIR=../media make distclean make

There may have been some errors at this point regarding additional dependencies to add - I think I just sudo apt-get installed the packages in question that were flagged.

I then installed with

sudo make install

and rebooted with

sudo reboot now

I then realised I needed firmware.

cd /lib/firmware

sudo wget http://linuxtv.org/downloads/firmware/dvb-usb-dib0700-1.20.fw

(I found the link by googling)

sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/MN88472/02/088b891ac9273ff8c6818fca27b24d81/dvb-demod-mn88472-02.fw

(Again - slightly trickier - but found by googling)

sudo reboot now

to reboot

These two firmware files need to be present in /lib/firmware as - I think - they are loaded onto the USB tuner when it is initialised by the driver.

I may have missed a stage out - if I get a chance I'll repeat it from scratch and update this post.

EDITED to add firmware download

Please note - I don't claim this is a good way, the right way, the only way to do this - it just worked for me. I'm watching the Crystal Palace DVB-T/T2 muxes in London (with a rooftop aerial/antenna and a reasonable signal)

Walter av

@Stephen Neal

Thanks for posting your Rpi steps, I will try to repeat these steps however they do not really differ much from the steps I took earlier especially concerned possible kernel patching. But libreELEC also runs 4.9.34 kernel which '@C vH' was able to compile the module for.

@C vH

The v1.1 image (6023c32ff56c39d1f70a880895be5fb3 LibreELEC-RPi2.arm-8.1-xbox-dvb-driver-mb-1.1.img.gz) is not working yet for me on DVB-T, took the same tuner + antenne on the same spot (as with my netbook 1 minute before) and was not able to scan any muxes. I installed tvheadend(4.2.2-75 ~ LibreELEC Tvh-addon v8.2.111) from the addons (thought it was already installed on your image), however dmesg spits out these messages:

usb 1-1.3: DVB: adapter 0 frontend 0 frequency limits undefined - fix the driver

CvH

Walter av wrote:

> The v1.1 image (6023c32ff56c39d1f70a880895be5fb3 LibreELEC-RPi2.arm-8.1-xbox-dvb-driver-mb-1.1.img.gz) is not working yet for me on DVB-T, took the same tuner + antenne on the same spot (as with my netbook 1 minute before) and was not able to scan any muxes. I installed tvheadend(4.2.2-75 ~ LibreELEC Tvh-addon v8.2.111) from the addons (thought it was already installed on your image), however dmesg spits out these messages:

urgs I guess we triggered the problem we have with some usb devices like the TT-3650 that somehow do not work for some reason (we didn't found till date), sadly i have zero reception at home so I can't test it :(

marco raap

@C vH
So I downloaded the New Image.
The Driver seems to be better because I have 2 Tuners now. DVB-C & DVB-T
I searched on DVB-C but again. No Services found.
Tried an other Stick and here I found all the Services.

When I trie to use booth the XBOX Stick didn't work. The Hauppauge work fine.

If you need something tell me I´ll post all u need.
<<

noggin

Yep - I can't get the LibreElec buld from C vH to work with my XBox One tuner either - but my home compiled version of TV Headend only running on Jessie Lite with drivers compiled as above works fine. (Literally swapped the uSD cards out to check)

marco raap

@Stephen Neal,
on the Raspberry Pi3? Can you share it?

noggin

marco raap wrote:
> @Stephen Neal,

> on the Raspberry Pi3? Can you share it?

I posted instructions earlier in this thread.

(This is purely for a TV Headend backend - not running LibreElec or Kodi front end)

marco raap

@Stephen Neal

did all you said and after 4 hours. Didn't work. Nice try.

So my last hope depends on C vH and his Image.

