Stick USB Hauppauge Win TV duet (52009) & tvheadend recognizes it but does not work --> need help

Samquad Samquad

Hello,
I am using tvheadend 4.2.8-34 on RPI 4 8 Go (raspbian buster 32)

Pi hat TV work well and I want to add an additional tunerStick USB Hauppauge Win TV duet (model:52009).

it is supported by linux:

https://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-Duet-HD-Stick

When I plug it into the RPI it is recognized in TVheadend but does not work and prevents the pi hat TV from working

can you help me?

Thanks you

Saen Acro

Try with

 dmesg -T |egrep "firmware|dvb|frontend|usb"

To be more easy unplug wait 5 sec and plug it again.

Samquad Samquad

Thank you

The 2 tuners are green status in tvheadend but the scan is failed.

I also tried to associate the network of the pi hat TV which already has the channel scan but that afterwards no channel works with the pi hat tv.

Saen Acro

Post result of upper command.

Samquad Samquad

Commande:


dmesg -T |egrep "firmware|dvb|frontend|usb"

return this result:


[lun. janv. 11 07:33:25 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-01-08 14:31, variant start
[lun. janv. 11 07:33:25 2021] raspberrypi-firmware soc:firmware: Firmware hash is 194a85abd768c7334bbadc3f1911c10a7d18ed14
[lun. janv. 11 07:33:25 2021] usbcore: registered new interface driver usbfs
[lun. janv. 11 07:33:25 2021] usbcore: registered new interface driver hub
[lun. janv. 11 07:33:25 2021] usbcore: registered new device driver usb
[lun. janv. 11 07:33:25 2021] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[lun. janv. 11 07:33:26 2021] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x7fc took 44618 usecs
[lun. janv. 11 07:33:26 2021] usbcore: registered new interface driver r8152
[lun. janv. 11 07:33:26 2021] usbcore: registered new interface driver lan78xx
[lun. janv. 11 07:33:26 2021] usbcore: registered new interface driver smsc95xx
[lun. janv. 11 07:33:26 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[lun. janv. 11 07:33:26 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[lun. janv. 11 07:33:26 2021] usb usb1: Product: xHCI Host Controller
[lun. janv. 11 07:33:26 2021] usb usb1: Manufacturer: Linux 5.4.83-v7l+ xhci-hcd
[lun. janv. 11 07:33:26 2021] usb usb1: SerialNumber: 0000:01:00.0
[lun. janv. 11 07:33:26 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[lun. janv. 11 07:33:26 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[lun. janv. 11 07:33:26 2021] usb usb2: Product: xHCI Host Controller
[lun. janv. 11 07:33:26 2021] usb usb2: Manufacturer: Linux 5.4.83-v7l+ xhci-hcd
[lun. janv. 11 07:33:26 2021] usb usb2: SerialNumber: 0000:01:00.0
[lun. janv. 11 07:33:26 2021] usbcore: registered new interface driver uas
[lun. janv. 11 07:33:26 2021] usbcore: registered new interface driver usb-storage
[lun. janv. 11 07:33:26 2021] usbcore: registered new interface driver usbhid
[lun. janv. 11 07:33:26 2021] usbhid: USB HID core driver
[lun. janv. 11 07:33:26 2021] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[lun. janv. 11 07:33:26 2021] usb 2-1: New USB device found, idVendor=0781, idProduct=558b, bcdDevice= 1.00
[lun. janv. 11 07:33:26 2021] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[lun. janv. 11 07:33:26 2021] usb 2-1: Product: Extreme
[lun. janv. 11 07:33:26 2021] usb 2-1: Manufacturer: SanDisk
[lun. janv. 11 07:33:26 2021] usb 2-1: SerialNumber: 4C530000020522211284
[lun. janv. 11 07:33:26 2021] usb-storage 2-1:1.0: USB Mass Storage device detected
[lun. janv. 11 07:33:26 2021] scsi host0: usb-storage 2-1:1.0
[lun. janv. 11 07:33:26 2021] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[lun. janv. 11 07:33:26 2021] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[lun. janv. 11 07:33:26 2021] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[lun. janv. 11 07:33:26 2021] usb 1-1: Product: USB2.0 Hub
[lun. janv. 11 07:33:27 2021] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[lun. janv. 11 07:33:27 2021] usb 2-2: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.55
[lun. janv. 11 07:33:27 2021] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[lun. janv. 11 07:33:27 2021] usb 2-2: Product: USB3.1 Hub
[lun. janv. 11 07:33:27 2021] usb 2-2: Manufacturer: GenesysLogic
[lun. janv. 11 07:33:27 2021] usb 1-1.2: new high-speed USB device number 3 using xhci_hcd
[lun. janv. 11 07:33:27 2021] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.55
[lun. janv. 11 07:33:27 2021] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[lun. janv. 11 07:33:27 2021] usb 1-1.2: Product: USB2.1 Hub
[lun. janv. 11 07:33:27 2021] usb 1-1.2: Manufacturer: GenesysLogic
[lun. janv. 11 07:33:27 2021] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
[lun. janv. 11 07:33:27 2021] usb 1-1.3: New USB device found, idVendor=2040, idProduct=5200, bcdDevice= 0.01
[lun. janv. 11 07:33:27 2021] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[lun. janv. 11 07:33:27 2021] usb 1-1.3: Product: NovaT 500Stick
[lun. janv. 11 07:33:27 2021] usb 1-1.3: Manufacturer: Hauppauge
[lun. janv. 11 07:33:27 2021] usb 1-1.3: SerialNumber: 4035345063
[lun. janv. 11 07:33:27 2021] usb 1-1.2.3: new full-speed USB device number 5 using xhci_hcd
[lun. janv. 11 07:33:27 2021] usb 1-1.2.3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64
[lun. janv. 11 07:33:27 2021] usb 1-1.2.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[lun. janv. 11 07:33:27 2021] usb 1-1.2.3: Product: USB Serial
[lun. janv. 11 07:33:28 2021] usb 1-1.4: new full-speed USB device number 6 using xhci_hcd
[lun. janv. 11 07:33:28 2021] usb 1-1.4: New USB device found, idVendor=1997, idProduct=2433, bcdDevice= 1.06
