Greetings Mark,
Mark Clarkstone wrote:
> Dagg Stompler wrote:
> > Mark Clarkstone wrote:
> > > Dagg Stompler wrote:
> > > > ok, to sum it up more clearly:
> > > > # no dmesg errors, only prints are fw download related (successful)
> > > > # tvheadend finds only radio channels in the T2.
> > > > # w_scan find nothing on T2 at all, here is the output:
https://paste.pound-python.org/show/uzTZt6juQ6koSMbQufI1/
> > > > also, the T broadcasting sometimes looses the sound.
> > > >
> > > > ideas?
> > >
> > >
Where in the world are you?
> > Israel
> >
> > > Can you go into the muxes tab, copy a play link and capture a T2 mux sample (about a minute) using wget, then upload it here?
> > I don't see any links under config->DVB inputs->Muxes tab, I've might haven't understood you correctly.
>
> If you go into the muxes tab there should be a play icon, right click that icon & select copy, then in a terminal type wget -O /tmp/tvhmux.ts
http://ip:port/stream_url
>
> replace (paste) the URL with the copied one.
ahh, now I see it, will try later today.
>
> >
> > > * You might want to open an issue with as much detail as possible. Include the mux sample and perhaps [[traces]] (set to tbl,parser).
> > here? at tvheadend's bug tracker? if so, what is a mux sample?
> >
> > btw, when I click force scan on a network, I see these in syslog:
> > Nov 30 16:23:30 utils_server tvheadend[5210]: linuxdvb: Unable to provide BER value.
> > Nov 30 16:23:30 utils_server tvheadend[5210]: linuxdvb: Unhandled ERROR_BLOCK_COUNT scale: 0
> > Nov 30 16:23:30 utils_server tvheadend[5210]: linuxdvb: Unable to provide UNC value.
> > Nov 30 16:23:30 utils_server tvheadend[5210]: linuxdvb: Unable to provide BER value.
> > Nov 30 16:23:30 utils_server tvheadend[5210]: linuxdvb: Unhandled ERROR_BLOCK_COUNT scale: 0
> > Nov 30 16:23:30 utils_server tvheadend[5210]: linuxdvb: Unable to provide UNC value.
> >
> > here are all the tvheadend related entries in syslog:
https://paste.pound-python.org/show/VM19tki9x1zmvn32ebec/
>
> Looking at this log it seems the signal is weak, as noted by "poll TIMEOUT".
so based on the assuption that the device and antenna are ok (it works without any issue on windows), it must be either the driver or the fw. my bet is the fw.
I'll try to see if there is another fw which differs from the one I use.
I do wonder:
# is there a way to extract the vendor's fw from the windows driver?
# if so, is it compatible with linux.
# last but not least, is there a way to get tvheadend working on windows?
Thanks