Sad why is it not possible to just use the driver.....

pi@raspberrypi:~/media_build $ sudo make dir DIR=../media make -C linux/ dir DIR="../../media" make[1]: Entering directory '/home/pi/media_build/linux' rm -rf drivers firmware include sound .patches_applied .linked_dir .git_log.md5 git_log kernel_version.h ../../media does not contain kernel sources /bin/sh: 1: exit: Illegal number: -1 Makefile:128: recipe for target 'dir' failed make[1]: *** [dir] Error 2 make[1]: Leaving directory '/home/pi/media_build/linux' Makefile:32: recipe for target 'dir' failed make: *** [dir] Error 2 pi@raspberrypi:~/media_build $


pi@raspberrypi:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.35-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1014 SMP Fri Jun 30 14:47:43 BST 2017
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 8 MiB at 0x3a800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 80c6ee40, node_mem_map b9faa000
[    0.000000]   Normal zone: 2124 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] percpu: Embedded 14 pages/cpu @b9f64000 s25600 r8192 d23552 u57344
[    0.000000] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239540
[    0.000000] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=5fb0d7cb-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 936296K/966656K available (7168K kernel code, 484K rwdata, 2012K rodata, 1024K init, 778K bss, 22168K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
    lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x80800000   (8160 kB)
      .init : 0x80b00000 - 0x80c00000   (1024 kB)
      .data : 0x80c00000 - 0x80c79014   ( 485 kB)
       .bss : 0x80c7b000 - 0x80d3da64   ( 779 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000025] Switching to timer-based delay loop, resolution 52ns
[    0.000333] Console: colour dummy device 80x30
[    0.001226] console [tty1] enabled
[    0.001275] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.001345] pid_max: default: 32768 minimum: 301
[    0.001703] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001745] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002777] Disabling cpuset control group subsystem
[    0.002968] CPU: Testing write buffer coherency: ok
[    0.003038] ftrace: allocating 22390 entries in 66 pages
[    0.054351] CPU0: update cpu_capacity 1024
[    0.054421] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.054520] Setting up static identity map for 0x100000 - 0x100034
[    0.056755] CPU1: update cpu_capacity 1024
[    0.056763] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.057477] CPU2: update cpu_capacity 1024
[    0.057484] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.058153] CPU3: update cpu_capacity 1024
[    0.058160] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.058243] Brought up 4 CPUs
[    0.058414] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.058444] CPU: All CPU(s) started in HYP mode.
[    0.058470] CPU: Virtualization extensions available.
[    0.059293] devtmpfs: initialized
[    0.070355] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.070678] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.070740] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.071302] pinctrl core: initialized pinctrl subsystem
[    0.072222] NET: Registered protocol family 16
[    0.074507] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.083386] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.083434] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.083613] Serial: AMBA PL011 UART driver
[    0.085510] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.086057] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.154958] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb80f000, dmachans=0x1
[    0.156823] SCSI subsystem initialized
[    0.157004] usbcore: registered new interface driver usbfs
[    0.157106] usbcore: registered new interface driver hub
[    0.157221] usbcore: registered new device driver usb
[    0.163892] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-07-03 14:16
[    0.165321] clocksource: Switched to clocksource arch_sys_counter
[    0.212222] VFS: Disk quotas dquot_6.6.0
[    0.212333] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.212555] FS-Cache: Loaded
[    0.212826] CacheFiles: Loaded
[    0.225100] NET: Registered protocol family 2
