Yeah I don't have cable either. Yep there are 2 adapters but the popup for both are the same i.e. only those 4 inputs.
From what you are saying it does seem as though it is trying to force me to use a C config when all I want is T/T2, it didn't occur to me until you suggested it, although other than the popup not sure what indication there would be to confirm this. If this is indeed the case I have no idea how to force it only T/T2 or how to disable C
The Card is PCI-E and know it works under M$, Openelec was the only distro i noticed that already had the drivers, I know xbmcbuntu doesn't.
Checked dmesg only relevant messages I could find are:
[ 5.265712] Digital Devices PCIE bridge driver 0.9.9, Copyright (C) 2010-13 Digital Devices GmbH
[ 5.269175] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19
[ 5.269309] DDBridge driver detected: Digital Devices Octopus V3 DVB adapter
[ 5.269354] HW 00010000 REGMAP 00010004
[ 5.403530] Port 0 (TAB 1): DUAL DVB-C/T/T2
[ 5.408068] Port 1 (TAB 2): NO MODULE
[ 5.409102] Port 2 (TAB 3): NO MODULE
[ 5.410091] Port 3 (TAB 4): NO MODULE
[ 5.412726] DVB: registering new adapter (DDBridge)
[ 5.412741] DVB: registering new adapter (DDBridge)
...
[ 1238.995851] irq 22: nobody cared (try booting with the "irqpoll" option)
[ 1238.995866] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P C O 3.13.0 #1
[ 1238.995871] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 12/10/2009
[ 1238.995877] 0000000000000000 ffffffff816e939e ffff8800cb6d6700 ffffffff8105a85b
[ 1238.995888] ffff8800cb6d6700 0000000000000000 0000000000000016 ffffffff8105abcc
[ 1238.995896] 0000000000000000 ffff8800cb6d6700 0000000000000016 0000000000000000
[ 1238.995904] Call Trace:
[ 1238.995908] <IRQ> [<ffffffff816e939e>] ? dump_stack+0x41/0x51
[ 1238.995930] [<ffffffff8105a85b>] ?
report_bad_irq+0x2c/0xb4
[ 1238.995939] [<ffffffff8105abcc>] ? note_interrupt+0x140/0x1c0
[ 1238.995947] [<ffffffff810590fc>] ? handle_irq_event_percpu+0xf3/0x101
[ 1238.995955] [<ffffffff81059135>] ? handle_irq_event+0x2b/0x46
[ 1238.995963] [<ffffffff8105b3cc>] ? handle_fasteoi_irq+0x71/0xa1
[ 1238.995971] [<ffffffff810038e1>] ? handle_irq+0x15/0x20
[ 1238.995978] [<ffffffff810035c8>] ? do_IRQ+0x40/0x95
[ 1238.995988] [<ffffffff816ef667>] ? common_interrupt+0x67/0x67
[ 1238.995997] [<ffffffff81030b6a>] ?
do_softirq+0x91/0x1d8
[ 1238.996006] [<ffffffff81030e30>] ? irq_exit+0x51/0xb9
[ 1238.996013] [<ffffffff81003608>] ? do_IRQ+0x80/0x95
[ 1238.996022] [<ffffffff816ef667>] ? common_interrupt+0x67/0x67
[ 1238.996025] <EOI> [<ffffffff81604576>] ? cpuidle_enter_state+0x4d/0x9e
[ 1238.996039] [<ffffffff8160456f>] ? cpuidle_enter_state+0x46/0x9e
[ 1238.996047] [<ffffffff81604689>] ? cpuidle_idle_call+0xc2/0x107
[ 1238.996055] [<ffffffff81008f9b>] ? arch_cpu_idle+0x5/0x14
[ 1238.996063] [<ffffffff81058951>] ? cpu_startup_entry+0xff/0x176
[ 1238.996072] [<ffffffff81ebfc96>] ? start_kernel+0x3bd/0x3c8
[ 1238.996080] [<ffffffff81ebf6fc>] ? repair_env_string+0x54/0x54
[ 1238.996084] handlers:
[ 1238.996091] [<ffffffff815b5ae2>] usb_hcd_irq
[ 1238.996095] Disabling IRQ #22
output from lspci -v suggests irg 22 has nothing to do with the card:
00:04.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1) (prog-if 20 [EHCI])
Subsystem: ZOTAC International (MCO) Ltd. Device a119
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fae7ec00 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=00a0
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci-pci
05:00.0 Multimedia controller: Digital Devices GmbH Device 0005
Subsystem: Digital Devices GmbH Device 0004
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at febf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit+
Capabilities: [90] Express Endpoint, MSI 00
Capabilities: [100] Vendor Specific Information: ID=0000 Rev=0 Len=00c <?>
Kernel driver in use: ddbridge