August DVB-T210

derp derp · 2014-02-11T22:48:40+00:00

Hi. Was wondering if this was compatible with tvheadend as there's not much information from users about this device. Does anyone have one? Is it working wel...

Ben Efrati

Crazy Cat wrote:
> I not test Antti commit, but make similar TS FIFO reset in cxusb driver

> https://github.com/crazycat69/linux_media/commit/b55acc695c5979c0f5b0de8389ba22d8d364c2ea

I have similar problem as here:
https://tvheadend.org/d/1695-august-dvb-t210?r=22337#message-22337 The tuner works good but after some time not usable until unplug and reconnect (sometimes only reboot works)
this is the message from dmesg:

dvb-usb: bulk message failed: -110 (1/0)

I'm using your media build and this is my fw files:
<6>[ 71.182557] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
<6>[ 73.062944] si2168 5-0064: firmware version: B 4.0.19
<6>[ 76.021815] si2157 6-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
<6>[ 77.639903] si2157 6-0060: firmware version: 2.1.9

Crazy Cat

this another issue. maybe related to usb 3.0 host

Laurie Davis

I too have received a T230C (c689) and like others cannot get it to work with DVB-C. Same problem - cannot tune in TVH, lots of invalid checksum errors. It does work ok though on DVB-T2

I'm running CVH's Libreelec build which has this driver in it now, but it means I don't have w_scan so can't provide any diags.

Would be really great to get this working on DVB-C.

Thanks for all your work.

Ludovic L

Same problem for me:
I have a T230C (c689) and it just does not work with DVB-C. With TVH I cannot find any channel: scan no data, failed. The adapter is named Silicon Labs Si2168 : DVB-C #0 in TVH.
Signal seems good:

dvb-fe-tool --femon
       (0x00) Signal= -15.00dBm
       (0x00) Signal= -15.00dBm
       (0x00) Signal= -15.00dBm
       (0x00) Signal= -15.00dBm

Firmware seems ok:

dmesg | grep si21
[155445.479549] si2157 9-0060: Silicon Labs Si2141/2151 successfully attached
[155445.800247] si2168 8-0064: firmware: direct-loading firmware dvb-demod-si2168-d60-01.fw
[155445.800261] si2168 8-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw'
[155446.211435] si2168 8-0064: firmware version: D 6.0.2
[155446.230185] si2157 9-0060: Si2141/2151 reset attempts 1
[155446.238810] si2157 9-0060: found a 'Silicon Labs Si2141-A10'
[155446.238883] si2157 9-0060: firmware: direct-loading firmware dvb-tuner-si2141-a10-01.fw
[155446.238894] si2157 9-0060: downloading firmware from file 'dvb-tuner-si2141-a10-01.fw'
[155446.732929] si2157 9-0060: firmware version: 1.1.10

w_scan does not find any channel:



w_scan - fc - cCH > channels.conf
w_scan version 20130331 (compiled for DVB API 5.9)
using settings for SWITZERLAND
DVB cable
DVB-C
scan type CABLE, channellist 7
output format vdr-2.0
output charset 'UTF-8', use - C <charset> to override
Info: using DVB adapter auto detection.
        /dev/dvb/adapter0/frontend0 - >  CABLE "Silicon Labs Si2168": very good :-))