[    0.226037] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.226175] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.226385] TCP: Hash tables configured (established 8192 bind 8192)
[    0.226498] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.226565] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.226800] NET: Registered protocol family 1
[    0.227233] RPC: Registered named UNIX socket transport module.
[    0.227266] RPC: Registered udp transport module.
[    0.227293] RPC: Registered tcp transport module.
[    0.227321] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.228290] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[    0.230598] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.246727] FS-Cache: Netfs 'nfs' registered for caching
[    0.247726] NFS: Registering the id_resolver key type
[    0.247794] Key type id_resolver registered
[    0.247822] Key type id_legacy registered
[    0.250267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.250413] io scheduler noop registered
[    0.250444] io scheduler deadline registered (default)
[    0.250770] io scheduler cfq registered
[    0.256438] BCM2708FB: allocated DMA memory fa910000
[    0.256494] BCM2708FB: allocated DMA channel 0 @ bb80f000
[    0.306744] Console: switching to colour frame buffer device 228x61
[    0.337355] bcm2835-rng 3f104000.rng: hwrng registered
[    0.337608] vc-cma: Videocore CMA driver
[    0.337725] vc-cma: vc_cma_base      = 0x00000000
[    0.337858] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    0.338008] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    0.338362] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    0.354150] brd: module loaded
[    0.363331] loop: module loaded
[    0.363466] Loading iSCSI transport class v2.0-870.
[    0.364190] usbcore: registered new interface driver smsc95xx
[    0.364374] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.592597] Core Release: 2.80a
[    0.592703] Setting default values for core params
[    0.592875] Finished setting default values for core params
[    0.793423] Using Buffer DMA mode
[    0.793530] Periodic Transfer Interrupt Enhancement - disabled
[    0.793697] Multiprocessor Interrupt Enhancement - disabled
[    0.793860] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.793993] Dedicated Tx FIFOs mode
[    0.794475] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xba904000 dma = 0xfa904000 len=9024
[    0.794772] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[    0.795396] dwc_otg: Microframe scheduler enabled
[    0.795446] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x8058ef90
[    0.802290] WARN::hcd_init_fiq:460: FIQ ASM at 0x8058f300 length 36
[    0.808995] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87a000
[    0.815747] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.822476] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.829353] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.836156] Init: Port Power? op_state=1
[    0.842772] Init: Power Port (0)
[    0.849594] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.856259] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.862965] usb usb1: Product: DWC OTG Controller
[    0.869611] usb usb1: Manufacturer: Linux 4.9.35-v7+ dwc_otg_hcd
[    0.876256] usb usb1: SerialNumber: 3f980000.usb
[    0.883778] hub 1-0:1.0: USB hub found
[    0.890495] hub 1-0:1.0: 1 port detected
[    0.897846] dwc_otg: FIQ enabled
[    0.897851] dwc_otg: NAK holdoff enabled
[    0.897855] dwc_otg: FIQ split-transaction FSM enabled
[    0.897869] Module dwc_common_port init
[    0.898150] usbcore: registered new interface driver usb-storage
[    0.905009] mousedev: PS/2 mouse device common for all mice
[    0.912739] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.919699] bcm2835-cpufreq: min=600000 max=1200000
[    0.926671] sdhci: Secure Digital Host Controller Interface driver
[    0.933344] sdhci: Copyright(c) Pierre Ossman
[    0.940226] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[    0.949245] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[    0.956091] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.965511] ledtrig-cpu: registered to indicate activity on CPUs
[    0.972443] hidraw: raw HID events driver (C) Jiri Kosina
[    0.979502] usbcore: registered new interface driver usbhid
[    0.986387] usbhid: USB HID core driver
