I adapted this information to the specific launch requirements of CE/LE installs.
This is what I did:
Step One:
First thing is to get you TVH server to detect the Digibit at least once, you need this so that you can go into the TVH web interface and extract the xml location on your SAT>IP tuner box.
Goto
TVHServer > Configuration TAB > TV Adapters > SAT > IP folder.
Go to the top level of the SAT > IP folder and select the Read-only Info, scroll down to the Location field and copy its contents.
eg in my case this contains:
http://192.168.1.3:38400/description.xml 1
Step two:
Log into the web interface of the Digibit Twin and select fixed IP address and make certain it matches the IP address that you copied in step one.
Doing this will likely crash TVH and Kodi so you will probably have to reboot your box.
Step Three:
SSH into you Coreelec box
Launch a terminal on your main comp
issue command “ssh root@192.168.1.14” replacing the IP address with the IP address of your box
Enter password of “coreelec”
Issue command “cd /storage/.kodi/addons/service.tvheadend42/bin”
Issue command “nano tvheadend42.start”
After line “chmod a+x $ADDON_DIR/bin/*”
add the line
TVH_ARGS_EXTRA=”–satip_xml the location you copied in step one ”
Take careful note of the fact the there is a double dash infront of satip_xml
eg in my case
TVH_ARGS_EXTRA="–satip_xml http://192.168.1.3:38400/description.xml"
Save and close Nano
Issue command “reboot”
That should be it and everytime you reboot it should always find you SAT > IP box.