Using CABLE frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.a
frontend 'Silicon Labs Si2168' supports
INVERSION_AUTO
QAM_AUTO
FEC_AUTO
FREQ (42.00MHz ... 870.00MHz)
SRATE (1.000MSym/s ... 7.200MSym/s)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
73000: sr6900 (time: 00:00) sr6875 (time: 00:02)
81000: sr6900 (time: 00:05) sr6875 (time: 00:08)
113000: sr6900 (time: 00:10) sr6875 (time: 00:13)
121000: sr6900 (time: 00:15) sr6875 (time: 00:18)
129000: sr6900 (time: 00:20) sr6875 (time: 00:23)
137000: sr6900 (time: 00:25) sr6875 (time: 00:28)
145000: sr6900 (time: 00:30) sr6875 (time: 00:33)
153000: sr6900 (time: 00:36) sr6875 (time: 00:38)
161000: sr6900 (time: 00:41) sr6875 (time: 00:43)
169000: sr6900 (time: 00:46) sr6875 (time: 00:48)
314000: sr6900 (time: 00:51) sr6875 (time: 00:53)
322000: sr6900 (time: 00:56) sr6875 (time: 00:58)
330000: sr6900 (time: 01:01) sr6875 (time: 01:03)
338000: sr6900 (time: 01:06) sr6875 (time: 01:09)
346000: sr6900 (time: 01:11) sr6875 (time: 01:14)
354000: sr6900 (time: 01:16) sr6875 (time: 01:19)
362000: sr6900 (time: 01:21) sr6875 (time: 01:24)
370000: sr6900 (time: 01:26) sr6875 (time: 01:29)
378000: sr6900 (time: 01:31) sr6875 (time: 01:34)
386000: sr6900 (time: 01:37) sr6875 (time: 01:39)
394000: sr6900 (time: 01:42) sr6875 (time: 01:44)
402000: sr6900 (time: 01:47) sr6875 (time: 01:49)
410000: sr6900 (time: 01:52) sr6875 (time: 01:54)
418000: sr6900 (time: 01:57) sr6875 (time: 01:59)
426000: sr6900 (time: 02:02) sr6875 (time: 02:05)
434000: sr6900 (time: 02:07) sr6875 (time: 02:10)
442000: sr6900 (time: 02:12) sr6875 (time: 02:15)
450000: sr6900 (time: 02:17) sr6875 (time: 02:20)
458000: sr6900 (time: 02:22) sr6875 (time: 02:25)
466000: sr6900 (time: 02:27) sr6875 (time: 02:30)
474000: sr6900 (time: 02:32) sr6875 (time: 02:35)
482000: sr6900 (time: 02:38) sr6875 (time: 02:40)
490000: sr6900 (time: 02:43) sr6875 (time: 02:45)
498000: sr6900 (time: 02:48) sr6875 (time: 02:50)
506000: sr6900 (time: 02:53) sr6875 (time: 02:55)
514000: sr6900 (time: 02:58) sr6875 (time: 03:00)
522000: sr6900 (time: 03:03) sr6875 (time: 03:06)
530000: sr6900 (time: 03:08) sr6875 (time: 03:11)
538000: sr6900 (time: 03:13) sr6875 (time: 03:16)
546000: sr6900 (time: 03:18) sr6875 (time: 03:21)
554000: sr6900 (time: 03:23) sr6875 (time: 03:26)
562000: sr6900 (time: 03:28) sr6875 (time: 03:31)
570000: sr6900 (time: 03:33) sr6875 (time: 03:36)
578000: sr6900 (time: 03:39) sr6875 (time: 03:41)
586000: sr6900 (time: 03:44) sr6875 (time: 03:46)
594000: sr6900 (time: 03:49) sr6875 (time: 03:51)
602000: sr6900 (time: 03:54) sr6875 (time: 03:56)
610000: sr6900 (time: 03:59) sr6875 (time: 04:01)
618000: sr6900 (time: 04:04) sr6875 (time: 04:07)