[    0.994014] vchiq: vchiq_init_state: slot_zero = 0xba980000, is_master = 0
[    1.002907] Initializing XFRM netlink socket
[    1.010015] NET: Registered protocol family 17
[    1.017089] Key type dns_resolver registered
[    1.024324] Registering SWP/SWPB emulation handler
[    1.032078] registered taskstats version 1
[    1.039354] vc-sm: Videocore shared memory driver
[    1.046443] [vc_sm_connected_init]: start
[    1.053858] [vc_sm_connected_init]: end - returning 0
[    1.066857] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    1.075637] sdhost: log_buf @ ba907000 (fa907000)
[    1.115456] Indeed it is in host mode hprt0 = 00021501
[    1.205351] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    1.209996] random: fast init done
[    1.221677] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    1.228811] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    1.295482] of_cfs_init
[    1.302649] of_cfs_init: OK
[    1.305739] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.307768] mmc0: new high speed SDHC card at address b368
[    1.308488] mmcblk0: mmc0:b368 NCard 3.70 GiB
[    1.310965]  mmcblk0: p1 p2
[    1.314237] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.315794] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.317348] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.320133] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.325363] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.325528] Indeed it is in host mode hprt0 = 00001101
[    1.400457] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.407409] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.429733] devtmpfs: mounted
[    1.438397] Freeing unused kernel memory: 1024K (80b00000 - 80c00000)
[    1.471726] mmc1: new high speed SDIO card at address 0001
[    1.555683] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.562817] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.570792] hub 1-1:1.0: USB hub found
[    1.578135] hub 1-1:1.0: 5 ports detected
[    1.905375] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.009274] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    2.017206] systemd[1]: Detected architecture 'arm'.
[    2.045749] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.045758] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.054621] smsc95xx v1.0.5
[    2.159055] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:73:d2:fa
[    2.265575] usb 1-1.4: new high-speed USB device number 4 using dwc_otg
[    2.288295] NET: Registered protocol family 10
[    2.297628] systemd[1]: Inserted module 'ipv6'
[    2.307490] systemd[1]: Set hostname to <raspberrypi>.
[    2.315219] systemd[1]: Initializing machine ID from random generator.
[    2.323131] systemd[1]: Installed transient /etc/machine-id file.
[    2.415764] usb 1-1.4: New USB device found, idVendor=0409, idProduct=005a
[    2.423603] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.436379] hub 1-1.4:1.0: USB hub found
[    2.445645] hub 1-1.4:1.0: 4 ports detected
[    2.545389] usb 1-1.5: new high-speed USB device number 5 using dwc_otg
[    2.676163] usb 1-1.5: New USB device found, idVendor=2040, idProduct=0264
[    2.683809] usb 1-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.691352] usb 1-1.5: Product: soloHD
[    2.698942] usb 1-1.5: Manufacturer: HCW
[    2.706369] usb 1-1.5: SerialNumber: 0011549313
[    2.785415] usb 1-1.4.3: new high-speed USB device number 6 using dwc_otg
[    2.916024] usb 1-1.4.3: New USB device found, idVendor=045e, idProduct=02d5
[    2.923584] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.931118] usb 1-1.4.3: Product: Xbox USB Tuner
[    2.938572] usb 1-1.4.3: Manufacturer: Microsoft Corp.
[    2.946064] usb 1-1.4.3: SerialNumber: 000684150615
[    2.974688] systemd[1]: Cannot add dependency job for unit regenerate_ssh_host_keys.service, ignoring: Unit regenerate_ssh_host_keys.service failed to load: No such file or directory.
[    2.983055] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    2.994258] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.002875] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.245390] usb 1-1.4.4: new high-speed USB device number 7 using dwc_otg
[    3.394076] usb 1-1.4.4: New USB device found, idVendor=067b, idProduct=2773
[    3.394100] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.394109] usb 1-1.4.4: Product: ATAPI-6 Bridge Controller
