Just bought the DVBSky S952 about 4 days ago.
After building the drivers and installing the firmware, I can see both drivers in the config tab.
My question is about setting up the second tuner, I have managed to get the first one working, but having trouble getting the second to work.
This is how I set up the first tuner.
1) Enabled the Tuner
2) Created a new network using Astra 28.2E
3) Set first tuner using above network.
4) Waited till all muxs have been scanned and services are shown.
This is where, using a single tuner, you can scan for channels, and I did with success.
Now for the second tuner, I did the same as above, using a new network.
TVheadend found the muxs for the second tuner, but no services. Do I use the same network for all tuners? or am I doing something completely wrong.
TL;DR How do I setup TVHeadend for a dual tuner card.