626000: sr6900 (time: 04:09) sr6875 (time: 04:12)
634000: sr6900 (time: 04:14) sr6875 (time: 04:17)
642000: sr6900 (time: 04:19) sr6875 (time: 04:22)
650000: sr6900 (time: 04:24) sr6875 (time: 04:27)
658000: sr6900 (time: 04:29) sr6875 (time: 04:32)
666000: sr6900 (time: 04:34) sr6875 (time: 04:37)
674000: sr6900 (time: 04:40) sr6875 (time: 04:42)
682000: sr6900 (time: 04:45) sr6875 (time: 04:47)
690000: sr6900 (time: 04:50) sr6875 (time: 04:52)
698000: sr6900 (time: 04:55) sr6875 (time: 04:57)
706000: sr6900 (time: 05:00) sr6875 (time: 05:02)
714000: sr6900 (time: 05:05) sr6875 (time: 05:08)
722000: sr6900 (time: 05:10) sr6875 (time: 05:13)
730000: sr6900 (time: 05:15) sr6875 (time: 05:18)
738000: sr6900 (time: 05:20) sr6875 (time: 05:23)
746000: sr6900 (time: 05:25) sr6875 (time: 05:28)
754000: sr6900 (time: 05:30) sr6875 (time: 05:33)
762000: sr6900 (time: 05:35) sr6875 (time: 05:38)
770000: sr6900 (time: 05:41) sr6875 (time: 05:43)
778000: sr6900 (time: 05:46) sr6875 (time: 05:48)
786000: sr6900 (time: 05:51) sr6875 (time: 05:53)
794000: sr6900 (time: 05:56) sr6875 (time: 05:58)
802000: sr6900 (time: 06:01) sr6875 (time: 06:03)
810000: sr6900 (time: 06:06) sr6875 (time: 06:09)
818000: sr6900 (time: 06:11) sr6875 (time: 06:14)
826000: sr6900 (time: 06:16) sr6875 (time: 06:19)
834000: sr6900 (time: 06:21) sr6875 (time: 06:24)
842000: sr6900 (time: 06:26) sr6875 (time: 06:29)
850000: sr6900 (time: 06:31) sr6875 (time: 06:34)
858000: sr6900 (time: 06:37) sr6875 (time: 06:39)
73000: sr6900 (time: 06:42) sr6875 (time: 06:44)
81000: sr6900 (time: 06:47) sr6875 (time: 06:49)
113000: sr6900 (time: 06:52) sr6875 (time: 06:54)
121000: sr6900 (time: 06:57) sr6875 (time: 06:59)
129000: sr6900 (time: 07:02) sr6875 (time: 07:04)
137000: sr6900 (time: 07:07) sr6875 (time: 07:10)
145000: sr6900 (time: 07:12) sr6875 (time: 07:15)
153000: sr6900 (time: 07:17) sr6875 (time: 07:20)
161000: sr6900 (time: 07:22) sr6875 (time: 07:25)
169000: sr6900 (time: 07:27) sr6875 (time: 07:30)
314000: sr6900 (time: 07:32) sr6875 (time: 07:35)
322000: sr6900 (time: 07:38) sr6875 (time: 07:40)
330000: sr6900 (time: 07:43) sr6875 (time: 07:45)
338000: sr6900 (time: 07:48) sr6875 (time: 07:50)
346000: sr6900 (time: 07:53) sr6875 (time: 07:55)
354000: sr6900 (time: 07:58) sr6875 (time: 08:00)
362000: sr6900 (time: 08:03) sr6875 (time: 08:05)
370000: sr6900 (time: 08:08) sr6875 (time: 08:11)
378000: sr6900 (time: 08:13) sr6875 (time: 08:16)
386000: sr6900 (time: 08:18) sr6875 (time: 08:21)
394000: sr6900 (time: 08:23) sr6875 (time: 08:26)
402000: sr6900 (time: 08:28) sr6875 (time: 08:31)
410000: sr6900 (time: 08:33) sr6875 (time: 08:36)
418000: sr6900 (time: 08:39) sr6875 (time: 08:41)
426000: sr6900 (time: 08:44) sr6875 (time: 08:46)