[    3.394123] usb 1-1.4.4: Manufacturer: Prolific Technology Inc.
[    3.394141] usb 1-1.4.4: SerialNumber: 0123456789000000006
[    3.395524] usb-storage 1-1.4.4:1.0: USB Mass Storage device detected
[    3.396409] scsi host0: usb-storage 1-1.4.4:1.0
[    4.038786] systemd-udevd[148]: starting version 215
[    4.408242] scsi 0:0:0:0: Direct-Access     WDC WD10 EADS-11M2B2      80.0 PQ: 0 ANSI: 0
[    4.409918] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    4.410478] sd 0:0:0:0: [sda] Write Protect is off
[    4.410496] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[    4.410883] sd 0:0:0:0: [sda] No Caching mode page found
[    4.410896] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    4.411407] scsi 0:0:0:1: Direct-Access     WDC WD10 EARS-00Y5B1      80.0 PQ: 0 ANSI: 0
[    4.413447] sd 0:0:0:1: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    4.436774] sd 0:0:0:1: [sdb] Write Protect is off
[    4.436792] sd 0:0:0:1: [sdb] Mode Sense: 03 00 00 00
[    4.437825] sd 0:0:0:1: [sdb] No Caching mode page found
[    4.437840] sd 0:0:0:1: [sdb] Assuming drive cache: write through
[    4.507548]  sda: sda1 sda2
[    4.517354]  sdb: sdb1 sdb2
[    4.519484] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.520395] sd 0:0:0:1: [sdb] Attached SCSI disk
[    4.743058] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    4.745430] usb 1-1.4.1: new high-speed USB device number 8 using dwc_otg
[    4.877135] usb 1-1.4.1: New USB device found, idVendor=152d, idProduct=8561
[    4.877153] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    4.877161] usb 1-1.4.1: Product: JMS56x Series
[    4.877169] usb 1-1.4.1: Manufacturer: JMicron
[    4.877177] usb 1-1.4.1: SerialNumber: 00A123456877
[    4.878704] usb-storage 1-1.4.1:1.0: USB Mass Storage device detected
[    4.879330] scsi host1: usb-storage 1-1.4.1:1.0
[    4.898115] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.898439] sd 0:0:0:1: Attached scsi generic sg1 type 0
[    5.265087] usbcore: registered new interface driver brcmfmac
[    5.386174] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.483887] brcmfmac: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
[    5.667875] random: crng init done
[    5.926294] scsi 1:0:0:0: Direct-Access     SAMSUNG  HN-M101MBB       0107 PQ: 0 ANSI: 6
[    5.927857] sd 1:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    5.928419] sd 1:0:0:0: [sdc] Write Protect is off
[    5.928435] sd 1:0:0:0: [sdc] Mode Sense: 47 00 10 08
[    5.928940] sd 1:0:0:0: [sdc] No Caching mode page found
[    5.928952] sd 1:0:0:0: [sdc] Assuming drive cache: write through
[    5.945524] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    5.952786]  sdc: sdc1
[    5.953267] scsi 1:0:0:1: Direct-Access     ST350031 2CS              0107 PQ: 0 ANSI: 6
[    5.955134] sd 1:0:0:1: Attached scsi generic sg3 type 0
[    5.956735] sd 1:0:0:1: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.957526] sd 1:0:0:1: [sdd] Write Protect is off
[    5.957538] sd 1:0:0:1: [sdd] Mode Sense: 47 00 10 08
[    5.958393] sd 1:0:0:1: [sdd] No Caching mode page found
[    5.958405] sd 1:0:0:1: [sdd] Assuming drive cache: write through
[    5.959443] sd 1:0:0:0: [sdc] Attached SCSI disk
[    5.984429]  sdd: sdd1
[    5.995532] sd 1:0:0:1: [sdd] Attached SCSI disk
[    6.054361] media: loading out-of-tree module taints kernel.
[    6.056765] media: Linux media interface: v0.10
[    6.093824] Linux video capture interface: v2.00
[    6.093836] WARNING: You are using an experimental version of the media stack.
	As the driver is backported to an older kernel, it doesn't offer
	enough quality for its usage in production.
	Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
	da48c948c263c9d87dfc64566b3373a858cc8aa2 media: fix warning on v4l2_subdev_call() result interpreted as bool
	14330d7f08bab92029f0c95c70fe200e8d76b31e media: imx: csi: enable double write reduction
	9e6b1dae37810bec45c80d478636b254db377eaa media: coda: explicitly request exclusive reset control
[    6.143631] em28xx 1-1.5:1.0: New device HCW soloHD @ 480 Mbps (2040:0264, interface 0, class 0)
[    6.143650] em28xx 1-1.5:1.0: DVB interface 0 found: isoc
[    6.144246] em28xx 1-1.5:1.0: chip ID is em28178
[    6.202808] systemd-journald[145]: Received request to flush runtime journal from PID 1