[lun. janv. 11 07:33:28 2021] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[lun. janv. 11 07:33:28 2021] usb 1-1.4: Product: mini keyboard
[lun. janv. 11 07:33:28 2021] usb 1-1.4: Manufacturer:
[lun. janv. 11 07:33:28 2021] input:   mini keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1997:2433.0001/input/input0
[lun. janv. 11 07:33:28 2021] hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.11 Keyboard [  mini keyboard] on usb-0000:01:00.0-1.4/input0
[lun. janv. 11 07:33:28 2021] input:   mini keyboard Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:2433.0002/input/input1
[lun. janv. 11 07:33:28 2021] input:   mini keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:2433.0002/input/input2
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4: new high-speed USB device number 7 using xhci_hcd
[lun. janv. 11 07:33:28 2021] input:   mini keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1997:2433.0002/input/input3
[lun. janv. 11 07:33:28 2021] hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.11 Mouse [  mini keyboard] on usb-0000:01:00.0-1.4/input1
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.70
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4: Product: USB2.0 Hub
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4.2: new high-speed USB device number 8 using xhci_hcd
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4.2: New USB device found, idVendor=534d, idProduct=0021, bcdDevice= 1.21
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4.2: Product: AV TO USB2.0
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4.2: Manufacturer: MACROSIL
[lun. janv. 11 07:33:28 2021] usb 1-1.2.4.4: new high-speed USB device number 9 using xhci_hcd
[lun. janv. 11 07:33:29 2021] usb 1-1.2.4.4: New USB device found, idVendor=0bc2, idProduct=231a, bcdDevice= 7.08
[lun. janv. 11 07:33:29 2021] usb 1-1.2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[lun. janv. 11 07:33:29 2021] usb 1-1.2.4.4: Product: Expansion
[lun. janv. 11 07:33:29 2021] usb 1-1.2.4.4: Manufacturer: Seagate
[lun. janv. 11 07:33:29 2021] usb 1-1.2.4.4: SerialNumber: NA8PKBCG
[lun. janv. 11 07:33:34 2021] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[lun. janv. 11 07:33:34 2021] usbcore: registered new interface driver brcmfmac
[lun. janv. 11 07:33:34 2021] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
[lun. janv. 11 07:33:34 2021] dvb_usb: unknown parameter '#' ignored
[lun. janv. 11 07:33:34 2021] dvb_usb: unknown parameter 'Disable' ignored
[lun. janv. 11 07:33:34 2021] dvb_usb: unknown parameter 'the' ignored
[lun. janv. 11 07:33:34 2021] dvb_usb: unknown parameter 'remote' ignored
[lun. janv. 11 07:33:34 2021] dvb_usb: unknown parameter 'control' ignored
[lun. janv. 11 07:33:34 2021] dvb_usb: unknown parameter 'sensor' ignored
[lun. janv. 11 07:33:34 2021] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in cold state, will try to load a firmware
[lun. janv. 11 07:33:34 2021] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[lun. janv. 11 07:33:34 2021] usbcore: registered new interface driver uvcvideo
[lun. janv. 11 07:33:34 2021] usbcore: registered new interface driver snd-usb-audio
[lun. janv. 11 07:33:35 2021] dib0700: firmware started successfully.
[lun. janv. 11 07:33:35 2021] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in warm state.
[lun. janv. 11 07:33:35 2021] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[lun. janv. 11 07:33:35 2021] dvbdev: DVB: registering new adapter (Hauppauge Nova-TD Stick (52009))
[lun. janv. 11 07:33:35 2021] usb 1-1.3: media controller created
[lun. janv. 11 07:33:35 2021] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[lun. janv. 11 07:33:36 2021] dvbdev: DVB: registering new adapter (CXD2880)
[lun. janv. 11 07:33:36 2021] cxd2880 spi0.0: DVB: registering adapter 1 frontend 0 (Sony CXD2880)...
[lun. janv. 11 07:33:36 2021] usb 1-1.3: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[lun. janv. 11 07:33:36 2021] dvbdev: dvb_create_media_entity: media entity 'DiBcom 7000PC' registered.
[lun. janv. 11 07:33:36 2021] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[lun. janv. 11 07:33:36 2021] dvbdev: DVB: registering new adapter (Hauppauge Nova-TD Stick (52009))
[lun. janv. 11 07:33:36 2021] usb 1-1.3: media controller created
[lun. janv. 11 07:33:36 2021] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[lun. janv. 11 07:33:36 2021] usb 1-1.3: DVB: registering adapter 2 frontend 0 (DiBcom 7000PC)...
[lun. janv. 11 07:33:36 2021] dvbdev: dvb_create_media_entity: media entity 'DiBcom 7000PC' registered.
[lun. janv. 11 07:33:37 2021] dvb-usb: Hauppauge Nova-TD Stick (52009) successfully initialized and connected.
[lun. janv. 11 07:33:37 2021] usbcore: registered new interface driver dvb_usb_dib0700
[lun. janv. 11 07:33:37 2021] usbcore: registered new interface driver usbserial_generic
[lun. janv. 11 07:33:37 2021] usbserial: USB Serial support registered for generic
[lun. janv. 11 07:33:37 2021] usbcore: registered new interface driver ch341
[lun. janv. 11 07:33:37 2021] usbserial: USB Serial support registered for ch341-uart
[lun. janv. 11 07:33:37 2021] usb 1-1.2.3: ch341-uart converter now attached to ttyUSB0
[lun. janv. 11 07:33:41 2021] usb 1-1.3: DVB: adapter 2 frontend 0 frequency 0 out of range (45000000..860000000)
[lun. janv. 11 07:33:41 2021] cxd2880 spi0.0: DVB: adapter 1 frontend 0 frequency 0 out of range (174000000..862000000)
[lun. janv. 11 07:33:41 2021] usb 1-1.3: DVB: adapter 0 frontend 0 frequency 0 out of range (45000000..860000000)