434000: sr6900 (time: 08:49) sr6875 (time: 08:51)
442000: sr6900 (time: 08:54) sr6875 (time: 08:56)
450000: sr6900 (time: 08:59) sr6875 (time: 09:01)
458000: sr6900 (time: 09:04) sr6875 (time: 09:06)
466000: sr6900 (time: 09:09) sr6875 (time: 09:12)
474000: sr6900 (time: 09:14) sr6875 (time: 09:17)
482000: sr6900 (time: 09:19) sr6875 (time: 09:22)
490000: sr6900 (time: 09:24) sr6875 (time: 09:27)
498000: sr6900 (time: 09:29) sr6875 (time: 09:32)
506000: sr6900 (time: 09:34) sr6875 (time: 09:37)
514000: sr6900 (time: 09:40) sr6875 (time: 09:42)
522000: sr6900 (time: 09:45) sr6875 (time: 09:47)
530000: sr6900 (time: 09:50) sr6875 (time: 09:52)
538000: sr6900 (time: 09:55) sr6875 (time: 09:57)
546000: sr6900 (time: 10:00) sr6875 (time: 10:02)
554000: sr6900 (time: 10:05) sr6875 (time: 10:07)
562000: sr6900 (time: 10:10) sr6875 (time: 10:13)
570000: sr6900 (time: 10:15) sr6875 (time: 10:18)
578000: sr6900 (time: 10:20) sr6875 (time: 10:23)
586000: sr6900 (time: 10:25) sr6875 (time: 10:28)
594000: sr6900 (time: 10:30) sr6875 (time: 10:33)
602000: sr6900 (time: 10:35) sr6875 (time: 10:38)
610000: sr6900 (time: 10:41) sr6875 (time: 10:43)
618000: sr6900 (time: 10:46) sr6875 (time: 10:48)
626000: sr6900 (time: 10:51) sr6875 (time: 10:53)
634000: sr6900 (time: 10:56) sr6875 (time: 10:58)
642000: sr6900 (time: 11:01) sr6875 (time: 11:03)
650000: sr6900 (time: 11:06) sr6875 (time: 11:09)
658000: sr6900 (time: 11:11) sr6875 (time: 11:14)
666000: sr6900 (time: 11:16) sr6875 (time: 11:19)
674000: sr6900 (time: 11:21) sr6875 (time: 11:24)
682000: sr6900 (time: 11:26) sr6875 (time: 11:29)
690000: sr6900 (time: 11:31) sr6875 (time: 11:34)
698000: sr6900 (time: 11:36) sr6875 (time: 11:39)
706000: sr6900 (time: 11:42) sr6875 (time: 11:44)
714000: sr6900 (time: 11:47) sr6875 (time: 11:49)
722000: sr6900 (time: 11:52) sr6875 (time: 11:54)
730000: sr6900 (time: 11:57) sr6875 (time: 11:59)
738000: sr6900 (time: 12:02) sr6875 (time: 12:04)
746000: sr6900 (time: 12:07) sr6875 (time: 12:10)
754000: sr6900 (time: 12:12) sr6875 (time: 12:15)
762000: sr6900 (time: 12:17) sr6875 (time: 12:20)
770000: sr6900 (time: 12:22) sr6875 (time: 12:25)
778000: sr6900 (time: 12:27) sr6875 (time: 12:30)
786000: sr6900 (time: 12:32) sr6875 (time: 12:35)
794000: sr6900 (time: 12:37) sr6875 (time: 12:40)
802000: sr6900 (time: 12:43) sr6875 (time: 12:45)
810000: sr6900 (time: 12:48) sr6875 (time: 12:50)
818000: sr6900 (time: 12:53) sr6875 (time: 12:55)
826000: sr6900 (time: 12:58) sr6875 (time: 13:00)
834000: sr6900 (time: 13:03) sr6875 (time: 13:05)
842000: sr6900 (time: 13:08) sr6875 (time: 13:11)
850000: sr6900 (time: 13:13) sr6875 (time: 13:16)
858000: sr6900 (time: 13:18) sr6875 (time: 13:21)

