Hi,
im switched from Tvheadend on Raspberry Pi to Synology - Docker - Tvheadend (4.3-1916~g1884300f0 from there
https://hub.docker.com/r/linuxserver/tvheadend)
Its all fine.. All old recordings work..
But if i want to record something new and the recording is at the end, or i manually stop it, Tvheadend becomes unresponsive..
Here the log:
2020-12-07 15:56:25,stdout,"[33m2020-12-07 15:56:25.417 [WARNING] mpegts: too much queued table input data (over 2MB) for SAT>IP DVB-S Tuner, discarding new[0m
"
2020-12-07 15:56:24,stdout,"[33m2020-12-07 15:56:24.609 [WARNING] mpegts: too much queued table input data (over 2MB) for SAT>IP DVB-S Tuner, discarding new[0m
"
2020-12-07 15:56:17,stdout,"[33m2020-12-07 15:56:17.581 [WARNING] mpegts: too much queued table input data (over 2MB) for SAT>IP DVB-S Tuner, discarding new[0m
"
2020-12-07 15:56:15,stdout,"[33m2020-12-07 15:56:15.381 [WARNING] mpegts: too much queued table input data (over 2MB) for SAT>IP DVB-S Tuner, discarding new[0m
"
2020-12-07 15:56:14,stdout,"[33m2020-12-07 15:56:14.579 [WARNING] mpegts: too much queued table input data (over 2MB) for SAT>IP DVB-S Tuner, discarding new[0m
"
2020-12-07 15:56:07,stdout,"[33m2020-12-07 15:56:07.575 [WARNING] mpegts: too much queued table input data (over 2MB) for SAT>IP DVB-S Tuner, discarding new[0m
"
2020-12-07 15:56:05,stdout,"[33m2020-12-07 15:56:05.376 [WARNING] mpegts: too much queued table input data (over 2MB) for SAT>IP DVB-S Tuner, discarding new[0m
"
2020-12-07 15:56:04,stdout,"[33m2020-12-07 15:56:04.577 [WARNING] mpegts: too much queued table input data (over 2MB) for SAT>IP DVB-S Tuner, discarding new[0m
"
2020-12-07 15:55:57,stdout,"[33m2020-12-07 15:55:57.569 [WARNING] mpegts: too much queued table input data (over 2MB) for SAT>IP DVB-S Tuner, discarding new[0m
Something happens at the end.. i dont't know what
The recording is at the right folder..
Any ideas?
Update: The recording also dies after ~15 Minutes.. Where can i search for this problem?