HTS Tvheadend 4.2.6-84~g81f56cc89
Raspberry pi 2B, Stretch OS (ran updates this am)
The receiver device seems fine when installed in laptop so I (think) it's ok.
When I power up the pi everything works fine, it scans ATSC channels like it's supposed to, all good. I use KODI as the front-end on a different computer in a different building through a local wired LAN.
Next day, no channels. Restart TVHeadEnd, do a scan , nothing. Re-boot pi, still won't scan in anything. I have to physically go and unplug the power (to the Pi) and plug it back in. Then the happauge stick powers up with the light on etc, I can go home and do a scan and channels work again... until next day.
Started doing this about a month ago, maybe an update?
-made sure "power save" wasn't enabled in the device setup
-RPI2B always accessible via SSH and TVHeadEnd web GUI
-using a powered USB hub that can supply 3a at 5.2v to the device, checks out under load (use a hacked USB cable to check voltage when Hauppage stick installed and operating)
-only the Hauppage device connected via USB. Nothing else.
Anyhting else I should be looking at? I could easily be missing something.
Should I upgrade the Pi to Buster?
Tnx in advance!
-G.