Saen Acro

is there any other software use tv tuner?
<code class="shell"> lsof /dev/dvb/adapter0/frontend0 </code>

Samquad Samquad

no it is only for tvheadend.

I wanted to test with plex server but I deactivated its service after.

I have hyperion server on my RPI4 (with a USB grabber).

Samquad Samquad

command:

lsof /dev/dvb/adapter0/frontend0

return
nothing

Saen Acro


ls -l /dev/dvb

second one +*when tuner used*+


watch 'lsof |grep /dev/dvb'

Samquad Samquad

pi@rpi4:~ $ ls -l /dev/dvb total 0 drwxr-xr-x 2 root root 100 janv. 12 07:35 adapter0 drwxr-xr-x 2 root root 120 janv. 12 07:35 adapter1 drwxr-xr-x 2 root root 120 janv. 12 07:35 adapter2

command: watch 'lsof |grep /dev/dvb' return nothing on terminal

Samquad Samquad


lsusb

return

Bus 002 Device 003: ID 05e3:0626 Genesys Logic, Inc. Bus 002 Device 002: ID 0781:558b SanDisk Corp. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 1997:2433 Bus 001 Device 004: ID 2040:5200 Hauppauge Bus 001 Device 009: ID 0bc2:231a Seagate RSS LLC Expansion Portable Bus 001 Device 008: ID 534d:0021 Bus 001 Device 007: ID 05e3:0608 Genesys Logic, Inc. Hub Bus 001 Device 005: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsusb -d 2040:5200 -v

return

Bus 001 Device 004: ID 2040:5200 Hauppauge Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2040 Hauppauge idProduct 0x5200 bcdDevice 0.01 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x002e bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1

It's seem y have a problem ?
I have this message: "Couldn't open device, some information will be missing"

DeltaMikeCharlie

I know this this is an old thread, however, I encountered a very similar issue recently with x86 Ubuntu.

I found in a message log (probably via dmesg) that the kernel was unable to load the firmware file 'dvb-demod-{model number, etc}.fw'.

I found a copy of the missing file and installed it into '/usr/lib/firmware/dvb-demod-{model number, etc}.fw'. Once Linux had been rebooted and found the file, tvheadend was able to see the adapter AND scan for services.