ERROR: Sorry - i couldn't get any working frequency/transponder
 Nothing to scan!!

I am running Debian 8.6 with CrazyCat's media_build from bitbucket.

Thanks for your help.

Crazy Cat

Device designed for DVB-T/T2 reception ane have some LNA before tuner IC. As i see your cable signal very strong ane maybe need connect via some attenuator (-20dB-15dB).

P.S.you can check all details of your signal in Windows with my CrazyScan2 software. Make RF-scan and search all available carriers with AirScan feature.
https://sourceforge.net/projects/crazyscan/ Read wiki for info about install.

Ludovic L

Transponders found: 0 with CrazyScan2. RF level between -12 and -18 dBm.
I will try to find an attenuator. Thanks a lot !

nuno mendes

I have a T230 C and works very well dvb-c with this fw using libreelec

Ludovic L

I added an attenuator before the stick. Now I have :
Transponders found: 58, RF level between -30 and -40 dBm with CrazyScan2.
With tvheadend I can find 12 services but I have a lot of transport and continuity errors and I can't watch any channel. SNR is 26.8dB and Signal Strength is -36.0 dBm.

Laurie Davis

I tried an attenuator as well but it made no difference and remains unusable for DVB-C in TVH.

nuno mendes

what system you are using
look this screen with dvb-c

Crazy Cat

Ludovic L wrote:
> I added an attenuator before the stick. Now I have :
> Transponders found: 58, RF level between -30 and -40 dBm with CrazyScan2.

> With tvheadend I can find 12 services but I have a lot of transport and continuity errors and I can't watch any channel. SNR is 26.8dB and Signal Strength is -36.0 dBm.

Look like need some little attenuation :-) SNR is bad for 256qam

Ludovic L

I am using Debian 8.6. Firmware is exactly the same as yours.
When I run w_scan, I get a lot of warnings:


...
WARNING: received garbage data: crc = 0x042e533f; expected crc = 0x6e0a34b6
WARNING: received garbage data: crc = 0x87466c4d; expected crc = 0xdd0fe863
WARNING: received garbage data: crc = 0x701aa6e8; expected crc = 0x48d7aefd
Info: no data from NIT(actual)
346000: sr6900 (time: 04:22) (time: 04:23) signal ok:
        QAM_AUTO f = 346000 kHz S6900C999
WARNING: received garbage data: crc = 0xdf56bc1a; expected crc = 0x95acfc80
increasing filter timeout.
WARNING: received garbage data: crc = 0xef4f85a6; expected crc = 0x6c483ee2
WARNING: received garbage data: crc = 0x42b04a20; expected crc = 0xedd6dc14
WARNING: received garbage data: crc = 0xea4b652a; expected crc = 0xffe439b1
WARNING: received garbage data: crc = 0xed6bd578; expected crc = 0xf6a06b4c
WARNING: received garbage data: crc = 0xc0803641; expected crc = 0x9260fd30
WARNING: received garbage data: crc = 0x29649ccb; expected crc = 0xddfdb805
WARNING: received garbage data: crc = 0x66125aae; expected crc = 0x3cc8ea54
WARNING: received garbage data: crc = 0xffdac358; expected crc = 0x02056802
WARNING: received garbage data: crc = 0xec14f354; expected crc = 0x315c58d5
WARNING: received garbage data: crc = 0xe9673b00; expected crc = 0x06c6ff35
WARNING: received garbage data: crc = 0x2328d9d6; expected crc = 0x3d543eba
increasing filter timeout.
WARNING: received garbage data: crc = 0x231b6073; expected crc = 0x86c6b2ff
WARNING: received garbage data: crc = 0xcf9211c9; expected crc = 0x21f654ac

...

What can I do now?

Ludovic L

With a 20 dB attenuator signal is about -36 dBm, SNR is 26.8 dB
With a 10 dB attenuator signal is about -26 dBm, SNR is 27.3 dB

With a 5 dB attenuator signal is about -24 dBm, SNR is 34 dB

What SNR should I have with QAM256 ?

Crazy Cat

>30 dB

Ludovic L

I made a Pi Attenuator with 2 75 Ohm resistors and a 4.7K Ohm resistor. The attenuation value is about 41 dB.
When I use this attenuator I have:
Signal: -29 dB (LNA ?), SNR 38.3 dB. I was able to map 175 channels (out of 420). I have some checksum and continuity errors and video artefacts.