[    8.232310] em28xx 1-1.5:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x75ebcd04
[    8.232318] em28xx 1-1.5:1.0: EEPROM info:
[    8.232327] em28xx 1-1.5:1.0: 	microcode start address = 0x0004, boot configuration = 0x01
[    8.238882] em28xx 1-1.5:1.0: 	AC97 audio (5 sample rates)
[    8.238892] em28xx 1-1.5:1.0: 	500mA max power
[    8.238904] em28xx 1-1.5:1.0: 	Table at offset 0x27, strings=0x0e6a, 0x1888, 0x087e
[    8.239147] em28xx 1-1.5:1.0: Identified as PCTV tripleStick (292e) (card=94)
[    8.239160] em28xx 1-1.5:1.0: dvb set to isoc mode.
[    8.239599] usbcore: registered new interface driver em28xx
[    8.265884] WARNING: You are using an experimental version of the media stack.
	As the driver is backported to an older kernel, it doesn't offer
	enough quality for its usage in production.
	Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
	da48c948c263c9d87dfc64566b3373a858cc8aa2 media: fix warning on v4l2_subdev_call() result interpreted as bool
	14330d7f08bab92029f0c95c70fe200e8d76b31e media: imx: csi: enable double write reduction
	9e6b1dae37810bec45c80d478636b254db377eaa media: coda: explicitly request exclusive reset control
[    8.273728] em28xx 1-1.5:1.0: Binding DVB extension
[    8.297876] i2c i2c-4: Added multiplexed i2c bus 5
[    8.297894] si2168 4-0064: Silicon Labs Si2168-B40 successfully identified
[    8.297902] si2168 4-0064: firmware version: B 4.0.2
[    8.312454] si2157 5-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached
[    8.312504] dvbdev: DVB: registering new adapter (1-1.5:1.0)
[    8.312521] em28xx 1-1.5:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
[    8.312540] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
[    8.315039] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[    8.319414] em28xx 1-1.5:1.0: DVB extension successfully initialized
[    8.319438] em28xx: Registered (Em28xx dvb Extension) extension
[    8.336693] WARNING: You are using an experimental version of the media stack.
	As the driver is backported to an older kernel, it doesn't offer
	enough quality for its usage in production.
	Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
	da48c948c263c9d87dfc64566b3373a858cc8aa2 media: fix warning on v4l2_subdev_call() result interpreted as bool
	14330d7f08bab92029f0c95c70fe200e8d76b31e media: imx: csi: enable double write reduction
	9e6b1dae37810bec45c80d478636b254db377eaa media: coda: explicitly request exclusive reset control
[    8.341120] em28xx 1-1.5:1.0: Registering input extension
[    8.385348] Registered IR keymap rc-pinnacle-pctv-hd
[    8.385752] rc rc0: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0
[    8.385931] input: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0/input0
[    8.385958] em28xx 1-1.5:1.0: Input extension successfully initialized
[    8.385962] em28xx: Registered (Em28xx Input Extension) extension
[    8.543084] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    8.543101] brcmfmac: power management disabled
[    9.379728] uart-pl011 3f201000.serial: no DMA platform data
[   10.736478] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   11.173720] Adding 102396k swap on /var/swap.  Priority:-1 extents:4 across:241660k SSFS
[   12.356637] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   14.378952] Bluetooth: Core ver 2.22
[   14.379002] NET: Registered protocol family 31
[   14.379006] Bluetooth: HCI device and connection manager initialized
[   14.379020] Bluetooth: HCI socket layer initialized
[   14.379028] Bluetooth: L2CAP socket layer initialized
[   14.379065] Bluetooth: SCO socket layer initialized
[   14.389824] Bluetooth: HCI UART driver ver 2.3
[   14.389831] Bluetooth: HCI UART protocol H4 registered
[   14.389834] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   14.389937] Bluetooth: HCI UART protocol Broadcom registered
[   14.653396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.653406] Bluetooth: BNEP filters: protocol multicast
[   14.653424] Bluetooth: BNEP socket layer initialized
[   15.292846] si2168 4-0064: Direct firmware load for dvb-demod-si2168-b40-01.fw failed with error -2
[   15.298490] si2168 4-0064: please install firmware file 'dvb-demod-si2168-b40-01.fw'
[   15.298496] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-02.fw'
[   15.298502] si2168 4-0064: firmware download failed -22
[   15.302956] si2157 5-0060: found a 'Silicon Labs Si2157-A30'