Ludovic L

I purchased a 50 dB attenuator. Signal is now -41 dBm, SNR is 45 dB. I still have many checksum errors and I can map 300 channels out of 420. SNR seems pretty good, i believe I should not have these checksum errors.

Dreamcat 4

Hello. Long time ago bought these August DVB-T210 v1. It worked perfectly after upgrading the linux kernel to past 3.18. So I put them away in a drawer. Now after a long time i dig them out of the drawer and run w_scan from an ubuntu 16.04 live CD...

Problem is there are no HD channel coming up anymore, and also many CRC errors in w_scan output. Its as if the driver has regressed back to behaving how it used to in prior early pre-3.17 kernel versions.

Any ideas what might be going on here? Do I need to perform some extra manual actions before running w_scan, like loading up some firmware files or anything like that? Or install some other apt packages in addition to just 'w-scan'? Any help appreciated, heres a pastie of the terminal (for 'uname -a', 'dmesg', and the 'w_scan ...' output)

https://gist.github.com/dreamcat4/044aeb0e0627b7a52f43225a4e6690a7

Do I need to go get some older ubuntu ISO, eg 15.04 and re-test to compare it against the older kernel? Or is there some simpler solution to stay with 16.04 / 4.4 kernel?

Dreamcat 4

> Hello. Long time ago bought these August DVB-T210 v1

OK tried 15.04 liveCD, different USB port, different PC, everything I can think of but its no different. Over in windows 10 the HD channels work fine. Looking back at this thread it says CrazyCat patch is in kernel since 3.17. So not sure why this issue continues. Tuning contains CRC errors (assumed for the HD Channels), and then no HD Channels show up at the end of w_scan tuning.

Looks like there is no .fw file to load up. My dmesg again:

[1646818.828136] usb 2-3: new high-speed USB device number 3 using ehci-pci
[1646818.965046] usb 2-3: New USB device found, idVendor=1f4d, idProduct=d220
[1646818.965055] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1646818.965061] usb 2-3: Product: USB Device
[1646818.965066] usb 2-3: Manufacturer: Geniatech
[1646818.965070] usb 2-3: SerialNumber: 0001

[1646824.337071] dw2102: su3000_identify_state

[1646824.337078] dvb-usb: found a 'Geniatech T220 DVB-T/T2 USB2.0' in warm state.

[1646824.337088] dw2102: su3000_power_ctrl: 1, initialized 0

[1646824.337547] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[1646824.339351] DVB: registering new adapter (Geniatech T220 DVB-T/T2 USB2.0)
[1646824.345835] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff
[1646826.490323] tda18271 7-0060: creating new instance
[1646826.495203] TDA18271HD/C2 detected @ 7-0060

[1646826.740928] dw2102: Attached TDA18271HD/CXD2820R!

[1646826.740942] usb 2-3: DVB: registering adapter 0 frontend 0 (Sony CXD2820R)...
[1646826.824143] Registered IR keymap rc-su3000
[1646826.824538] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0/input14
[1646826.824681] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/rc/rc0
[1646826.824685] dvb-usb: schedule remote query interval to 150 msecs.

[1646826.824689] dw2102: su3000_power_ctrl: 0, initialized 1

[1646826.824692] dvb-usb: Geniatech T220 DVB-T/T2 USB2.0 successfully initialized and connected.
[1646826.824766] usbcore: registered new interface driver dw2102

Dreamcat 4

After installing media tree build, its still saying i2c bus error. Not sure how to enable more logging for debugging. But without doing anything else new dmesg now it shows a little more about the call stack. When this i2c bus error is occuring. It happens whenever the device is plugged into. Motherboard is an intel C232 chipset (skylake), with new intel usb chipset driver.