maybe that help...

Andras Farago

Olli Salonen wrote:
> Thanks CvH, I was planning to, but now I don't have to. Will you compile it for x86 as well please? :)
>

> Andras, ok, there's not much we can do then, except start to guess which registers to change but that's a neverending task. I'll do that power level thing a bit later, the next couple of weeks I'm very little in front of my PC...

I have another plan. One of my colleague has an Xbox one, I have a tuner and a i2c sniffer, so next week I am going to sniff the i2c communication between the demodulator ic and the tuner with an Xbox. I tried it, the method is working with the linux driver, I can see what control datas the tuner get, so the next step is the same but with an Xbox.

noggin

marco raap wrote:
> @Stephen Neal
>
> did all you said and after 4 hours. Didn't work. Nice try.
>
> So my last hope depends on C vH and his Image.
> Sad why is it not possible to just use the driver.....
>
> [...]
>
> [...]
>

> maybe that help...

Did you definitely install the kernel headers on a fresh Jessie Lite install?

CvH

Stephen Neal wrote:

> Did you definitely install the kernel headers on a fresh Jessie Lite install?

maybe make install is missing, his log shows some different media_build version

> #install base system
> sudo apt update && sudo apt upgrade
> sudo apt install raspberrypi-kernel-headers make gcc git patch patchutils libproc-processtable-perl
>
> #clone git
> cd
> git clone git://linuxtv.org/media_build.git
> git clone --depth=1 https://github.com/trsqr/media_tree.git -b xboxone ./media
>
> #build media_build
> cd media_build
> make dir DIR=../media
> make distclean
> make
>
> #install it
> sudo make install
>
> #download the needed fws
> cd /lib/firmware
> sudo wget http://linuxtv.org/downloads/firmware/dvb-usb-dib0700-1.20.fw > sudo wget http://palosaari.fi/linux/v4l-dvb/firmware/MN88472/02/latest/dvb-demod-mn88472-02.fw >

> reboot

that worked for me at a fresh new raspbian (iirc)

marco raap

ok. i´ll give it a try later
<<

Anonymous

Btw guys, even if it's obvious, there are 2 types of Xbox One USB Tuners.

- Haupauge -DVB-S- ATSC for the US region

- NXP DVB-T/DVB-T2/DVB-C

Just making sure you all know :P

noggin

Tux User wrote:
> Btw guys, even if it's obvious, there are 2 types of Xbox One USB Tuners.
>
> - Haupauge DVB-S for the US region
> - NXP DVB-T/DVB-T2/DVB-C
>

> Just making sure you all know :P

Yep - this thread is purely for the DVB-T/T2/C one (as per thread title)

But surely the US XBox One tuner is ATSC 8VSB (i.e. the US OTA Digital Terrestrial standard) not DVB-S (the satellite standard)?

Anonymous

Thanks Stephen, you are right, corrected

CvH

marco raap wrote:

> ok. i´ll give it a try later

RPi2/3 image http://cvh.libreelec.tv/Test/xbox/ > LibreELEC-RPi2.arm-8.1-xbox-dvb-driver-mb-1.2.img.gz
looks now working for me :)
<<

marco raap

C vH wrote:
> marco raap wrote:
> > ok. i´ll give it a try later
>
> RPi2/3 image http://cvh.libreelec.tv/Test/xbox/ > > LibreELEC-RPi2.arm-8.1-xbox-dvb-driver-mb-1.2.img.gz

> looks now working for me :)

ok. now I´ve started the compiling. takes 2 hours. Why do I habe to compile all the drivers? Who cares. I can tell you later if your Images Worked for me.

« Previous Page Next Page »