[ 2663.706212] dw2102: su3000_power_ctrl: 1, initialized 1
[ 2663.706247] BUG: unable to handle kernel NULL pointer dereference at 0000000000000012
[ 2663.706327] IP: [<ffffffff81682fb5>] i2c_transfer+0x15/0xb0
[ 2663.706383] PGD 8805c067 PUD 88045067 PMD 0
[ 2663.706428] Oops: 0000 [#1] SMP
[ 2663.706460] Modules linked in: nls_utf8 isofs bnep nls_iso8859_1 rc_su3000(OE) tda18271(OE) cxd2820r(E) dvb_usb_dw2102(OE) dvb_usb(OE) dvb_core(OE) rc_core(OE) media(OE) intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass ipmi_ssif serio_raw shpchp input_leds joydev mei_me mei 8250_fintek ipmi_si ipmi_msghandler hci_uart btbcm btqca btintel bluetooth intel_lpss_acpi intel_lpss acpi_power_meter mac_hid acpi_als kfifo_buf industrialio parport_pc ppdev lp parport autofs4 jitterentropy_rng drbg ansi_cprng algif_skcipher af_alg hid_generic usbhid dm_crypt uas usb_storage crct10dif_pclmul crc32_pclmul aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd psmouse ast ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm igb dca ptp pps_core i2c_algo_bit
[ 2663.707202] ahci libahci video i2c_hid hid pinctrl_sunrisepoint pinctrl_intel fjes
[ 2663.707276] CPU: 0 PID: 4297 Comm: kdvb-ad-0-fe-0 Tainted: G OE 4.4.0-45-generic #66-Ubuntu
[ 2663.707349] Hardware name: ASUSTeK COMPUTER INC. P10S-M Series/P10S-M Series, BIOS 0301 03/15/2016
[ 2663.707418] task: ffff880261d4a640 ti: ffff880262c68000 task.ti: ffff880262c68000
[ 2663.707475] RIP: 0010:[<ffffffff81682fb5>] [<ffffffff81682fb5>] i2c_transfer+0x15/0xb0
[ 2663.707544] RSP: 0018:ffff880262c6bcd0 EFLAGS: 00010282
[ 2663.707585] RAX: ffff880262c6bd0f RBX: 0000000000000002 RCX: 0000000000000001
[ 2663.707640] RDX: 0000000000000002 RSI: ffff880262c6bd10 RDI: 0000000000000002
[ 2663.707694] RBP: ffff880262c6bcf0 R08: 000000000000000a R09: 00000000000000db
[ 2663.707749] R10: ffff880260fdc400 R11: 00000000000003c7 R12: 0000000000000000
[ 2663.707803] R13: ffff880262c6bdbe R14: ffff88025ecba800 R15: 0000000000000001
[ 2663.707859] FS: 0000000000000000(0000) GS:ffff88026fc00000(0000) knlGS:0000000000000000
[ 2663.707920] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2663.707965] CR2: 0000000000000012 CR3: 0000000035099000 CR4: 00000000002406f0
[ 2663.708019] Stack:
[ 2663.708038] 0000000000000246 ffff880262c6bd38 0000000000000000 ffff880262c6bdbe
[ 2663.708105] ffff880262c6bda8 ffffffffc04eabc3 0000000000000000 db00880262c6bd18
[ 2663.708172] ffff000100000000 ffff880262c6bd0f ffff000100010000 ffff880262c6bd38
[ 2663.708238] Call Trace:
[ 2663.708269] [<ffffffffc04eabc3>] cxd2820r_rd_regs+0x103/0x230 [cxd2820r]
[ 2663.708326] [<ffffffffc04eafb1>] cxd2820r_wr_reg_mask+0x41/0xa0 [cxd2820r]
[ 2663.708383] [<ffffffffc04eb049>] cxd2820r_i2c_gate_ctrl+0x39/0x70 [cxd2820r]
[ 2663.708446] [<ffffffffc04bb61d>] dvb_frontend_init+0x4d/0xb0 [dvb_core]
[ 2663.708506] [<ffffffffc04bd1e4>] dvb_frontend_thread+0x94/0x720 [dvb_core]
[ 2663.708565] [<ffffffff8182d116>] ?schedule+0x3b6/0xa30
[ 2663.708615] [<ffffffffc04bd150>] ? dtv_set_frontend+0x410/0x410 [dvb_core]
[ 2663.708671] [<ffffffff810a0928>] kthread+0xd8/0xf0
[ 2663.708712] [<ffffffff810a0850>] ? kthread_create_on_node+0x1e0/0x1e0
[ 2663.708765] [<ffffffff81831c4f>] ret_from_fork+0x3f/0x70
[ 2663.708809] [<ffffffff810a0850>] ? kthread_create_on_node+0x1e0/0x1e0
[ 2663.708860] Code: 89 c6 48 89 df e8 7c fb ff ff 89 c2 eb d8 45 31 f6 e9 fb fc ff ff 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 48 89 fb 48 83 ec 08 <48> 8b 47 10 48 83 38 00 74 5a 65 8b 05 8a a3 98 7e a9 ff ff ff
[ 2663.709162] RIP [<ffffffff81682fb5>] i2c_transfer+0x15/0xb0
[ 2663.709212] RSP <ffff880262c6bcd0>
[ 2663.709240] CR2: 0000000000000012
[ 2663.728468] ---[ end trace 6c4773362ade3175 ]---

id@p10s-m-series:~$

Full dmesg

http://paste.ubuntu.com/23431865/

Bebetu _

I have a Raspberry Pi2 with the with osmc, Kodi 17 Beta6 and TVH.

I went through installing CrazyCat's drivers (with some pain due mostly to osmc specifics) and the stick is recognized correctly as DVB-T/T2/C. The problem is that I cannot tune into any HD channels and for manually added ones I only get sound. Here are some details:

osmc@osmc:~$ uname -a Linux osmc 4.4.27-2-osmc #1 SMP PREEMPT Sun Oct 30 16:33:55 UTC 2016 armv7l GNU/Linux osmc@osmc:~$ lsusb Bus 001 Device 005: ID 0572:c689 Conexant Systems (Rockwell), Inc. .. osmc@osmc:~$ dmesg | grep si21 41e47503ed9e0069b30c04d5bf3e7eb86c00a06c si2157: ISDB-T support. d52879196556001ca7e8d05811d18c93e3c30576 si2183: Minor fix. 41e47503ed9e0069b30c04d5bf3e7eb86c00a06c si2157: ISDB-T support. d52879196556001ca7e8d05811d18c93e3c30576 si2183: Minor fix. [ 9.948323] si2168 3-0064: Silicon Labs Si2168-D60 successfully identified [ 9.948334] si2168 3-0064: firmware version: D 6.0.1 [ 9.967216] si2157 4-0060: Silicon Labs Si2141/2151 successfully attached [ 16.109902] si2168 3-0064: downloading firmware from file 'dvb-demod-si2168-d60-01.fw' [ 16.523918] si2168 3-0064: firmware version: D 6.0.2 [ 16.541653] si2157 4-0060: Si2141/2151 reset attempts 1 [ 16.549590] si2157 4-0060: found a 'Silicon Labs Si2141-A10' [ 16.551007] si2157 4-0060: downloading firmware from file 'dvb-tuner-si2141-a10-01.fw' [ 17.010501] si2157 4-0060: firmware version: 1.1.10

tvheadend works OK with SD channels but neither w_scan nor scan-s2 or via TVH's GUI are able to tune into HD channels in my area (Berlin). I have manually added HD channels from the list here http://www.vdr-wiki.de/wiki/index.php/Channels.conf_DVBT-De-Berlin-Brandenburg but only one works (Das Erste HD) and only sound is available.

I've also tried the steps here https://tvheadend.org/d/3877-howto-setup-german-dvb-t2-beta-channels with no success either.

Is this because of the Raspberry Pi2 hardware not decoding HEVC/H.265? Any guidance is highly appreciated!

« Previous Page Next Page »